Question about Motorcycles

1 Answer

Why does my 50cc hesitate to hit throttle - Motorcycles

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

With out a year make and model im kinda fishing in the dark. There are many reasons for this. Starting with the simplest it may be caused by something overlooked in routine maintenance like improperly adjusted throttle cable, chain slack, or an obstruction in either one. The next would be to make sure the carburetor is meticulously cleaned. And build up or obstruction will cause this. Most motorcycles take a higher octane rating gas so make sure your useing atleast the recommended minimum rating. Check the spark plug. It should be a nice caramel color not white or black. Now im not sure what your riding so if its an electronic throttle most of the time this is completely normal. Also make sure the bike is up to operating temperature. If its not it will have a hesitation
I hope this helps

Posted on Dec 03, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 50cc scooter(chinese) hesitates at full throttle, almost like it wants to stall and then it kicks back in. Could this be a problem with the carburetor valve?


Hi, Randy and the usual suspects are:
1. Inlet system air leak.
2. Enrichener valve not seated or leaking.
3. Damaged or restricted fuel tank vent system.
4. Restricted fuel supply tract.
5. Dirty or damaged air cleaner element.
6. Plugged bowl vent or overflow.
7. Worn or damaged needle or needle jet.
8. Vacuum piston assembly malfunction.
9. Loose or plugged main jets or passages.
10. Improper float level.
11. Accelerator pumps inoperative.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Chinese Scooter Club View topic Hesitation On Acceleration
Why is the engine bogging under acceleration Suzuki FA50 Moped
scooter keep bogging down under throttle
1 HOW TO FIX Most common MOPED Carb problem
How to tune in scooter carburetor


Mar 24, 2017 | Motorcycles

1 Answer

My 50cc scooter hits 20mph then seems to be missing revs when I pull on the throttle it was working fine then it started to make a different noise and when going over bumps horn gets stuck on (idk if last...


hi,if its an older type of scooter.you can check the excaust.
they fill up whit dirt from oil.its normal when by full trottle the noise change.what you mean by horn get stuck???

Feb 04, 2013 | Motorcycles

1 Answer

50cc moped runs great until full throttle then boggs down-does not do it at 1/2 or 3/4 throttle


Check for good fuel flow to carburator. If so have a qualified technician look in the carb for debris blocking the main jet. this is very common when the vehicle sits for an extended period of time.

Dec 28, 2011 | RTO Gas Motor Scooter 50cc

1 Answer

50cc scooter lack of power from 0 to 10mph


Fuel mixture is too rich. The easiest way I adjust those is to have a friend stand in front of the scooter, holding the wheel and handlebars still while I lightly hit the throttle and at the same time, adjusting the fuel mixture screw on the carburetor slightly. applying the throttle harder while adjusting, you should feel the scooter gain or lose power.

Mar 01, 2010 | Beta Alp 4T 200 Motorcycles

1 Answer

2000 toyota corolla hesitates when you hit the gas.


i would check your fuel filter and air filter first if they are dirty then i would change them. and if it still does it then it might be one of the sensors on your throtttle body. like your tps sensor or the iac valve or it could be your mas sensor you can also clean these with some throttle body cleaner and mass air flow cleaner that you can pick up at any auto parts store

Aug 22, 2009 | 2000 Toyota Corolla

1 Answer

Belt on scooter keeps breakin


Most adults have excellent records of never breaking a belt. Here is the reason why many kids break their belts,--- If you hop a curve, you must let go of the throttle. DO NOT have the throttle on wide open (full open) and hop a curve. If you do when the rear wheel comes off the ground, the rear wheel spins faster. When the scooter lands and the rear wheel hits the ground, you stop the tire from spinning, it will snap the belt. If you do hop a curve, let go of the throttle. When you land give it a little throttle. As you pick up speed then give it full throttle.

May 14, 2009 | 2004 Petronas FP1

1 Answer

Ford Mustang missing upon hitting throttle


it could be either of the pcv valves, it could also be the o2 senser on the exaust

Apr 12, 2009 | 1986 Ford Mustang

Not finding what you are looking for?

Open Questions:

Motorcycles Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...