Question about Suzuki RM 125 Motorcycles

1 Answer

Location to check transmission fluid on 1982 suzuki rm125

Looking for the fluid check screw or bolt? need to know how much fluid it takes?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 149 Answers

On a rm 125??

Posted on Aug 30, 2009

  • Alex Aug 30, 2009

    on a rm 125??

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil level bolt located on a 1992 Suzuki rm125 dirtbike


Hi, Pete for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
how to change oil on RM250 Suzuki RM125 Owner Service Manual
OEM parts for Suzuki
http://www.autoevolution.com/moto/suzuki-rm125-1987.html#aeng_suzuki-rm125-1987-124

Jun 23, 2016 | Suzuki Motorcycles

1 Answer

1980 model. Where can I get a manual?


Search Results
  1. [PDF]OWNER'S SERVICE MANUAL

    www.crservice.dk/Suzuki%20cross/RM125/RM125K7_01A.pdf This manual is presented as a means whereby you can maintain your RM125 in top working condition at all times. Your riding skill and the maintenance.

Jun 18, 2015 | Suzuki RM 125 Motorcycles

1 Answer

How do I remove ignition key cylinder from 1982 Suzuki gs1100g motorcycle?


REMOVE THE TOP YOLK AND LOOK UNDER THE BOTTOM THERE ARE 2 SNAP SCREWS OR SECURITY BOLTS, IF SNAP SCREWS A VERY THIN CHISSELL AND TAP IT ROUND TO LOSEN IT, IF SECURITY screw u need a tool for it

Mar 15, 2015 | Suzuki Motorcycles

1 Answer

Describe how to change transmission fluid and filter in 1996 jeep grand cherokee straight 6


Assume since you say filter it is automatic.

Before starting the job obtain the fluid and filter for your vehicle. The parts store can provide you the right kind and amount of fluid based on Make Year Model. Also obtain new gasket.

Transmission must be cool.
Raise vehicle on jack stands.
Locate the fluid pan. Remove the side and front bolts.
Place a drain pan under the transmission capable of holding 8 quarts (two gallons).
Loosen the rear pan mounting bolts. Fluid should start to drain around the pan at the front. If not the pan is stuck. Pry it gently at the front with a flexible putty knife.
Once fluid is draining you can eventually take the rear bolts all the way out and pour off the balance of fluid.

Clean the gasket mounting surface on the transmission.

Clean the fluid pan completely.

Remove the old filter. It will be held with screws (bolts).

Install new filter.

Assure surfaces are still clean. Put new gasket in place, and install pan, tightening the bolts (screws) gradually until correct torque for your transmission is reached.

Take car off jack stands.

Add the correct amount of fluid for your vehicle through the filler tube. (Parts store can look this up when you are there).

Start with engine in park. Maintain idle, don't race engine.
Shift to each range setting, and then back to neutral.

Watch for leaks - if occur will need to repeat the procedure but the filter can be left in place.

jp

Sep 05, 2010 | 1996 Jeep Grand Cherokee

1 Answer

What is the proper way to check transmission oil level on my 03 rm250


Hello. The engine and the trans do NOT use the same oil. The engine oil is premixed with the fuel. The transmission oil is filled with the filler plug on the right side of the engine case. Look under the kick stand, see the 850 ml marking? The trans holds that much oil. Either drain the oil and add that exact amount.... OR you can take out the check screw located lower and forward of the oil fill on the case, should look just like a case bolt, but with an aluminum washer to seal it. Once you remove this bolt/plug you can add oil till the oil flow out this hole. Joe

Jun 09, 2010 | 2003 Suzuki RM 250

1 Answer

Engine revs up while idling


Check the Exhaust Valve actuating rod is firmly in it's bush and the actuating arm is screwed to the valve actuator...the diagram on this link below refers.
http://www.cmsnl.com/suzuki-rm125-2001-2005-usa_model16177/partslist/87624.html

Have you looked closely for air leaks between carby and engine, airbox obstructions or wrong sized pilot jet? Choke plunger thread not loose allowing extra fuel to surge through? Try turning air mixture screw IN half turn. The site below has the complete bike in exploded diagrams. Hope this all helps, good luck.
Cheers.

http://www.cmsnl.com/suzuki-rm125-2001-2005-usa_model16177/partslist/

May 10, 2010 | 2003 Suzuki RM 125

2 Answers

Locating transmission fluid


I believe those transmissions are computer controlled. There should be a light that comes on when you need to put more fluid in. Only way to actually KNOW how much is in there is to change the tranny filter/pan gasket and see how much drains out

Jun 02, 2009 | 1999 Honda Passport

2 Answers

Location of transmission (automatic) dipstick


You DO NOT have one.

There is a small bolt/plug in the transmission above the pan that needs to be removed. The fluid will run out if it's overfilled. The transmission needs to be at room temperature or a little warmer to check the level.


The fluid level screw is intended to be used for diagnosing a transaxle fluid leak or resetting the transaxle fluid level after service that involves a loss of fluid.
Inspect:
The fluid level should be checked when the transaxle is near Room temperature or at 40°C (104°F).
CAUTION: Removal of the fluid level screw when the transaxle fluid is hot may cause injury. Use care to avoid contact of transaxle fluid to exhaust pipe.
The engine must be running when the transaxle fluid level screw is removed, or excessive fluid loss will occur. Since the actual fluid level is unknown, stand clear when removing the fluid level screw. Have a container ready to capture any lost fluid.
WARNING: Do not turn the engine off with the fluid level screw removed as you can be injured by hot transaxle fluid being expelled out of the fluid check hole.

  1. Let vehicle idle for three to five minutes with accessories off.
  2. Apply brake
  3. Move shift lever through all gear ranges, pausing three seconds in each range.
  4. Place shift lever in Park. Important: Vehicle must be kept level on the hoist.
  5. Raise vehicle on hoist.
  6. Place oil container under fluid level screw.
  7. Remove the fluid level screw with the engine running at idle.
  8. Fluid level should be at the bottom of the fluid check hole. Because the transaxle operates correctly over a range of fluid levels, fluid may or may not drain out of the fluid check hole when the fluid level screw is removed. If fluid drains through the fluid check hole, this transaxle may have been overfilled. When fluid stops draining, the fluid level is correct and the fluid level screw may be installed. If fluid does not drain through the fluid check hole, the transaxle fluid level may be low. Proceed to ADDING TRANSAXLE FLUID.
  9. Install fluid level screw. Tighten 12 N.m (106 lb in)
  10. Lower vehicle.
  11. Shut off engine.
181efc6.gif
Adding Transaxle Fluid:
  1. With the engine running, add fluid at the vent cap location in half liter (1 pint) increments until fluid drains through the fluid check hole. Allow the fluid to finish draining through the fluid check hole.
  2. Install fluid level screw. Tighten 12 N.m (106 lb in)
  3. Lower vehicle
0e45832.gif

Mar 23, 2009 | 1996 Chevrolet Cavalier

4 Answers

Chevy cobalt check engine light is on


there is no way you can check the transmission you must take it to the dealer.that is what i was told

Aug 28, 2008 | 2005 Chevrolet Cobalt

2 Answers

Cannot locate the filler plug for the transmission. need to know where to add tranny fluid to


usually there is a dipstick for the tranny fluid. if you can find that you add the fluid through there with a funnel. other wise you will have to look on top of the tranny for a check plug.

Aug 01, 2008 | 2002 Isuzu Trooper

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...