Question about 2000 kawasaki VN 1500 Vulcan Classic

1 Answer

How do I remove my mustang seat from my 2000 kawasaki vulcan 1500 classic?

Trying to get the seat off so I can change the battery!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

On my Roadstar and my Triumph Thunderbird there is a bolt at the back of the pillion seat you remove, slid the pillion back and out then remove (2) allen head bolts from each side of the riders seat just under the edge of the seat. Slide the seat back and off. If you go to they have a parts breakdown of most bikes and it will show the locations of the bolts and brackets. Good luck!

Posted on Dec 08, 2014

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Mobility scooter seat should lift off I think but how? comfort coach 4. Trying to get to battery compartment for change battery.

I don't believe that the seat just lifts off. It is probably bolted on. Look for any possible such mounts for the seat to remove. After you get the seat and post off you can then remove the battery cover. Also, there are probably two batteries to be replaced. Most use two 12 V batteries to make 24 V run circuit.

Apr 19, 2017 | Coach Health & Beauty

1 Answer

Have a Invacare Pronto m51 Sure step. Trying to change batteries and the seat seems to be stuck

Turn chair on its side. get spray pb blaster on it. set chair upright and wiggle seat back and forth to loosen. It takes work but after it is apart use grease on mating parts so they do not stick together anymore.

Aug 01, 2016 | Invacare Health & Beauty

2 Answers

Need radator for kawasaki vn 1500 classic tourer 2001 is the driffter the same radator as the vn 1500 classic plz hellllllllllllp

TO ALL VN1500 OWNERS....This once happen to me,
I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds..
Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars,
When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.

Feb 06, 2012 | kawasaki VN 1500 Vulcan Classic Tourer Fi...

1 Answer

Need to change the battery, stuck at a store. Tools needed and location of battery would be awesome. trying to make battery change asap

Depending on what model bike you have, the battery will either be under the seat or under a side cover, usually the right side cover. Screws differ. Some require a phillips screwdriver others require a flat screwdriver and some require a 10mm or 8mm wrench.

Aug 15, 2011 | Yamaha V Star Classic Motorcycles

1 Answer

My vulcan 1500 classic will not start without jumping the battery. as soon as the jumper cables are removed the bike stalls and will not start.

Most modern bikes will not start unless the battery is charged. Battery is probably dead, and you rectifier is most likely dead too. change those out with ones known to work and see if that changes it.

Jul 30, 2011 | 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

How do i get to the battery on a 2003 buick lasbre. I'm trying to replace it

Battery in under the rear seat. Lift the front of the bottom part of the seat and you'll find the battery. Undo the mount, and untighten the battery terminals. Reverse order to install the new battery.

Sep 25, 2010 | 2003 Buick LeSabre

1 Answer

How to remove the seat on my 1990 cbr 1000f4

Remove side panels under the seat to reveal seat bolts

Ride Safe

Jul 17, 2010 | 1990 Honda CBR 1000 F

1 Answer

Need to remove the seat on my kawasaki voyager 1200 (2000)
this link will show you where the bolts are at so you can remove the seat. you will start at the back of the rear seat. after you remove the bolts from the rail ( # 130) you can side the seat up and back it will "pop" off. then your bolts from the rear of the rider seat left and back. now both seat are off.
Good luck
C.C. Motorsports

Mar 24, 2010 | 2000 kawasaki VN 1500 Vulcan Classic...

1 Answer

Crank fuse on 2005 vulcan classic

keep pressing the starter and find out were the click is comeing from,, then change the starter solenoid, it sounds like this is at fault

Mar 02, 2010 | 2004 kawasaki VN 1500 Vulcan Classic

Not finding what you are looking for?
2000 kawasaki VN 1500 Vulcan Classic Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75005 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides