Question about 2002 Harley Davidson FXST Softail Standard

1 Answer

Lost my rear turn signals 1 bulb burnt out changed it still doesn't work fuses are all good, all other lights work perfectly

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

Check your ground wire

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Why taillights do not come on, but the brakelights and signal lights work


check the fuses for a burnt fuse. the taillight circuit has its own fuse and wiring. its possible the headlight switch is bad but this doesn`t happen very often.

Aug 24, 2014 | 2004 Kia Sedona

1 Answer

Rear Turn signal is not working


Aren't your brake lights and turn signal lights on the same bulb, same filament? Recheck the bulb in the rear, as the rapid blinking is an indication of a burnt out bulb. If the bulb is the correct one and is good, check the connector and socket at the housing for a loose or poor connection.

May 26, 2012 | Dodge Durango Cars & Trucks

2 Answers

My additional brake light is not working i have tested the brake unit and that works is there a seperate fuse for this or is it all on one fuse for all the brake lights


The third or High Mounted Brake Light runs straight off the brake light switch on the brake pedal arm. You say you tested the "brake unit"? I assume you mean the third brake light assembly, and if you get power there when someone steps on the brake pedal, then the bulbs are bad.

The power flow for the brake lights goes like this: Fuse ->Brake switch -> Turn signal switch -> Rear lights. The only difference is, if you have a 3rd brake light in your rear window, that gets its power directly from the brake switch. It does not go thru the signal switch first. So, if you are having a brake light problem, and your fuses are good, check the 3rd light in the rear window, if it lights up (assuming the bulbs are good, no one ever changes them), then the problem is most likely in the turn signal switch, hope this helps!

Aug 28, 2011 | 2002 Ford SVT Focus

1 Answer

I drive a 2004 Toyota Sienna LE. Recently I changed a burnt out brake light bulb. I also changed a burnt fuse once my turn signals went spastic. After changing the burnt fuse, my signals now work fine. Now...


you have fitted a single pole bulb into a two pole socket ,have a good look at the end of the bulb and the look inside socket and you will see what i mean

Mar 15, 2011 | 2004 Toyota Sienna

1 Answer

1998 chevy lumina: rear window brake light not working, left brake light not working, rear left turn signal not working


See if bulbs have burnt out in the left brake light and rear turn signal (one bulb if combined) and also rear center high mount brake light.

If the left turn signal has a slower speed than the right turn signal, this is a symptom of a bulb or bulbs burnt out.

Usually, the wiring is not a problem, but I would not rule wiring (or sockets) as a problem out.

Good luck on this repair.

Jan 19, 2011 | 1998 Chevrolet Lumina

1 Answer

My left rear brake light is out. However the turn


Check the bulb. There are 2 elements in there and one is probably burnt off. Just change the bulb. Hope this helps.

Feb 03, 2010 | 2003 Chevrolet Silverado 1500

3 Answers

Left turn signal light flashes very fast and does not make the left rear taillight blink. I replaced the turn signal relay but still have same problem. Fuses checked out okay.


Change the left rear turn signal light bulb. It is probably burnt out! The fast blinking flasher is the clue you have a blown bulb.

Sep 24, 2009 | 1996 Dodge Neon

1 Answer

Turn signal will not ''flash'' on /off-cops pulled me over about it


The problem is most likely not a bulb and certainly not a fuse but the 'flasher'. The flasher is located under the driver's side A/C duct above the fuse box. It just plugs in so you shouldn't need any tools.

Dec 13, 2008 | 1991 Plymouth Acclaim

Not finding what you are looking for?
2002 Harley Davidson FXST Softail Standard Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...