Question about Motorcycles
Posted by Anonymous on
You need fuel to each carb, that's pretty much all you have to worry about.
Posted on Jan 06, 2015
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
All engines need the same three to four things to work correctly..
Compression, Fuel, Spark, (timing).... But, usually those bikes, have fuel issues. The fuel tank spigot has a vacuum controlled valve which when the engine is cranked, suction is applied and fuel then can flow. Second,, the needle and float in the carb tend to get gummed up along with the main and idle jet... You need to make sure the carb is maticulously clean, Using carb cleaner, and tag wire,, or a piece of fine wire ( be careful not to enlarge the tiny holes). Keep refering to the 3-4 list fuel, compression, Spark,,,timing.....
Posted on Mar 12, 2009
SOURCE: Need to set floats on an xj 700
with the float bowl off and holding the carb level, adjust the float where it is level and the jet is up enough to seal. float should be set then.
Posted on May 07, 2009
Tips for a great answer:
Jun 14, 2014 | 1985 Yamaha XJ 700 X Maxim
Apr 10, 2014 | 1986 Yamaha XJ 700 X Maxim
Dec 22, 2011 | 1985 Yamaha XJ 700 X Maxim
Apr 02, 2011 | 1985 Yamaha XJ 700 X Maxim
Nov 07, 2010 | 1986 Yamaha XJ 700 X Maxim
Oct 25, 2010 | 1985 Yamaha XJ 700 X Maxim
Mar 31, 2010 | 1985 Yamaha XJ 700 S Maxim
Oct 12, 2009 | 1985 Yamaha XJ 700 X Maxim
Jul 04, 2009 | 1985 Yamaha XJ 700 X Maxim
Mar 05, 2009 | 1985 Yamaha XJ 700 X Maxim
May 23, 2018 | GAS Motorcycles
67 people viewed this question
Usually answered in minutes!