Question about Motorcycles

1 Answer

The handle bar fails to control the front wheel and we have to adjust the bar every time with resct to the front wheel as it keeps twisting.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Motorcycles Master
  • 3,519 Answers

Hi Shreyasee:
This does not sound safe!
You don't give a make and model so I can only offer some suggestions that I hope will help.
The part that is attached to the frame that has the handlebars on top and the fork tubes on the sides is called the tripletree.
I'm guessing that the clamps are not hold ing the forks securely. If you straddle the front wheel, can you turn the handlebars from side to side so that the wheel is not pionting the same way as the handlebars? If so, that's where the problem is. Adjust it so it is pointing the right way, and then tighten the clamp bolts so that the forks are secure.
The same thing for the handlebars, only for up and down position.
Let us know how you make out.

Posted on Apr 29, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got a 1989 big bear it pulls to the right i put new tie rid ends and upper and lower balk joints in pulled cv axel it seems to be ok steering bearings seem fine also anyine have any ideas


Try aiming the handle bar straight and pull some kite string across the rear wheel , lightly touching the sidewalls of the tire. With the length of the string pulled across the front tire, adjust the outer tie rod so as to make front tire lightly touch the string. That should square the front tire to the back tire. Once the front and rear are squared, adjust tie rod in 1 turn for a slight negative toe. Do both sides while making sure to keep the handle bar straight during string and adjustment. That should help.

May 25, 2017 | Cars & Trucks

1 Answer

Twisted forks


Hi, Anonymous turn the handlebars all the way to the fork lock in the opposite direction the crooked wheel is pointing then kick the front off the wheel moderately until the bars line up with the wheel, for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
YZF600R Forums View topic Crooked handlebars
YZF600R Forums View topic How do adjust handlebars One handlebar against...
Yamaha YZF600 YZF600R 1994 2007 Service Repair Manual PDF Download Manuals...
OEM parts for Yamaha
Yamaha YZF600RP Owner Manual

Nov 09, 2013 | 2002 Yamaha YZF 600 R thunder cat

1 Answer

Hi have a bebecar travel city but dont know how to fold it down.help


To fold down a Tracker City, firstly make sure that the front wheels are locked into fixed, non-steering mode, and that the adjustable-height handle is in one of the middle positions.
Look at the twist-grip in the middle of the handle. Press the button and simultaneously twist the collar in the direction of the arrow. The chair should begin to close at this point.
Next, find the secondary lock device, which is operated by means of a lever/tab on one side of the handle. Pull this upwards, tilt the chair forwards and continue the closing action until it is fully closed.
Align the front wheel using your foot, if necessary, to prevent the rear wheel from hitting it. To store the chair, fold down the height-adjustable handle.
Don't forget to keep the pushchair well lubricated, preferably using a silicone spray.
Why not ask service@bebecar.co.uk for a user-guide for the Tracker City?

Nov 06, 2010 | Bebecar Tracker City U319 Stroller

2 Answers

How do i adjust the handle bars to go higher?


there is a nut on the lower part of the hadel bars you loosen that up then rais handel bars.

Jul 02, 2009 | Schwinn Meridian Adult 26-Inch 3-Wheel...

1 Answer

Raising the handlebar how do you do it?


PUT THE FRONT WHEEL BETWEEN YOUR KNEES AND TWIST HANDLE BARS FROM SIDE TO SIDE THEN SIDE TO SIDE AND UP AT SAME TIME THIS PART OF THE BIKE CAN BECOME RUSTED AND STICKY INSIDE TRY SOME WD40 OR ANY SORT OF OIL TO TRY AND GET IT MOVING AND BE SURE TO RE TIGHTEN NUT BEFORE USE HOPE THIS IS HELPFUL GLENN......

Nov 14, 2008 | Huffy 26in Mens Sante Fe Cruiser Bike -...

1 Answer

Twisted forks


and when the forks/bars/tripleclamps are straight the wheel goes towards the right. ii think they are twisted or bent. how much do new forks cost?Loosen your front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to turn the front end back straight. Tighten everything back up using a torque wrench and torqueing to the proper values from your service manual. Go ride and have fun. ,

Nov 10, 2008 | 2000 Husaberg Fe 501

1 Answer

Twisted forks


and when the forks/bars/tripleclamps are straight the wheel goes towards the right. ii think they are twisted or bent. how much do new forks cost?Loosen your front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to turn the front end back straight. Tighten everything back up using a torque wrench and torqueing to the proper values from your service manual. Go ride and have fun. ,

Nov 10, 2008 | 2000 Husaberg Fe 400

1 Answer

Twisted forks


and when the forks/bars/tripleclamps are straight the wheel goes towards the right. ii think they are twisted or bent. how much do new forks cost?Loosen your front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to turn the front end back straight. Tighten everything back up using a torque wrench and torqueing to the proper values from your service manual. Go ride and have fun. ,

Nov 10, 2008 | 2007 HM CRM 125R

1 Answer

Twisted forks


and when the forks/bars/tripleclamps are straight the wheel goes towards the right. ii think they are twisted or bent. how much do new forks cost?Loosen your front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to turn the front end back straight. Tighten everything back up using a torque wrench and torqueing to the proper values from your service manual. Go ride and have fun. ,

Nov 10, 2008 | 2007 HM CRE 125R

1 Answer

Twisted forks


and when the forks/bars/tripleclamps are straight the wheel goes towards the right. ii think they are twisted or bent. how much do new forks cost?Loosen your front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to turn the front end back straight. Tighten everything back up using a torque wrench and torqueing to the proper values from your service manual. Go ride and have fun. ,

Nov 10, 2008 | 2005 Hartford VR 150X

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...