The relay is stuck causing the blinkers to remain on usually as heat builds up in the relay it causes the metal contact to expand and flip off and once its cooled down it can make contact once again and give power to the blinkers this happens very quickly thus you get the turn signals blinking when turned on and will hear a clicking sound coming from the relay switch ,unless its faulty and needs to be replaced .
SOURCE: turn signals
Hi!
The reason for the indicators not flashing is that there isn't enough resistance to load the flasher unit, it need 4X21Watt bulbs making at total of 84Watts for it to work correctly. It may work with less but will flash erratically.
Hope this helped?
Press the Blue Button please to appraise my FREE! Effort.
Thank Y
ou !
Paul 'W' U.K.
SOURCE: '86 Shadow right front turn signal doesn't work
you may want to trace your wires to that light and check to make sure that your ground wire for that side is clean and tight that may take care of your problem all together
SOURCE: I have 1997 Harley Lowrider. Left turn signal
sounds like the bulb in the rear one has blown and needs replacing.
SOURCE: do not have rear turn signals but the front
The turn signals are controlled by the turn signal cancelling unit. There is a wiring sub-harness that take the turn signal wires to the rear turn signals. There should be two grey wires with a brown ring on one wire and a violet ring on the other. Trace these wires out and check for sorts or open circuits. Maybe the plug came unplugged. Good Luck
SOURCE: left turn signal not working proper
Turn signals flashing is the confirmation of alarm system being on.I thought both sides flashed but if alarm is faulty guess that's messed up too. Try starting from stratch with alarm,disarm it[disconnect neg wire at battery]then reconnect wire and when that sets off alarm turn it off in normal way.That should get things back on track.Plus,try replacing the flasher unit,don't know why this works but I've heard of it.
133 views
Usually answered in minutes!
×