Question about Road Motorcycles

1 Answer

Hi I have a kin road 125 there's a Mobil phone looking light that flashing what is it please ,mark

Turned it off have not a glue.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Road Master
  • 3,506 Answers

You are going to need to better describe the light with colour also and if possible provide a picture or drawing of it as I am unsure what a Mobil phone looking light looks like.

Posted on Dec 11, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My kin two's backlight isn't work. The screen works but it is too dark to see anything unless I hold it under a light. Any clue on whats wrong or if I can fix it?


Just to honest, My kin is the worst phone I have ever had. It has pretty much no features ,and my back light also stopped working completely. droid here I come

Sep 04, 2011 | Microsoft KIN Two Cell Phone

1 Answer

Volume ring is turned up full,but still very low,can hardly hear it ,i have a kin 1, is there a solution for this ,or is this common


might need a buzzer/tones replacement.go to the nearest mobile service shop for assistance










hope it helps you... please rate me..thanks

Jun 03, 2011 | Microsoft KIN One Cell Phone

5 Answers

My Kin 2 screen won't show anything. It still gets messages and everything, it's just the screen won't show it.


mine is doing the same thing no one will seem to give us the solution but i will call verizon and if they tell me i will let you know...

May 23, 2011 | Microsoft KIN Two Cell Phone

1 Answer

How do I change the font size on my kin 2


Hi,

Welcome to Fixya. Unfortunately there is no option to change the font size with the KIN devices.

Thanks for using Fixya.

Apr 08, 2011 | Microsoft KIN Two Cell Phone

1 Answer

My kin one will not turn on, it randomly turned off and the battery was fully charged so i dont see why it turned off and now will not turn back on


iTS A SOFTWARE ISSUE. JUST RE FLASH OR FORMAT YOUR PHONE. OR SIMPLY TAKE YOUR PHONE TO THE NEAREST SERVICE CENTER. THE GUYS THEIR WILL UPDATE AND RE FLASH YOUR PHONE EASILY.

Apr 04, 2011 | Microsoft KIN One Cell Phone

1 Answer

I do not know how to upload contacts from my old kin onem phone to my new kin onem phone


Why are you still using a kin? try typing them in after looking at the screen of your old phone

Feb 28, 2011 | Microsoft KIN One Cell Phone

1 Answer

KMX 125 turn signals not working


Hi, Referst before testing any electrical component in the Light Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, especially "AGM" batteries, also before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced your OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
KMX 125 ELCTRICAL FAULT
diagnosing and repairing turn signal problems
Kawasaki KX250 Service Manual
OEM Parts for Kawasaki
Kawasaki kx125 1997 Owner Manual

May 06, 2017 | 2002 kawasaki KMX 125

2 Answers

I need to know what weight oil to use in my 03 kawasaki kx 125


Use 10w40 motor oil in the gear box. Don't use any synthetic oils, oil marked "EC", or oil with "special" additives. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell. If in a hot area like Texas or New Mexico go with 20w50.

2aefc43.gif

Use TWO STROKE ENGINE OIL in the pump. If not using an automatic oil pump, then mix the gas and oil 32 to 1. That equals 4 ounces of TWO STROKE ENGINE OIL to one gallon of gas. NEVER use motor oil in the gas. Only two stroke engine oil.

A “very helpful” rating for this answer? Thanks!

Jun 30, 2009 | 2003 kawasaki KX 125

2 Answers

I lost the instructions. I want to pair my Jabra bt125 with my motorola razr


Hi,


1. I have the Jabra 125. You can get the manual at www.jabra.com if you have a different one. 
2. Turn off your phone. Power off. The order of powering on devices is the key. 
3. Press and hold your Jabra power button until it's glowing blue (not flashing blue light--but constantly on) 
4. Then turn on your phone...and look for wireless devices in your phone menu. 
5. Make sure you have bluetooth turned on.
6. the phone will find the Jabra, and then will ask to pair with it. passcode is 0000. 
7. That's it. 

Again, the key is the order of turning on devices.

Thanks.

Jun 05, 2009 | Jabra BT125 Headset

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Road Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

RAYMONDO1953

Level 2 Expert

545 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Road Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...