Question about 2005 Honda CBR 600 RR

1 Answer

Why won't my 2005 CBR 600 RR rev past 3500 rpm?

Changed fuel pump, throttle bodies, tps, map, plugs

Posted by on

  • Warren Murray Apr 24, 2015

    Does it do this when riding or in neutral?.

  • Chris Aguilar
    Chris Aguilar Jun 15, 2015

    Both it doesn't matter

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

I have a few questions for you. 1. Have you owned the bike since it was new? 2. Have you been able to rev beyond 3500 rpm prior?

Posted on Apr 27, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2336 Answers

SOURCE: fuel petcock

The petcock is what the fuel flows through when it comes out of the gas tank. It probably includes: * A switch with positions for On, Off and Reserve. * A fuel line going to the carburetors. * A vacuum hose attachment which attaches to a carburetor which tugs on a rubber diaphram to let gas flow through. * An overflow/drip valve from the vacuum area. It's located right under the tank on the rear/left side.

Posted on Nov 10, 2008

tellme2
  • 137 Answers

SOURCE: max revs 14000 rpm.

hey m8,,,just looked at your problem,,to start with i need to uliminate a few things first,,is the bike restricted do u no,, to 33bhp,,that sounds the problem,, the restrictors could be in the carbs,to check this take the top of the carb off pull out the spring, and needle,, on the diaphram check theres no pin holes,by holdin it up to the light,,then on the needle u may see a bit of a plastic spacer or down the inside of the carb,if so then take that out or off,,and repeat this to all 4 carbs,,if nothing is visable,,then check the spark plug caps,and ht wires on the coil,, to be sure change all the plugs if they are not the plugs that should be in the bike,,see spec in a manual,4 the right heated spark plug,, and change the plug caps,try this first m8,, if still not havin any of it, ,shout andil anserw m8,, cheers

Posted on Jan 11, 2009

  • 2 Answers

SOURCE: honda cbr 600 rr 2005 fuel tank removal

I had an 07, I had to remove the lower and side fairings and then the bolts are visible, dont just lift it up because wires and the fuel line will be connected and tight. When you lift it, lift easily so you dont just rip everything, you should be able to lift it high enough to disconect the wires without damage.

Posted on Feb 20, 2009

  • 69 Answers

SOURCE: cbr 600 stalls afeter warming up

Sounds like a good tune up is needed. Also check the fuel system to be sure everything is clean and operating properly.

Posted on Mar 11, 2009

  • 12 Answers

SOURCE: 03 Honda cbr 600 rr motorcycle

now im not sure on this but when i had mine there was a bolt towards the tip take it out and the baffle should slide out from the exit

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My CBR 600f4i runs ok when cold but misfires at running temp and smells of fuel. No error codes are coming up. Can anyone help me? I have renewed the spark plugs.


Hi, Dave and the usual suspects are:
1. Spark plugs in bad condition or partially fouled.
2. Spark plug cables in bad condition and leaking check for spark leakage in the dark.
3. Spark plug gap too close or too wide.
4. Faulty ignition coil, module, and or sensor.
5. Battery nearly discharged.
6. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
7. Intermittent short circuit due to damaged wire insulation.
8. Intake air leak.
9. Water, dirt, or rust in the fuel system, fuel pump and/or filter.
10. Old dead or bad fuel.
11. Faulty fuel pressure regulator
12. Pinholes in the in tank plastic convoluted tubing from the pressure regulator to the quick disconnect check valve.
13. Fuel tank vent system plugged.
14. Throttle body controls misadjusted.
15. Damaged throttle body or intake seals.
16. Loose, dirty, or corroded ignition module connector at crankcase.
17. Faulty TPS, MAP, CKP, O2, and/or CMP sensors.
18. Incorrect valve timing.
19. Weak or broken valve springs.
20. Damaged intake or exhaust valve'
21. Control module may be in "LIMP" mode
22. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Misfiring please help CBR Forum Enthusiast forums for Honda CBR Owners
Honda CBR600F4I 2001 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F4i Owner Manual
Honda CBR 600 F4i 2005

Apr 04, 2017 | 2001 Honda CBR 600 F(4)i

1 Answer

2005 Honda CBR 600 RR turns over will not start


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch lever, or kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Starter turns over but bike will not start CBR Forum Enthusiast forums for...
What Do Check When My Motorcycle Won Start Honda Shadow Forums Shadow...
2005 2006 Honda CBR600RR Service Manual Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

May 08, 2014 | 2005 Honda CBR 600 RR

1 Answer

2005 Honda CBR 600 RR cut out now won't start


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery must have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
2. Faulty alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Faulty main circuit breaker or ignition switch, check for loose connections and continuity.
5. Faulty system and or ignition relay, check for continuity.
6. Faulty ignition coil, ignition/electronic module.
7. Faulty CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Faulty neutral, side stand or clutch lever safety switch.
10. Fuel tank empty
11. Fuel tank contaminated with ethanol sludge.
12. Water or dirt in the fuel system, or clogged filter.
13. Restricted, blocked or kinked fuel line.
14. Faulty fuel pump.
15. Faulty pressure regulator.
16. Faulty or clogged fuel injectors.
17. Lean angle switch is faulty or needs adjustment.
For more information about your issue and valuable "FREE" downloads that you need please click on the blue links below. Good luck and have a wonderful day.
2004 CBR600RR won start ecu issues Honda Motorcycles FireBlades org
HONDA CBR WONT START TRY THESE TIPS
2005 2006 Honda CBR600RR Service Manual Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Dec 31, 2013 | 2005 Honda CBR 600 RR

1 Answer

2005 Honda CBR 600 RR will not start


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch lever, or kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How To Fix Headlights Not Turning On Issue
What Do Check When My Motorcycle Won Start Honda Shadow Forums Shadow...
2005 2006 Honda CBR600RR Service Manual Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Mar 15, 2013 | 2005 Honda CBR 600 RR

1 Answer

2005 Honda CBR 600 RR cuts out


Hi, Muneebrashee and the usual suspects are:
1. Severely discharged or a damaged battery must have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
2. Faulty alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Faulty main circuit breaker or ignition switch, check for loose connections and continuity.
5. Faulty system and or ignition relay, check for continuity.
6. Faulty ignition coil, ignition/electronic module.
7. Faulty CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Faulty neutral, side stand or clutch lever safety switch.
10. Fuel tank empty
11. Fuel tank contaminated with ethanol sludge.
12. Water or dirt in the fuel system, or clogged filter.
13. Restricted, blocked or kinked fuel line.
14. Faulty fuel pump.
15. Faulty pressure regulator.
16. Faulty or clogged fuel injectors.
17. Lean angle switch is faulty or needs adjustment.
For more information about your issue and valuable "FREE" downloads that you need please click on the blue links below. Good luck and have a wonderful day.
2005 Honda CBR 600 RR turns off while driving
2004 CBR600RR CUTS OUT WHILE RIDING
2005 2006 Honda CBR600RR Service Manual Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Aug 28, 2011 | 2005 Honda CBR 600 RR

1 Answer

1998 Honda Fireblade CBR 900 RR won't rev past 6500 RPM


Hi, Gingerteddyb for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.fireblades.org/forums/honda-fireblade/80184-rev-limit-cbr900.html
bike will not rev past 8k like hitting the rev limiter
Honda CBR900RR Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR900RR Fire Blade Owner Manual

Aug 15, 2010 | 1998 Honda CBR 900 RR Fireblade

1 Answer

2004 Honda CBR 1000 RR Fireblade misses at low speed


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or partially fouled.
2. Spark plug cables in bad condition and leaking check for spark leakage in the dark.
3. Spark plug gap too close or too wide.
4. Faulty ignition coil, module, and or sensor.
5. Battery nearly discharged.
6. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
7. Intermittent short circuit due to damaged wire insulation.
8. Dirty air filter
9. Intake air leak.
10. Water, dirt, or rust in the fuel system, fuel pump and/or filter.
11. Old dead or bad fuel.
12. Faulty fuel pressure regulator
13. Pinholes in the in tank plastic convoluted tubing from the pressure regulator to the quick disconnect check valve.
14. Fuel tank vent system plugged.
15. Throttle body controls misadjusted.
16. Damaged throttle body or intake seals.
17. Clogged or faulty fuel injectors.
18. Loose, dirty, or corroded ignition module connector at crankcase.
19. Faulty TPS, MAP, CKP, O2, and/or CMP sensors.
20. Incorrect valve timing.
21. Weak or broken valve springs.
22. Damaged intake or exhaust valve.
23. The control module may be in limp mode.
24. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.fireblades.org/forums/honda-fireblade/100266-2006-cbr-1000rr-stumbling-low-rpms.html
Bikes cutting out at High RPM
2004 2005 CBR1000RR Fireblade Repair Manual Download Manuals Technical $10
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR1000RR Fireblade Owner Manual

Jun 29, 2010 | 2004 Honda CBR 1000 RR Fireblade

1 Answer

Max revs 14000 rpm.


hey m8,,,just looked at your problem,,to start with i need to uliminate a few things first,,is the bike restricted do u no,, to 33bhp,,that sounds the problem,, the restrictors could be in the carbs,to check this take the top of the carb off pull out the spring, and needle,, on the diaphram check theres no pin holes,by holdin it up to the light,,then on the needle u may see a bit of a plastic spacer or down the inside of the carb,if so then take that out or off,,and repeat this to all 4 carbs,,if nothing is visable,,then check the spark plug caps,and ht wires on the coil,, to be sure change all the plugs if they are not the plugs that should be in the bike,,see spec in a manual,4 the right heated spark plug,, and change the plug caps,try this first m8,, if still not havin any of it, ,shout andil anserw m8,, cheers

Jan 11, 2009 | 2004 Honda CBR 600 RR

Not finding what you are looking for?
2005 Honda CBR 600 RR Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Mike

Level 3 Expert

4339 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...