REMOVE THE TOP YOLK AND LOOK UNDER THE BOTTOM THERE ARE 2 SNAP SCREWS OR SECURITY BOLTS, IF SNAP SCREWS A VERY THIN CHISSELL AND TAP IT ROUND TO LOSEN IT, IF SECURITY screw u need a tool for it
SOURCE: lost ignition key to motorcycle need key code
Just take you registration down to your dealer, and they will cut a key using the VIN to determine key code. Hope this helps.
JP
SOURCE: Suzuki 1982 GS1100GL won't accelerate
No wonder it has been sitting for so long it becomes lazy..... Sorry, just to cheer you up. Check you clutch pack, tming chain and tranny state before anything.
SOURCE: have a 1982 suzuki motorcycle gs1100gk starter
Actually no this happened because the bolt holding the magneto on was not properly tighten to the correct torque a loose rotor will shear the key remove the rotor and inspect the key way remove what left and install a new set key and properly torque the bolt.
SOURCE: i recently bought a 1982 suzuki gs1100 L
my manual says 0.09-0.13mm or 4-5 thou for inlet and exhaust.
I usually set the inlets at the lesser amount and ex at the greatest
SOURCE: I need a service manual for a 1982 gs1100 suzuki
good day Sir, please try this link hope i will help you
suzuki motorcycle
200 views
Usually answered in minutes!
×