Question about Honda Motorcycles

2 Answers

I have a Honda cl 175 from 1976 what are the carb settings ?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Hi there. The ''default'' settings are :
step #1 turn the mixture and idle screw all the way in clockwise
step #2 you turn counter clockwise the mixture screw for 1,5 rounds, and the idle screw when the motor can run freely without going off.
#3 Then you adjust the mixture screw if you do not like the outcome by micro movements clockwise. Hope i helped.
I have a Honda cl 175 from 1976 what are the carb  - 25624135-a3ebu35tqft43no01xcd4bn4-5-0.jpg

Posted on Apr 03, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Honda Master
  • 48,600 Answers

Hi Leroy, there are two setings, idle screw which if i rember corectly is bigger than the air fuel mixture screw. First start engine and warm it up to operating temperature and set idle screw to 1000 rpm then slowly turn air fuel mixture screw clockwise untill the rpms start to drop, it may also rise first then drop off, any ways when you reach that drop off point back the screw out untill max rpms is obtained then if necessary reset the idle screw back to 1000 rpm or what sounds and feels comfortable to you. Good luck
P.S. I had a 1978 CL305 had a stock tuned exhast the made such a sweet sound that's never been duplicated since, fond memories

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Apr 03, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CAN HONDA ACCORD 2.3L TRANSMISSION BOLT TO HONDA ACCORD 3.0L


Automatic Transmission Application Guide ' Performance ...

www.importperformancetrans.com/application_guide.shtml
Automatic Transmission Application Guide .... Buick, SKYLARK, 1995-1996, L42.3L/2.4L V6 3.1L, 4T60E ..... Honda, ACCORD, 1998-2002, V6 3.0L, B7XA.

Does a CL tranny fit Accord V6? - Honda-Tech

honda-tech.com/honda-accord.../does-cl-tranny-fit-accord-v6-2468991/
Jan 8, 2009 - I hope its just a bolt on thing like B and D tranny. Any help would be great. .... The 2.3l four banger from the accord or cl will fit the v6 j30 engine. Is that rite? ... Do not buy a '97 to '99 3.0CL transmission and expect it to work in yourAccord. It will bolt up to the .... Honda 1998-1999 Accord - (3.0L V6) - B7XA

Dec 08, 2015 | Honda Cars & Trucks

1 Answer

600 Shadow. How do I set the carbs?


Hi,if you are talking about balancing the carbs,the best wayis to go along to a honda service centre and buy a vacuum gadge wich gose onto the carbs to set them up propperly,it should come with instructions.
Hope this was some help,all the best.

May 23, 2015 | Honda Motorcycles

1 Answer

Release stuck float valve honda cbr 1988 carb


You may need to completely clean the carb with a carb cleaner. If bike was setting over winter and not started, the old gas breaks down leaving grime on internal carb parts. I understand the gas now-a-days with 10% ethinol breaks down after about 2 months.
A carb kit can be purchased with new parts that can
also help in most cases.

Feb 28, 2015 | Honda Motorcycles

1 Answer

1980 Honda CL 175 will not run without the choke on


Hi, Anonymous and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Carb rebuild and still won run without choke
1980 cb650 will not run without choke
http://waynes-cycles.com/MANUALS/125-CB175-CL125-CL175%20Shop%20Manual-1971.pdf
https://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 01, 2012 | Honda Motorcycles

1 Answer

I am after a Honda CL 400 Manual


Trouble is that the manual will be in Japanese, the engine is the same as the XR400R if that helps any?

Jul 10, 2011 | 2001 Honda CL 400

1 Answer

Honda cl400 has been sitting for 4to5 years. what would be the best thing to do before trying to start it. the fluids are still in it


for sure drain and replace the fuel,, oil change with filter,, and be ready to replace old brittle gaskets,, the carbs and needles will more than likely have to be cleaned if you have them,,

Apr 29, 2011 | 2001 Honda CL 400

1 Answer

How do you set the carbs on a 1971 Honda CL175? It runs but idles high and when you get it up to higher speeds it dogs. I am thinking that I jsut need to tune the carbs but not sure.


yes, you need to tune the carbs, by adjusting the low and high speed jets. there should be to slotted screws on the carbs, this is an older m/c, that is the set up. start bike and try tuning them. the carbs may need cleaning if you cant adjust

Aug 08, 2009 | 1971 Honda CB 100

1 Answer

How many quarts of oil do i put in 1999 acura cl 3.0


4.6 QUARTS PER SERVICE MANUAL. DONT FORGET TO USE OIL THAT IS SPECIFIC FOR HONDA. HONDAS AND ACURAS ARE CRAZY WITH HAVING TO HAVE HONDA OIL, HONDA COOLANT, (50/50 WATER, COOLANT) AND HONDA FILTERS AND HONDA BRAKE OIL AND POWER STEERING FLUID. I HAVE FOUND THAT USING HONDA FLUIDS CAN STOP A LOT OF PROBLEMS AND PREVENT DAMAGE.

Jul 10, 2009 | 1999 Acura CL

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4988 Answers

yadayada
yadayada

Level 3 Expert

80531 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...