Question about 2006 Suzuki Boulevard C90T
Try removing positive cable from batt. for 5min.
replace turn ign. switch on about 5sec. dont crank it.
cut it off.now crank it.
see if that correct he problem
Posted on Jul 10, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
By carefully studying the lighting system on my bike I was able to determine how to remove the light bar by removing two alan bolts on the underside of the light bar and in between the forks. Once the light bar was removed I was able to gain access to the philips screw which holds the signal light on the bar. After removing that screw I traced the wiring back to the head light where I noticed that the head light itself needed to be removed in order to gain access to the wiring inside the headlight assembly. Once inside I was able to unplug the two wires which lead to the signal light and then pull them through the light bar and remove the broken signal light. Replacing the new signal light was simply a matter of reversing the process.
Thanks for getting back to me though. By taking the time to study the situation, I learned more about my bike.
Posted on Aug 16, 2009
It is not under the cover, If you find one there then you must be riding an 800cc C50.
The filter is under the so called 'tank'. To change it you need to remove the chrome speedo housing, unplug the instruments and you will see it up near your headstock. Remove the three screw that hold it in place and you will be able to lift it out.
Posted on Jun 12, 2010
the altanator is under the left side cover that bulges out, to test the out put with a meter find the plug with the 3 yellow wires that comes from that cover and test with meter set on ac volts 0 to 100 range. put the leads between the wires with them unplugged from harness, test all combantions and you should get about 60 ac volts when you rev motor to 3500 rpm. if this checks good you need the rectifier/regulator not the stator.
Posted on Sep 11, 2010
There is no dipstick on suzuki . Stand beside your bike and look on the bottom right side of your crankcase . look for a little site glass window . That is how you
check . if the oil is half way up the glass when you stand bike straight up . . change every 3000, plus filter
Posted on Oct 19, 2010
Tips for a great answer:
May 07, 2017 | 2013 Suzuki Boulevard C90T
Apr 17, 2016 | 2005 Suzuki Boulevard C90
Aug 25, 2015 | 2009 Suzuki Boulevard C90T
Apr 15, 2014 | 2006 Suzuki Boulevard C90T
Mar 25, 2013 | 2006 Suzuki Boulevard C90T
Apr 02, 2010 | 2005 Suzuki Boulevard C90T
Dec 24, 2009 | 2005 Suzuki Boulevard C90T
May 02, 2014 | 2006 Suzuki Boulevard C90T
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: