Question about 2005 Harley Davidson FXDWG - FXDWGI Dyna Wide Glide

1 Answer

When i turn the ignition switch on my left blinker flashes 5 times then my turn signals dont work...i recently changed the speedometer...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 122 Answers

There is a problem they accidently misplaced and plugged the couplers.try open the mask and look for defaults.

Posted on Apr 21, 2015

Testimonial: "it was a used speedometer . Do I need to get the computer flashed??"

  • 1 more comment 
  • R.Karthikeyan
    R.Karthikeyan Apr 21, 2015

    no buddy thats not a problem.dismantle the head and look inside.

  • Christopher Rauch
    Christopher Rauch Apr 21, 2015

    evrything is plugged in the right way under the speedo.... not sure where to go from here

  • R.Karthikeyan
    R.Karthikeyan Apr 22, 2015

    yes there is an unit for controlling the headlight functions find the unit and change it...hint: follow wiring harness from head lamp and indicators...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a trailer hooked up to my enclave the right turn signal blew out on trailor now my right turn signal on my truck dont work and my key wont come out of igntion


How to get your key out of the ignition if it gets stuck ...

? 1:21
https://www.youtube.com/watch?v=bctxs0Yj4Wc
Oct 24, 2012 - Uploaded by stanley saintlouis
How to get your key out of the ignition if it gets stuck! ... Chevy Impala Monte Carlo Buick Pontiac - Won't Shift ...

Key Stuck in the Ignition ' Here's What to Do

locksmith-orlando.org/key-stuck-ignition-heres/
Nov 3, 2014 - One of the most stressful moments as a driver is when your Key Stuck inthe Ignition and you are in a hurry. You can't simply leave your key in ...

Pontiac Grand Prix Questions - when I put my car in park it ...

www.cargurus.com > Questions > Pontiac > Grand Prix

CarGurusJul 28, 2013 - She put the actual key in the ignition and almost could pull it out. She called ... ignition stuck in an on position stering column locked 1 answer.

key stuck in ignition? ' Yahoo Answers

how do i fix my turn signal/blinker? - CarGuruswww.cargurus.com > Questions > Dodge > Ram 1500CarGurusMay 3, 2013 - My right rear turn signal is not working. ... Thanks for the input. just parked my truck for the night and realized the hazard light does not flash on ...Clearlake is the poorest place to live in California...we don't have pavement or ...GM Turn Signal Problem Fix - Directional Relay ... - YouTube? 5:38https://www.youtube.com/watch?v=y4QVUBVVVpIMay 3, 2014 - Uploaded by Steve O+Steve O I just change my turn signal switch it was workingthen it stop. ... store to see or can you help I'm having all those problem you said with my truck. .... leds all the ambers flash at the same time when I hit the left or right.


Jan 11, 2016 | Cars & Trucks

1 Answer

How do i reset a pin number on a harley


With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Apr 16, 2013 | 2009 Harley Davidson FXD Dyna Super Glide

1 Answer

I HAVE A 2007 HARLEY DAVIDSON CLASSIC SOFTTAIL. SECURITY SYSTEM PROBLEM. I HAVE REPLACED BATTERY & KEY FOB STILL COMPUTER WILL NOT ALLOW ME ENTRY TO DISARM & WILL NOT CRANK. DID STEP BY STEP OWNER...


If you do not know the security code, you can reset it to your own choosing.
With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Once PIN is set (either new or old PIN), to disarm security system, DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Feb 28, 2013 | 2007 Harley Davidson FXSTC Softail Custom

1 Answer

My immobiliser wont let me start the bike


This may help you ... http://www.youtube.com/watch?v=RTy_JKI9cQ0 ... probably not.

Resetting your security system depends on which system you have. To do any of them, you must have the fob. If you don't have the fob, only Harley can clear. Be prepared to prove ownership when you arrive.

To reset the code with a TSSM equipped bike, you will:
1) Set your kill switch to off
2) Quickly turn the ignition switch on, off, on, off, on
3) Immediately press and let go of the left turn signal switch twice (press, let go, press, let go)
4) Press and let go of your fob button twice (press fairly hard, it's designed to resist being pressed by keys and what not in your pocket)
5) Current PIN number will be displayed on odometer
6) Change the PIN by pressing the left signal until the desired number is reached
7) Press the fob button twice to cycle to the next number and repeat step 7
8) Press and let go the right signal and turn ignition off when 5 digit PIN is satisfactory
NOTE: Steps 2 through 4 must be completed in quick succession of each other.

