How do i replace my clutch kit. i burned it out
ello mate,,first drain the oil out,remove the right side lower fairing,,then remove the wot looks like a large circular engine casing,then remove the bolts with springs holding the clutch plates in,,take off the cover then u will see the plates and metal lookin clutch plates,, now take out the clutch plates one at a time,,,ie take one out then place on the bench,take a metal plate out and place that on top of the 1st plate u took out,and so on,, when u have the new fibre plates,,replace back in the bike as u took the old ones out,,ie, new fibre plate 1st then put a metal friction plate back in from your bench,,then a new fibre plate and so on,,each time u replace the new plate ,chuck away the old one,,wen u have done that ,on the clutch plate cover look at the face of the cover u will see a small arrow head or a dot stamped on the face of it,, that dot should line up with a dot thats stamped on the housing where the clutch plates are,put the plate casing on so that the dots line up ,,put the springs and bolts back on and do them up tight,,then replace the engine casing,,,put your oil back in,,if u have a hydrolic clutch u will have to remove the 3 screws and the clutch piston b4 taking the casing off ,,,to read this it will sound complicated m8,, but wen u start the job itl be quite easy,, take your time tho,,any probs m8 ,shout and il anserw u,, ok,, cheers now
×