Question about Harley Davidson Motorcycles

1 Answer

05 road glide running light works but every time I turn the ignition on it blows the brake light 15amp fuse

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Harley Davidson Master
  • 39,960 Answers

Hi Peter, you have a broken or exposed to to ground power wire. Get out your test lite and connect it to the power side of the fuse clip. Start at the tailight stabbing wires, conector block pins, ect. and work your way towards the front and rear brake light switches. When the test lite glows then you are very close to the problem. The web site below may assist you with a wiring diagram that comes close to your year and model.
http://officialharleyparts.com/wiring_diagrams.php
Good luck

Posted on Apr 26, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 333 Answers

SOURCE: rear brake lights wont work on our 2005 chevy aveo ????

It sounds like you should check for power at brake pedal switch. Hook up a test light to the switch and press the brake pedal. If the light does not go on and you have power in the wires to the switch then the switch should be replaced.
I hope this helps you out

Posted on Nov 24, 2008

  • 1042 Answers

SOURCE: # 4 fuse blew out,

I KNOW YOU HAVE AN ELECTRICAL SHORT.WAS AN ALARM INSTALLED OR ANY OTHER TYPE OF ACCESSORY? CHECK WITH DODGE TO FIND OUT ABOUT A RECALL.IF SOMETHING WAS INSTALLED, TAKE IT BACK THERE TO STRAIGHTEN IT OUT IF NOT HAVE A AUTO TECHNICIAN CHECK IT FOR YOU.

Posted on Dec 27, 2008

  • 58 Answers

SOURCE: 96 geo metro gets no spark with blown 15amp fuse

yes find out what that fuse is for. then you will have better idea. go to autozone.com and look at thier vehicle repair info and c if they tell you whats it for. or tell me the fuse box where this fuse is located

Posted on Jan 29, 2009

  • 1035 Answers

SOURCE: brake lights wont turn on.1994 gmc sierra.

This may sound too simple, but first verify that you are getting voltage to the light socket. Use meter on d.c. If you are getting voltage, and your bulb is good, it could be a bad ground. Don't overlook the brake light system goes through the directional signal in the steering column.

Posted on Feb 20, 2009

  • 1 Answer

SOURCE: gauges blow fuses,brake and turn signal lights dont work

all my gauges quit working and my turnsignals checked all my fuses under the hood and dash whats my problem?

Posted on Mar 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

05 g35 keeps blowing brake fuse and ABS came on instrument panel


try bringing it to your local auto parts store and have them scan it, most auto parts stores offer this as a free service.
Jay.. the pool pump repair guy longwood florida

May 08, 2014 | 2005 Infiniti G35

1 Answer

I have a 2005 land rover freelander in the engine fuse box the f3 fuse keeps blowing 15amp you start the truck go down the road fuse blows it starts runing ruff stop turn off truck then try to start wont...


15 amp is a fair current draw and for it to blow after a few minutes means that there is a short in that circuit that is allowing a drain to earth that just exceeds the 15 amp. It is in the ignition part of the system and may be a bad connection ( water ) or a problem appearing in the ECM or relay . Run fault codes to find the area of the fault. Because it is taking time to blow the fuse, it will be difficult to find. Check all wiring for rub marks .

May 07, 2014 | 2005 Land Rover Freelander

1 Answer

Horn doesn't blow wont crank when ignition turned on a 2003 dyna superglide


Harley horns fail. Replace the horn. If this fault has happened at the same time as engine wont crank then problem with wiring. If not then check starter relay (grey one). Also check ignition switch. Are the head lights coming on when turned on? If so the ignition switch is o/k. Connect a voltmeter to horn to check horn circuit. Accessory fuse 15 Amp supplies horn circuit and brake light and turn signal circuits so if these are working fuse o/k. Ignition/start circuit requires system relay and ECM fuse to be o/k. If fuel pump operates when run switch is activated then system relay o/k. Check start relay and circuit to start button.

