Question about Motorcycles

1 Answer

When I push the start button the module got click but wont start

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Motorcycles Expert
  • 299 Answers

Clean the ground leads and the positive connecting from battery to solenoid to starter the solenoid is what is clicking after it is cleaned if it still does this the solenoid may be the fault. to hot start it turn key to on position then get a screw driver and jump it across the two battery wires on the solenoid this will engage the starter and start the bike good luck

Posted on Mar 31, 2015

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 14 reg kia pro ceed today it wont start its a push button start it sounds strange when push the button all lights on dash come on. Any ideas

Could be a control module issue, you probably need the arvices of a Kia technician. Not something that can properly be done here I think

Jun 02, 2015 | Kia Cars & Trucks

1 Answer

Dryer wont start just clicks what can be wrong

may be a bad thermal shut off , any error codes like F1 may also want to check ur push start button or dial with a multimeter, if its bad can get a buzzing and maybe a clicking

Sep 15, 2014 | Dryers

1 Answer

Why does me honda 230 crf only start by pushing it

Dirty contacts in starter button or loose wire.

Dec 30, 2012 | 2004 Honda CRF 230 F

1 Answer

My jimmy's 4wd acctuator seems to work and i can hear the module in the kick panel clicking but doesn't seem to want to go into 4wd every time.

two common things with the push button 4x4 the button panel itself or the encoder motor loose its marks usually the buttons will all flash if the panels bad and it wont go into four wheel high if the encoder motor goes bad but if these dont sound like your symptoms you might have a bad transfer case module hope this helps good luck

Aug 22, 2010 | GMC Jimmy Cars & Trucks

1 Answer

Dryer wont start.

Some start buttons do not click. But it sounds like maybe the door switch.

Sep 25, 2009 | Kenmore 659 Electric Dryer

2 Answers

Movano van

i have just bought a v reg vauxhall movano when i put the key in the ignition the immobiliser light goes out but the engine wont start any ideas

Feb 27, 2009 | 1999 Oldsmobile Intrigue

1 Answer

Kenmore heavy duty dryer model#86870800 wont start running

Hi ya, rkallen
Welcome to

You said, when we push the start button, it will lightly click like it is ready to go but wont actually start. Is it the starter button that is bad? How hard is that to change ourselves? Any suggestions?

Sounds like you have a bad starter switch inside or a bad relay.
Doing it your self you will not be able to determine if it is the starter switch or the relay. You need someone who knows how to use test equipment!

Web site and schematics below. You can open them into the whole window and buy parts there too!
Thank you Huuum
Please leave a solved rating before you sign out

Jan 23, 2009 | Kenmore 63942 Dryer

1 Answer

89 BMW 735 il wont start

The cause of the display reading E sometimes and S sometimes is a defective transmission module, or getriebesteuerung in German. This module is located in the passenger side kick panel. To replace the module you will have to remove that panel then loosen the 4 10mm bolt which hold the module in place. There is a large set or wires going to this module and it is not simple to remove at first, it takes some twisting and shouting. Make sure your battery is disconnected when you do this and make sure to replace it with a module that has the same part number on it, If you have any more questions I'd be glad to help.

Jan 09, 2009 | 2007 BMW 750Li Sedan

1 Answer

Tv wont turn on

your tv is in shutdown mode replacing the power suply module may corect this problem

Oct 16, 2008 | Philips Magnavox 51MP392H Rear Projection...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75822 Answers


Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides