Question about Sym Motorcycles
An expert who has achieved level 3 by getting 1000 points
Hi, Howard/Stephen if your headlight is not working, only one beam works, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
low beam lights don work but high beams do
http://www.kymcoforum.com/index.php?topic=7572.0
Sym EuroMX 125 Service Manual
SYM Sanyang Scooter Parts Racing Planet USA
ScooterCommunity
Posted on Apr 04, 2017
Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!
Posted on Jan 02, 2017
SOURCE: vw golf mark 3 high beam lights
i would say you have a wiring fault, there's not much else in the circuit.... although it does sound like a switch fault, did you put a new or used switch in?? otherwise you may have to take it to an auto-electrician.....
Posted on Aug 26, 2008
SOURCE: euro low beam right side brighter than left side
You have a bad ground on the left low beam. Using a test light connected to ground see what wire is positive with low beams on. Using a piece of electrical wire connect one end to ground and with the headlight connector connected to the headlight and headlights on stick the other end into back of the connector at the ground wire. If the light gets brighter, you can cut the original ground wire to the connector ( 2-3 inches from headlight connector) and run a new wire from ground and connect it to the wire at the connector. Hope this is helpful.
Posted on Jun 21, 2009
Hi ,Check the light bulb,see if its seat in the seats properly 'for earth' and the light terminals for dirts ,grease,or corrosion.clean if needs to.I think its a Earth problems
Posted on Dec 17, 2012
Mar 09, 2017 | Sym Motorcycles
Apr 12, 2015 | Sym Motorcycles
Jan 26, 2015 | Sym Motorcycles
Feb 17, 2013 | 2007 Sym Jet Euro X 50
Oct 01, 2012 | 2005 Mazda 6
Aug 23, 2012 | 2007 Sym Jet Euro X 50
Aug 20, 2017 | 2007 Sym Jet Euro X 50
Aug 26, 2010 | Chevrolet Lumina Cars & Trucks
Mar 24, 2010 | 2004 Sym Husky 125
Jan 17, 2010 | 2005 Ford Focus
Jan 06, 2018 | Sym Motorcycles
Sep 19, 2013 | Sym Motorcycles
105 people viewed this question
Usually answered in minutes!
×