Sep 15, 2013 | 2008 Harley Davidson FXD Dyna Super Glide

1 Answer

Fuse keeps blowing


Hi Anonymous, you have a hard/dead short that should be easy to find generally they are the easiest. Time to get out your test light and start tracking the wire from the power side of the switch, circuit breaker or the blown fuse receiver, when the test light quits lighting you are very close to your short. For a free wiring diagram please visit the website below and good luck.
Harley Davidson Wiring Diagrams and Schematics

Jul 02, 2013 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

Honda xr125 L blowing 15amp fuse while i was riding no lights or starter or horn


Sounds like a short like the insulation on wire rubbed off. Could also be a loose connection on either the hot or ground side of light circuit. This would blow a fuse.

Feb 27, 2013 | 2003 Honda XR 125 L

1 Answer

Brake Light,turn signals and horn not working


Hi Anonymous, you have a hard/dead short that should be easy to find generally they are the easiest. Time to get out your test light and connect it to the power side of the, circuit breaker or the blown fuse receiver, start by tracking the out bound wire towards the ignition switch and beyond if necessary, when the test light quits lighting you are very close to your short. For a free wiring diagram please visit the website below and good luck.
Harley Davidson Wiring Diagrams and Schematics

Aug 01, 2012 | 2007 Harley Davidson FLHX Street Glide

1 Answer

15 amp fuse blows and no running lights. What's wrong?


Hi Anonymous, you have a hard/dead short that should be easy to find generally they are the easiest. Time to get out your test light and connect it to the power side of the, circuit breaker or the blown fuse receiver, start by tracking the out bound wire towards the ignition switch and beyond if necessary, when the test light quits lighting you are very close to your short. For a free wiring diagram please visit the website below and good luck.
Harley Davidson Wiring Diagrams and Schematics

Apr 06, 2012 | 2006 Harley Davidson FLHX Street Glide

1 Answer

My 05 Harley electra glide wont start or light up


Hi Nicoleelizab, when checking for spark the CKP needs to measure the compression bump in order to send the correct signal to the ICM/ECM so always check for spark with either a third plug grounded or lift the end of the plug boot 1/2 " off one of spark plugs that are in the head. and the usual suspects are:
1. Fuel tank empty
2. Fuel supply valve turned off.
3. Fouled spark plugs.
4. Engine flooded with gasoline as a result of over use of enrichner.
5. Fuel valve or filter clogged.
6. Vacuum hose to automatic fuel supply valve disconnected, leaking, or pinched.
7. Discharged battery, loose or broken battery connections.
8. Loose wire connection at coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, spark plug cable connections loose,
or cables connected to wrong cylinders.
10. Ignition timing incorrect due to faulty ignition coil, ignition module, or sensors " Manifold Absolute Pressure" "Camshaft Position Sensor" "Crank Position Sensor" "Brake Apply Sensor
11. Engine lubricant to heavy ( winter operation )
12. Sticking or damaged valves or push rod wrong length.
13. Primary cam sproket spline sheared or missing spacer.
14. Security alarm system not disarming.
For a primary suspect please visit the website below: Good luck
Harley Diagnostic Codes 04 to Present

Jun 29, 2010 | 2005 Harley Davidson FLHTCUI Electra Glide...

2 Answers

I have a red key light and I have lost my turn signals and brake lights. I have running lights, head lights, cruise, spots and my security is working. The #2 fuse is blown, but when I change it it blows...


Sounds like bad brake light swich/sending unit.The one attached to master cyclinder.What happens to fuse if you turn ign. on,don't start engine,and hit brakes?Should bow fuse if switch is bad.

Mar 16, 2010 | 2005 Harley Davidson FLHT - FLHTI Electra...

2 Answers

Running Lights, Rear Lights and Dash Lights not working


Running lights in front sides of vehicle short out in time. I simply disconnected the plugs found inside the front wheel wells and packed them with grease for time being. When the weather improves I will find the chaffed insulation and repair. Replaced the 15amp fuse found under the hood and shwing, back on the road.

May 19, 2009 | 2001 Nissan Xterra

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...