Question about Zongshen Motorcycles

1 Answer

I have a zongshen 200cc quad that is not producing any spark, can you please help me identify the problem? It may have something to do with the wiring as when I got the bike someone has tampered with

I have a zongshen 200cc quad that is not producing any spark, can you please help me identify the problem? It may have something to do with the wiring as when I got the bike someone has tampered with all the wiring. I have so far been able to get it to tune over and this is where my dilemmas start. I have added this photo so you have som understanding of what I mean . A complete wiring diagram would be helpful if you have one handy. Regards Hudson

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Zongshen Master
  • 2,210 Answers

Go online for the nearest dealer and see what he's got. These are cheap imports with very little support so you could have trouble.

Posted on Mar 30, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pack484hawks
  • 13 Answers

SOURCE: hi i have a dinli

I assume that is a 100cc, 2 stroke ATV? If the starter motor is spinning, and you just don't have any spark. First, replace the spark plug. If that doesn't fix it, then you may have one of the following problems: Bad CDI, Kill Switch or Rip Cord Shut off switch, Frayed wire shorting out, cracked/damaged spark plug cap, bad coil or coil wire, bad stator. My bet is on the kill switch and/or Lanyard/Rip Cord shut off switch or the CDI. You can bypass your shutoff switches to see if they are the problem by either disconnecting the wires or connecting them together(depending on the type of system you have). CDI's routinely fail on small engines and generally cost about $20-$70, depending on the style. www.solanocycle.com

Posted on Jan 03, 2011

  • 112 Answers

SOURCE: wiring diagram for bike

You can go to your local dealer and they usally will copy it out of ther service manuel for you.When you say passing lights do you mean highway lights?

Posted on Mar 29, 2009

  • 3567 Answers

SOURCE: no spark on my bike haven't road for a year now help please

Check the kill switches including the side stand switch, with an Ohmmeter. Good battery? Good fuses" All wires clean and with a solid connection? Check the loom. Any abraded wires? Check the operation of the ignition switch with a volt ohmmeter. Is the bike in neutral and the neutral light is lit up? Get new stock spark plugs.

If still no spark, get CDI system and coils checked at the dealers shop.

Please rate this solution. Thanks burbee904!

Posted on Apr 05, 2009

  • 1 Answer

SOURCE: will not start

Have you checked the coil to make sure it is firing?

Posted on May 26, 2009

  • 10 Answers

SOURCE: I just bought an old 1986 suzuki 250 quad runner

Google for the information you need..

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Any help please 2007 Zongshen zs250-5 cruiser will only idle with choke on


Hi, Wazza and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on the blue links below. Good luck and have a wonderful day.
2007 Zongshen 250 5 fuel and vacuum line routing Google Search
http://www.miniriders.com/carby-and-tuning/32092-250-thumpstar-wont-idle-without-choke.html
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
http://absolutelyscooters.net/service-manuals.html
ZONGSHEN ZS250GY 3 EFI Maintenance Manual

Jun 18, 2017 | Zongshen Motorcycles

1 Answer

Zongshen 125 pitbike I got fuel , spark, and good compression , ive dipped carb 8 times and ran wires thru the ports and it still wont run without eather , please help


Hi Ben, you could have bad fuel, blocked or clogged float bowl vent line, fuel line, faulty petcock, or fuel tank or cap not venting properly. for more information about your question please visit the website below. Good luck and have a nice day.
http://www.skirmishday.com/catalog/z/zongshen-pit-bike-service-manual.pdf

Sep 27, 2015 | Zongshen Motorcycles

1 Answer

WAT is the horsepower on 200cc


It depends entirely on the engine's properties.

Your standard lawn mower engine of 200cc produces about 2.5 hp.

Some production high-performance cars produce one horsepower for every cubic inch of displacement, a 200cc engine is 12 cubic inches, so if your little 200cc motor is engineered as well as these cars, it could produce 12 horsepower.

The above pertains specifically to four stroke engines. If your 200cc motor is a two-stroke, you can easily double those numbers because a two-stroke hits every time the piston travels up.

You may also note that some 200cc motorcycles can produce as much as 50hp

Oct 08, 2014 | Motorcycles

1 Answer

It keeps flashing volts.


Your Charging system is not working. You may need to replace the alternator. The only reason it runs when you are hooked to a charger is your battery is not holding a charge and the alternator is not producing the electricity needed to fire the spark plugs. When you hook up to charger, you now have the voltage necessary to fire the spark plugs.

Apr 08, 2014 | RTO 200cc Full Size Four Wheeler ATV

1 Answer

Wiring diagram bashan 200cc s7 quad bike


check there is spark and spray quick start ito back of carb when trying to start

Jan 12, 2014 | ATVs

1 Answer

I have a yamaha blaster 200cc quad that is off road can i covert it to on road and what do i need to do


The regulations for the use of a Quad on the public highway vary from country to country. I would suggest that you ask your local vehicle licensing authority. Some Quads require a massive amount of extra kit to make them road legal. And sometimes it is not financially viable to change the usage, some quads are not capable of being made road legal..

Aug 05, 2013 | Motorcycles

1 Answer

My quad wont fire


The valve may be off a bit get the valve specs and check it usually the intake valve that causes that you will have compression but it it will stay open just enough that it won't start

Apr 17, 2010 | RTO 200cc Full Size Four Wheeler ATV

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zongshen Experts

Joseph Hoffmann

Level 3 Expert

1702 Answers

Gregg Mahin
Gregg Mahin

Level 3 Expert

40761 Answers

johnny bonacci
johnny bonacci

Level 2 Expert

191 Answers

Are you a Zongshen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...