Question about 2010 Kymco Downtown

1 Answer

Hi I have Kymco Downtown 200 i I have a spark problem (I have no spark), I replaced a new ECU and a new ignition coil and still do not have a spark. I checked all the fuses are correct, I checked the crank sensor and its resistance standards. I'd love to get Help What is the role of the tilt switch? Thank you very much

Posted by on

  • 1 more comment 
  • Itay ben lulu
    Itay ben lulu Dec 03, 2014

    The engine turns while I give starter but I have no spark KILL switch eliminates the starter

  • Michael Lloyd Dec 03, 2014

    Have you checked all the ground wires to make sure that the coil and ecu are grounding good. the tilt switch is to cut off the motor if the bike falls over .

  • joe goulet Oct 13, 2017

    if the Regulator is bad it can kill the stater-generater

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Check the kill switch on the handle bars I have had them short out and also check the wire from the kill switch to the plug in on the bike. if that is good it maybe the Ing switch has a short. Hope this helps

Posted on Dec 03, 2014

Testimonial: "The engine turns while I give starter but I have no spark KILL switch eliminates the starter"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2013 Kymco Downtown 200i loss of power


Hi, Adams and the usual suspects are:
1. Dirty or clogged air filter.
2. Faulty spark plug.
3. Bad Gas.
4. Improper oil level.
5. Improper chain adjustment and lubrication.
6. Low tire pressure.
7. Dirty or contaminated carburetor needs cleaning and tuning.
8. Clogged or faulty fuel pump or injectors.
9. Improper valve adjustment.
10. Slipping clutch.
11. Improper timing.
12. Low compression.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Help moped starts but has no take off power
scooter losing power under acceleration
KYMCO Downtown 200i Service Manual
http://kymco.com.mk/katalog_delovi/DOWNTOWN%20200i.pdf
KYMCO Downtown 200i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


May 11, 2018 | 2013 Kymco Downtown 200i

1 Answer

I have a 2010 kymco downtown 300i there a light on the dash says mett in and its lit up


Hi, Michael the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
KYMCO DOWNTOWN 300 WORKSHOP MANUAL Download Manuals Technical $15
Kymco DOWNTOWN 300 ABS Parts
KYMCO downtown 300i Owner Manual
Kymco Downtown 300i 2011
https://it.wikipedia.org/wiki/Kymco_Downtown

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 08, 2017 | 2010 Kymco Downtown

1 Answer

Kymco people march 2009 49cc no spark


Hi, Edwin and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Tilt sensor needs a reset.
11. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
No Spark
GY6 Electrical Troubleshooting Tutorial No Spark Eliminator
KYMCO PEOPLE 125 Service Manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
KYMCO PEOPLE 50 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Sep 06, 2017 | 2006 Kymco People S 50

1 Answer

Kymco downtown 300i oil light stay on and won't start


Hi, Michael and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day
Downtown 300i Won Turn Over
http://meiguohosting.com/How-to-fix-start-problem-for-your-2011-Kymco-Downtown-300i
KYMCO People GT 300i Service Manual
Downtown 300i Kymco Scooter Parts Racing Planet USA
KYMCO downtown 300i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 26, 2017 | 2013 Kymco Downtown 300i

1 Answer

White paint code for 2013 kymco downtown 300i motorscooter


Hi, Brian for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Anyone found touchup paint yet
Metallic Paint Kymco Motorcycles Scooters
KYMCO Downtown 200i Service Manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
http://www.kymcousa.com/owners/onroad/Downtown-300i-Owners-Manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jan 01, 2017 | Kymco Motorcycles

1 Answer

How to open seat with a dead battery on a 2013 Kymco Downtown 300i


Hi, Mickey for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
downtown seat latch
Kymco Downtown 300i battery removal and look at the engine
KYMCO People GT 300i Service Manual
Kymco DOWNTOWN 300 ABS Parts
KYMCO downtown 300i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jun 13, 2015 | 2013 Kymco Downtown 300i

2 Answers

No spark from coil


charge the battery fully it may not have enough charge to start, you could jump start it with a battery or a car but not a running car, they put out 16 volts and will fry the electrics,

Jul 28, 2014 | 2011 Kymco Downtown 300i

1 Answer

No spark from coil


check cableling and fuses

Jul 28, 2014 | 2011 Kymco Downtown 300i

1 Answer

Kymco Vitality 2t 50 won't turn over. When I try to start the Kymco scooter, it tries to start, but it doesn't fully ignite. I try to kick start the scooter also, but that also fails to start the...


Take your spark plug out of the cylinder, reconnect it to the ht lead and place it on to your frame if you see a spark then your coil is fine, try a new spark plug, if there is no spark get a new coil and plug.

Remember there is a 2t and a 4t version of the kymco vitality and the spark plugs are different.

May 17, 2011 | 2005 Kymco Vitality 2T 50

Not finding what you are looking for?
2010 Kymco Downtown Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts

yadayada
yadayada

Level 3 Expert

80407 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4988 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...