Now you can have the bike armed, and disarm with the PIN (example PIN will be 25522 in the following steps):
1) Ignition switch to Accessories
2) Immediately press both turn signals at the same time (red key light on you speedometer will flash rapidly if done right)
3) Press and let go the left signal 2 times
4) Press and let go the right signal once
5) Press and let go the left signal 5 times
6) Press and let go the right signal once
7) Repeat for each of the last three numbers of the PIN (left 5 times, right once, left 2 times, right once, left 2 times, right once)
8) Red key on speedo will stop blinking if done right (security has been disarmed)
NOTE: Steps 2 through 7 must be completed in quick succession of each other.



To reset the code with a HFSM equipped bike, you will:
1) Have your key fob near the bike
2) Set your kill switch to off
3) Quickly turn the ignition switch on, off, on, off, on
4) Immediately press and let go of the left turn signal switch twice (press, let go, press, let go)
5) Press and let go the right signal once
6) Current PIN number will be displayed on odometer
7) Change the PIN by pressing the left signal until the desired number is reached
8) Press the right signal to cycle to the next number and repeat step 7
9) Turn ignition off when 5 digit PIN is satisfactory
NOTE: Steps 3 through 5 must be completed in quick succession of each other.

Now you can have the bike armed, and disarm with the PIN (example PIN will be 25522 in the following steps):
1) Ignition switch to on
2) Immediately press both turn signals at the same time (red key light on you speedometer will flash rapidly if done right)
3) Press and let go the left signal 2 times
4) Press and let go the right signal once
5) Press and let go the left signal 5 times
6) Press and let go the right signal once
7) Repeat for each of the last three numbers of the PIN (left 5 times, right once, left 2 times, right once, left 2 times, right once)
8) Red key on speedo will stop blinking if done right (security has been disarmed)
NOTE: Steps 2 through 7 must be completed in quick succession of each other

Feb 24, 2013 | 2010 Harley Davidson FXDF Fat Bob

2 Answers

My left blinker doesnt flash on my 97 mazda miata


replace the left blinker relay, located in the fuse panel.

Dec 21, 2012 | Cars & Trucks

1 Answer

Lost key fob how to turn off alarm?


You'll need the PIN number.
If you don't know it, you'll have to change it to a 5 digit PIN number you select.

With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Once PIN is set (either new or old PIN), to disarm security system, DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Nov 06, 2011 | 2008 Harley Davidson FLHR Road king

1 Answer

I've charged my battery, but my bike still won't start. Also, the security light is on, but I have my key fob in my pocket.


The usual reasons the fob doesn't disarm the security system is:
1) a damaged fob
2) discharged fob battery (Panasonic 2032 or equivalent)
3)electromagnetic interference
a. verify the fob in not in a metal enclosure or within 3" of any other electronic device.
b. place the fob on the seat, start motor and return fob to pocket.
c. move the bike at least 15' from the spot of interference.
With the Fob near the bike, try disabling the security system.

You'll need the PIN number.
If you don't know it, you'll have to change it to a 5 digit PIN number you select.

With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Once PIN is set (either new or old PIN), to disarm security system, DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Feb 03, 2011 | 2008 Harley Davidson FLHRC Road King...

2 Answers

Lost my FOB I have a new one but I cant turn the alarm off, I called harley and they said to turn on the bike and immediatly push both left and right blinker buttons, Ive done this probably 30 times and it...


OK so here is your solution. from your dealer when you purchased your bike with the alarm system you were given a 5 digit pin number. in order to turn it off manually you need to unlock (if locked) the switch, turn it to accessory.
push both left and right blinker buttons in
with the left blinker button is you "digits" so if (ex 56726) push the left button five times
to go to the next button push the right blinker one time then left six times
the right blinker one time and left blinker seven times
then right two times right once
left six times and right once. this will turn off the alarm

to program the fob you need to turn the ignition switch in a sequence of
on off on off on
with the blinker buttons you push
left left right left and your signals will flash the hazards twice
push and hold the fob button till the hazards blink three times and you have just programed your fob
push and hold your fob to set alarm and double click to disarm your alarm

Dec 12, 2010 | 2005 Harley Davidson FLSTN- FLSTNI Softail...

2 Answers

Security system FOB inactive, battery good, no pin. Need to disarm. What can we try next?


You'll need the PIN number.
If you don't know it, you'll have to change it to a 5 digit PIN number you select.

With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Once PIN is set (either new or old PIN), to disarm security system, DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Sep 05, 2009 | Harley Davidson FLSTFI Fat Boy Motorcycles

Not finding what you are looking for?
2005 Harley Davidson FXDWG - FXDWGI Dyna Wide Glide Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...