Question about 2005 Kymco Bet and Win
I have a gas powered kymco bet to win 250 battery is good but there's no power, what could it be? @
Posted by Anonymous on
Hi, Anonymous before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter motor or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. Faulty ignition relay.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Scooter Electrical Ignition Parts for KYMCO Bet Win eBay
Couple Of KYMCO Questions
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts... http://www.scooterunderground.com/knowledge/manuals/pdf/B&W%20250%20Owner's%20Manual.pdf
Posted on Oct 13, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: No power on my Kymco Zing 125
your best try is to contact your dealer, and get them to order you the short red wire that runs from the + terminal on the battery, to the starter soleniod ( also has a thin red wire that runs to fuse holder) i had exactly the same problem and this solved it. i have however re done all the electrical connections on my bike using 7amp wire and bullet connectors, as i have had many faults with the electrics before.
My bike is a Kymco Cruiser 125 (almost exactly the same bike, i use kymco zing parts when replacing) i paid approx £16 GBP for the wire.
Posted on Oct 05, 2009
if you email mad matts at email@example.com with the make of bike and year he will tell you what the right battery is you might have to give him the batteries dimensions
Posted on Oct 24, 2009
You need a new battery installed and have it at a full charge. If you needing to jump start it then the battery that is in it has gone bad. When you have the jumpers on all you are doing is giving it enough to turn it over a couple time that is why you need a new battery.
Posted on Nov 20, 2009
Posted on May 02, 2012
Testimonial: "Thank you Vlad My kymco is a scooter ego 250 ,i will see if they will do con-rod for motor bikes Cheers"
Tips for a great answer:
Jul 24, 2017 | 2005 Kymco Venox 250
Feb 23, 2016 | 2007 Kymco Bet and Win 150
Apr 24, 2015 | Kymco Motorcycles
Apr 18, 2013 | 2007 Kymco Bet and Win 150
Jul 13, 2017 | 2007 Kymco Bet and Win 150
Jul 29, 2010 | Kymco Venox 250 Motorcycles
Nov 20, 2009 | Kymco Grand Dink 250 Motorcycles
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: