How do i programme my new remote key on hyundai getz 1.6 cdx

Question edited for clarity, too many words :>D
Question moved to model category.

They are all in this link

https://www.hyundai-forums.com/threads/hyundai-getz-1-3-2005-g4ea-big-end-torque-settings.639857/

Hyundai Getz 2003 1 1 1 3 PDF

Scribd https://www.scribd.com > document > 138325436-HYU...
Tightening torque Main bearing cap bolt 1.3: 55 ~ 60 Nm (550 ~ 600 kg.om, 41 ... big end bear- ing. Crankshaft end play 1.3L: 0.05 ~ 0.175 mm (0.002 ~ 0.005 ...

..

All items controlled by the Body Control Module. You need to find a local auto electrician to connect a pro grade scan tool computer and look for communication issues.

https://www.google.com/search?q=auto+electrician+near+me

Here is the fuse box diagram, but nothing in there that looks suspect.

Hyundai Getz (2006-2010) fuses and relays

https://fuse-box.info > hyundai > hyundai-getz-2006-2...

Instrument panel - Here you will find fuse box diagrams of Hyundai Getz 2006, 2007, 2008, 2009 and 2010, get information about the location of the fuse ...

This vehicle is not on board programmable and requires a qualified professional to program smart key remote fobs.

1. Locate an automotive locksmith in your area using the phone number or website below.

2. If your vehicle is still mobile, it may save you money by driving to the locksmith instead of having them come to you.

3. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the smart key remote fob.

Cut you losses and but a new plastic end from china and refit your innerds into it ,dont forget the chip ?

possible recoding of key or key circuit board and micro switches damaged.

You will not have to buy a new ECU. Key fobs are programmable. Try inserting the key in the drivers door and lock/unlock to see if security resets. Also try disconnecting battery and reconnecting

1. Cars
2. Car Maintenance
3. General Car Maintenance
4. How to Program Keyless Entry Remotes in a Hyundai Sonata

How to Program Keyless Entry Remotes in a Hyundai Sonata By Christian Killian, eHow Contributor

• ? Pin
• ? 9
• ? Tweet
• ? Stumble
• ? Share

20Found This Helpful The keyless entry system in your Hyundai Sonata is part of the factory alarm system. If you have to replace a lost or damaged remote, reprogramming will be necessary. The remote is important because not only does it lock and unlock the doors, it also arms and disarms that factory alarm when you open or close your car doors. New remotes are available from any Hyundai dealer. While they will program it for you, you can do it yourself and save a programming fee.
How to Program Keyless Entry Remotes in a Hyundai Sonata(Kleophaus Livingston/Demand Media)

Other People Are Reading

• How to Reprogram Key Fobs Yourself
• How To Replace a Hyundai Sonata Remote

Step 1: Locate the fuse panel under the dash on the driver's side of the car. Just below it is the control module for the factory alarm system. Open the cover on the alarm system control module and locate the memory switch inside.
(Kleophaus Livingston/Demand Media) Step 2: Verify that the switch is in the "Off" position; if it is not, switch it to the "Off" position. This is important for the system to understand what you want it to do when you move to the programming mode.
(Kleophaus Livingston/Demand Media) Sponsored Links

• Download New VersionSnagit 12 Image & Video Capture. Edit & Share. Try Free Today!
  techsmith.com

Step 3: Insert the key into the ignition of your Sonata and turn the key to the "On" position. Wait for 60 seconds, then move the memory switch inside the control module to "Set."
(Kleophaus Livingston/Demand Media) Step 4: Depress and hold the "Lock" button on your remote for one full minute. This allows the remote and the control module to communicate and sync. Release the "Lock" button and turn the memory switch in the control module back to the "Off" position.
(Kleophaus Livingston/Demand Media) Step 5: Turn the ignition switch to the "Off" position and test the remote by pressing the "Lock" or "Unlock" button, verifying that the doors do lock or unlock.


Read more : http://www.ehow.com/how_6362326_program-entry-remotes-hyundai-sonata.html

Could be plug catalytic con.

best take the new fob and the car to a dealer service centre and have it done as it has to be done together.

dealer only to programme it,but they can be cut and programmed by a specialist in automotive keys but you will need the 4 figure code for your chassis number and a lot of dealers will not give you this information.Also you cannot remove the factory immobiliser as the ECU unit is extremely complicated and no wiring diagrams are published,Dont argue or go their as iam not happy with the way bill gates look alike nerds are putting me out of work.