Related Tags:
This problem should be removed because:
Problem with Yamaha 2001 TDR 125
When is cylinder honing required?<br />Replaced cylinder head on Yamaha TDR 125 (second hand part). When the bike is driven, power fails. New rings were fitted. Thanks, Dan
Solutions (1)
Best Solution
What is the compression on your scoot?
Honing is for small imperfections.If you can run your finger nail over Imperfection and it clicks or hangs up you need a BORE job..Honing is for very small issues. Seconhand parts also must be inspected and checked for wear.Mic the cylinder for proper specs. Please get back at me and Ill try to be of further service.
-
head bolts tourque settings yamaha dtr 125
Hi can you please tell me what the cylinder head holt touque setting are for a yamaha tdr 125 Thanks Dave
-
yamaha tdr 125 1997 not sparking constantly
when i spin my engine over on the electric start,it does not spark constantly,as i let my finger off the start button it gives 1 or 2 bright...
-
How can I fully derestrict a 2008 TDR 125. Bike
How can I fully derestrict a 2008 Yamaha 2/s TDR 125?. Bike was imported new from UK into Southern IRELAND Thanks Berry
-
does the cylinder need honed before new rings its
does the cylinder need honed before new rings its a2001 yz 125 im new to these plated cylinders
Add Your Solution
-
tdr 125
Hi ive jut bought a dodgy tdr the starter motor i gone make a clicking ound i could jump it but ince it ran out of fuel...
-
a list of all service oil i need. a list of all...
a list of all service oil i need. list of all oils
-
tdr 125
hi ive jut bought a dodgy tdr the starter motor i gone make a clicking ound i could jump it but ince it ran out of fuel...
Related Topics
Fix-O-Meter
103
103 people viewed this problem
- 1 person found this problem to be helpful.
- 0 people are following this problem. Be the first!
Top Yamaha Experts
Verification:
Please enter the characters below to complete your post
Can't read it? Try a different one
