Question about Motorcycles

1 Answer

What is my bikes problem..was riding ti and it just died..try to restart and it jus a small click and nothing ..like sumthing is jammed

Has new battery and tried to bypass starter by using screwdriver but same results

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 700 Answers

Would first check all connections if they are not loose, start from battery terminal, tighten it up, fuse, switch and then starter motor.



your starter motor need check, bendix most probably jammed and hence the click. I would suggest tapping it few times should retract it to correct position and would allow you to start.



would suggest removing starter motor from the vehicle, clean it well, check brushes and check if electromagnet is correctly retracting.



hope this will help you (not with spelling and grammar...) - do not forget to vote...

Posted on Apr 14, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I cure vapor lock?


If you're getting vapor lock, the bike will die after a few miles, and not restart for several minutes.
If the bike dies, immediately remove the gas cap and see if the bike will restart right away.
You could also ride it without the gas cap (try it on a tank that's 1/4-1/2 full, NOT fully full, because of gas splash) and see if it doesn't die after a few miles.

May 07, 2014 | 2001 Harley Davidson FLSTC - FLSTCI...

1 Answer

Bike won't start after it died while riding


you CDI unit may have burned out or there's oil at the piston or there oil in the carborator

May 13, 2013 | 1984 Honda VF 500 F

2 Answers

04 Gsxr600 jerking and engine dies after riding for awhile.


I have an 05 with the same problem. Sounds like your STVA went out. Do you still have your butterflies wired open? I know how to repair the stva fixed mine, and saved hundreds....if your still on this post email me so we can get our bikes fixed. also check your kick stand sensor! This can malfunction and cause same stalling problems.

Apr 22, 2012 | 2004 Suzuki GSX-R 600

1 Answer

Hi there,i have a honda cbr 600f (1995) with a 3 month old battery,i left the bike for two and 1/2 weeks without starting it,the bike started on 1st first time, went for a long ride(60 miles).Stopped for a...


sir,there are 2 reason
1. please check bolts of small fuse connecter near the battery ,sometimes it get loose ,ectually that is main positive connecter to battery
2.please replug the rectifier-regulater cuplers ,otherwise you need to replace the regulater

Apr 27, 2011 | 1996 Honda CBR 600 F(3)T

1 Answer

Harley won't start ... starter not working custom softail ... 80 ci v twin engine... nothing happens when I push the starter button.... battery is fine and all lights work... clicking sound under seat...


That clicking sound you are hearing may be a circuit breaker tripping indicating a short circuit somewhere. I think the starter circuit is powered by the ignition circuit. If you have a short circuit in your ignition system the breaker will trip killing power to your ignition, thus the engine dying, and preventing power for the starter circuit preventing the bike from being restarted.

On your bike, I believe there is a chrome coil cover over the coil on the left side of the bike. Check and see if this cover has come loose. I've seen them come loose and fall down on the coil connector on top of the coil shorting it out. If that ain't it, just keep looking, there's a short somewhere. Good Luck

Mar 30, 2010 | 2005 Harley Davidson FLSTF - FLSTFI Fat...

1 Answer

1990 FZR 600 - Battery problems? drainage?


this is yours jarnater or regulater problem same problem to me i have fzrr 400 but i install a new regulater and then i solve my problem

Feb 18, 2010 | 1990 Yamaha FZR 600

2 Answers

93 gsxr 750. engine dies after riding a few miles


Does it restart after a few minutes?
Then, check the fuel filter and hoses, could be clogged ;-)

Mar 25, 2009 | 2002 kawasaki ZX-6R

1 Answer

Need help bike died while riding


everything working perfect. Wednesday night i was riding home from work and got about halfway home bike had a small bog while coming up for a turn onto another street pulled in the clutch and stall. Rolled to a stop and fired the magic button. The motor would turn over and act like it wanted to run (had to give a small amount of throttle) for about 2-3 seconds and then would die. Did this about 5 times and the typical dead or low batter clicking occured. Got the bike home and it has been on the tender for the last 2 days and i just put some time in on the bike and sure enough bike will turn over although kida sputtering and making slight backfire sounds (almost as if timing is off) and will run for about 2-3 seconds and dies. I can do this about 4-5 times and the infamous clicking starts to happen again. Now my bike has never been a cold start bike, i always have to give it a bit of throttle when its cold to keep it running, but once it warms up runs like a champ...or atleast it used to. Its a fairly new battery and has been kept on the tender when the bike is not used for a few days. Now the other thing that bothers me is it seems that oil may be seeping out from where the head and the case meet, but very little. The motor does have a slight coating of oil around the gasket area. I did send the motor to ATK back in late 04 or 05 and had the reliability and upgrade done to it but have only about 500 total miles on it since then, with about 400 of those in the last coulple of months. ,Even with a good bike battery 4-5 tries is about all they have.So forget about the battery and go with basics fuel,compression and spark. Also sounds like you need some mapping help, you should never have to touch the throttle when starting. The will run perfect if they are tuned. Do you know what map is in it? Did ATK also change the ECU to a .atj map?,,,

Nov 10, 2008 | 2003 ATK 260

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...