Question about 1988 Honda GL 1500 Gold Wing

2 Answers

I started the engine, but then after a minute it started to lose power and stopped. I opened the choke fully, started it again but it failed shortly after, and would not start again

Feels like the carbs ran out of fuel...

Posted by on

  • Yvon Hade
    Yvon Hade Apr 15, 2015

    There is fuel coming out of the fuel line out of the pump. Where to go next? Thanks

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Honda Master
  • 661 Answers

I agree it's probably got a problem with the fuel pump.if it started with choke then cut out soon after its a fuel problem either no fuel fuel blockage or faulty fuel pump

Posted on Apr 15, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 10,875 Answers

Make sure the floats arent stuck too

Posted on Apr 15, 2015

  • adam bikedoc Apr 15, 2015

    they would have to be stuck on all six cylinders ,so I doubt its that

  •  johnny rebel
    johnny rebel Apr 15, 2015

    only have to be stuck on 1 cylinder to make it run like sh i nola

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Exmark lazer HP 19 Kawasaki 50" deck new PTO and new relays blades engage for 30 minutes then shut off engine on. After cooling will engage for 10 minutes then shut off


Engine valves need adjusting.
symptoms: starts ok, runs until engine reaches max temp loses power then stops. can't restart when hot. once restarted runs for a while stops again.

There is very little clerance in these valves and temperature alters the lenth by a few thou and the valve don't close fully losing compression, once cold the valves shrink back enough to create enough compression to start again.

Aug 13, 2015 | kawasaki Garden

1 Answer

Cold choke baffle has 3/16 opening minute I pump accelerator choke thermostat closes primary baffle shut no air to start I force choke open to start why insufficient air to run at high idle?


Your engine probably has an automatic choke device that adjusts automatically with engine temperature. To set the choke when the engine is cold you have to depress the accelerator to the floor and release it completely. You shouldn't have to depress the accelerator again to start the engine, turn the key the engine should start. As the engine begins to warm up it will also begin to initially run faster then it will start to run rough. At this point you have to press the accelerator and release it again. The auto choke mechanism should allow the choke butterfly to open. There may be a number of stops in the system and the choke butterfly will stop again still not fully open and only become fully open when the engine is at operating temperature. Hope this answers you question, Rgs. Bob

Jun 21, 2015 | Cars & Trucks

1 Answer

Talon at3351


Choke is an adjustment to air intake to adjust fuel/air mixture and is heat related. Do not fully open choke as soon as it starts. Gradually open as the trimmer warms up. If a happy medium can not be found then fuel adjustments will be needed on carburetor.

Jun 05, 2014 | Electronics - Others

1 Answer

Car loses power for short time after normal running and cooling down for ten minutes


sounds to be symptomatic of a CTS (coolant temperature sensor). there are two, one is for the interior temp gauge, the other is for the ECU/PCM while both are basicalty the same part, often even the same P/N, they both do extremely different things.

Feb 24, 2014 | Ford Ka Cars & Trucks

1 Answer

Will not run without manuely chocking


Sounds like the unit has sat, and carb gum, Try draining the carb bowl and re-filling. There is a screw at the base of the bowl. Also make sure when cold choke is closed. And it opens fully after 3 minutes. Check battery voltage on choke coil.

Dec 17, 2013 | Onan 5500 Microquiet Generator

1 Answer

I have a 24" snowblower that surges after 1 minute of running, after 3-4 minutes stops and will not restart until several hours later, does the same thing over and over


This sounds like a choke issue. Do you have a choke on that engine?

The purpose of a choke is to allow for a varying air:fuel ratio depending on how hot the engine is. A cool engine needs a more rich mixture of fuel to air. Once the engine warms up, it runs best with more air. The Choke is a mechanism that allows the operator to manually adjust this mixture. Generally, the choke is closed to start a cold engine, then is opened in 2 or 3 stages as the engine warms up. As the operator, as the engine starts to run smoothly, you would actuate the choke to the next notch, changing the fuel:air ratio so more air is mixed in with the fuel. It's probably best to give the engine a few minutes to warm up while you progress through the choke stages until it's fully open providing the best mixture for operation prior to beginning to clear the snow.

If you follow that process and the engine stalls when the choke is opened, then you need to clean your carburetor.

Oct 18, 2012 | Garden

1 Answer

Lt1050 black smoke after 15 minutes


The black smoke and black spark plugs indicate that the engine is running very rich (ie too much fuel). This could be caused by the choke not opening fully after the engine starts and the fuel mixture is too rich OR the fuel mixture setting is opened too far.
Check the choke lever, make sure the choke is fully open when the choke is in the running position.
When the engine is running with the throttle is in the 3/4 rev position then adjust the fuel mixture to get the highest RPM.

Apr 19, 2012 | Cub Cadet Garden

1 Answer

My Vespa PX125 Disc loses power on the journey.


adjust air mixture screw at rear of carb tighten it first then loosen it 1& half turns give it a go

Apr 17, 2010 | Peg Perego Vespa Scooter

1 Answer

Truck losing power and service engine soon light on


Like to other guy said, give it a tuneup. Also try SEAFOAM to clean carb up of slug. Also check to make sure the butter fly for the choke has not come loose, causing it the choke it down. Failed choke pull-off.

Dec 10, 2008 | 1995 GMC Sonoma

Not finding what you are looking for?
1988 Honda GL 1500 Gold Wing Logo

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...