Question about Kymco Motorcycles
May be the internal part of the cable is broken and still stuck inside the speedo drive
Posted on Dec 25, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Instrument panel bulb removal
Push the rubber boot forward from behind and the bulb glass cover should pop out from the front of the instrument panel with a little prying with your finger tip. You don't have to push it far, just enough for the cover to pop out of the lip. Then you will be able to remove the bulb. I then use needle nose pliers to remove the bulb.
Posted on Nov 10, 2008
take out the front wheel remove the drive it should tap out with a bit of gentle tapping they are not that tight fitting
Posted on Feb 07, 2009
Normally, one goes to the carb, one to the gearbox and one to the battery. What sounds really weird is the diameter of the hoses. Three quarter and one inch diameter? Normally 1/4" to 3/8".
Hope this helps!
Please rate this solution. Thanks locjaw69!
Posted on Apr 04, 2009
Check for bad fuse holder spring contacts. Loss of power to speedo or sensor will cause this problem as V65 Sabre uses stepper motor for speedo.
Posted on Jun 04, 2009
Tips for a great answer:
Mar 12, 2018 | 2005 Kymco Bet and Win
Nov 10, 2017 | 2005 Kymco People 150
Oct 17, 2017 | 2005 Kymco Movie XL 150
Sep 13, 2017 | 2009 Kymco Venox 250
Aug 29, 2017 | 2005 Kymco People S 200
Jul 24, 2017 | 2005 Kymco Venox 250
Mar 26, 2017 | 2007 Kymco Xciting 250 i
Apr 03, 2015 | 2005 Kymco Bet and Win
Aug 06, 2011 | 2008 Kymco Super 9 LC
Oct 12, 2017 | 2003 Kymco Venox 250
75 people viewed this question
Usually answered in minutes!