Question about Motorcycles

1 Answer

My 2013 dyna super glide won't start I installed new levers and chrome housing. The running lights come on when I turn on the ignition switch. But no high beams, no horn, no hazards, And the brake light only works when I hit the rear breaks, but not the front. I can hear the fuel pump when I turn the ignition but ONLY if the switch is already in the run position, if I turn the ignition and then hit the switch to run I get nothing. Oh and non of the functions on the tachometer are working either. All I did was change the levers and housing. WTH did I do to my baby????

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

You missed an electrical connection or severed an electrical connection. Go back and investigate where you touched the bike and you might find that dangling electrical ground or connection. Good luck!

Posted on Nov 22, 2014

  • Derrick DOOSE Nov 22, 2014

    Thanks Alex.
    Disassembling and retracing my steps now. No luck yet though

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition switch on press starter button grinding noise


Hi, Tony had to clean up your wacky tabacky ramblings couldn't make heads or tales of what you were trying to say anyways the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand or clutch pull in switch/sensor.
10. Security alarm needs a reset.
11. Starter control circuit, relay, or solenoid faulty.
12. Main fuse or circuit breaker may be blown or faulty.
13. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
HELP Super Glide won start Harley Davidson Forums
Harley Davidson DYNA Models Workshop Service Repair Manual 2001 $9 cheap
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://www.harley-davidson.com/content/h-d/en_US/home/owners/maintain-your-bike/owners-manual.html
Instant Tech Relief To speak with me personally absolutely "FREE"

Mar 12, 2017 | 2001 Harley Davidson FXD Dyna Super Glide

1 Answer

New battery but it won't start turn the key and the lights come on but it won't start


Is the run/stop switch in the "run" position? If the bike has security, check the battery in your fob.

Mar 15, 2015 | 2009 Harley Davidson FXD Dyna Super Glide

1 Answer

Horn doesn't blow wont crank when ignition turned on a 2003 dyna superglide


Harley horns fail. Replace the horn. If this fault has happened at the same time as engine wont crank then problem with wiring. If not then check starter relay (grey one). Also check ignition switch. Are the head lights coming on when turned on? If so the ignition switch is o/k. Connect a voltmeter to horn to check horn circuit. Accessory fuse 15 Amp supplies horn circuit and brake light and turn signal circuits so if these are working fuse o/k. Ignition/start circuit requires system relay and ECM fuse to be o/k. If fuel pump operates when run switch is activated then system relay o/k. Check start relay and circuit to start button.

Sep 15, 2013 | 2008 Harley Davidson FXD Dyna Super Glide

1 Answer

2007 ultra glide will not start, has new battery


Hi Anonymous, and the usual suspects are:
1.Ignition/Light Key Switch not in IGNITION position.
2.Engine Stop switch in the OFF position.
3.Discharged battery, loose or corroded connections check negative cable at both ends. (solenoid chatters).
4. Bank Angle Sensor tripped and Ignition/Light Key Switch not cycled to Off and then back to
5. Starter control circuit, relay or solenoid faulty.
6. Electric starter shaft pinion gear not engaging or over-running clutch slipping.
7. Security alarm not disarming
For a prime suspect please visit website below and good Luck.
Big Twin Carb EFI DTC Intructions codes Harley Davidson Forums Harley...

Apr 07, 2013 | 2003 Harley Davidson FXD Dyna Super Glide

1 Answer

HD Dyna 2010 Superglide won't start


Hi Clements_car, and the usual suspects are:
1.Ignition/Light Key Switch not in IGNITION position.
2.Engine Stop switch in the OFF position.
3.Discharged battery, loose or corroded connections check negative cable at both ends. (solenoid chatters).
4. Bank Angle Sensor tripped and Ignition/Light Key Switch not cycled to Off and then back to on.
5. Starter control circuit, relay or solenoid faulty.
6. Electric starter shaft pinion gear not engaging or over-running clutch slipping.
7. Security alarm not disarming
For a prime suspect please visit website below and good Luck.
Harley Diagnostic Codes 04 to Present
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Mar 25, 2013 | 2010 Harley Davidson FXDC Dyna Super Glide...

1 Answer

No ignition when I turn the key


Hi Anonymous, and the usual suspects are:
1.Ignition/Light Key Switch not in IGNITION position.
2.Engine Stop switch in the OFF position.
3.Discharged battery, loose or corroded connections check negative cable at both ends. (solenoid chatters).
4. Bank Angle Sensor tripped and Ignition/Light Key Switch not cycled to Off and then back to on.
5. Starter control circuit, relay or solenoid faulty.
6. Electric starter shaft pinion gear not engaging or over-running clutch slipping.
7. Security alarm not disarming
For a prime suspect please visit website below and good Luck.
Big Twin Carb EFI DTC Intructions codes Harley Davidson Forums Harley...
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Sep 26, 2012 | 2003 Harley Davidson FXDX Dyna Super Glide...

1 Answer

No brake lights or turn signals on 2007 harley super dyna glide


Hi Anonymous, always check fuses and bulbs first, you could have a faulty turn signal module or a bad turn signal button/switch, remove it from the switch housing and check for continuity, check your wiring and connections from the turn signal switch to the turn signal module with a testlite. Make sure all wires are not worn or pinched and connector pins are not corroded, broken, or loose. For a free wiring diagram please visit the website below: Harley Davidson Wiring Diagrams and Schematics

Sep 17, 2012 | 2007 Harley Davidson FXDC Dyna Super Glide...

1 Answer

Have a 2006 dyna wide glide foot brake light brake light hand brake does not replaced lever wherte is the brake switch


The front brake switch is located inside the right handlebar control. It is a plunger type switch. The correct way to install a new one is to solder the wires on the new switch to existing wires from the old switch. Cut the wires about 2 inches or so from the old switch. Be careful when reinstalling the front lever or you may damage the plunger on the new switch.

Jun 16, 2012 | 2006 Harley Davidson FXDWGI Dyna Wide...

1 Answer

2002 fxd dyna super glide will not start battery is fully charged


Check the battery. Load test it. It sounds at first blush without more testing that your battery is dead/shot. However a bad ground or other bad cable, end, connection either loose or defective or corroded tec could be the problem also.

Jan 08, 2012 | 2002 Harley Davidson FXD Dyna Super Glide

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...