Question about Bajaj Avenger Motorcycles
Give me examples of Harley davidson bikes
It's a cool idea but in case of Avenger you only can modify the seat ...without major modifications. Obviously you can install spot lights...Wider handle bar small luggage box is also cool.
Posted on Nov 23, 2014
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Faulty Indicator
hi again now that we know that the other three work we can carry on,
fist check remove bulb from faulty indicator and check bulb by swapping with one that does work
2/ check that you have a supply to your centr contact on the bulb holder, if not trace yor feed cable backwards you may find a break or a diconnected connector,if you have a supply to your bulb holder then the problem must be in your earth,this can be checked by fitting your bulb .select the faulty indicator nd with a piece of wire bared at both ends touch one end to bulb holder,the other to enging ore known good earth ,and you should ba flashing,if so ,then your problem will be solved by simply working out where the bulb holder has lost its route to earth
hope this is of assistance any further dont hesitate
Posted on Dec 31, 2008
yes you should start it at least once weekly to maintain battery and keep engine lubricated, also it keeps fuel flowing through the bike. but dont just start up then switch off, make sure you get it up to normal operating temprature, this keeps moisture out of the engine oil.
Posted on Jan 28, 2009
Depending on the bike.. On all the "easiest" thing to do is drop the front wheel, remove the 4 bolts holding the fender on. Watch out for the sheet metal tabs that lock the bolts in place. Now depending on the model you may have a light on the front of your fender, you will have the joy of disconnecting it first. Hope this helps.
Posted on Sep 18, 2009
change repair shop for one. the knocking might come from bad gas, fuel up with supreme at reputable gas station. your dynamo/alternator/voltage regulator is probably not working properly either. check voltage
Posted on Jul 04, 2010
If you want to change the module, it simply unplugs and another plugs in. The sensor plate is located in the timer cover. Drill out the rivets and mark the plate and the inside of the timer cover. Remove the plate and install the new plate getting it as close to the same position as the original as possible.
Posted on Jul 22, 2010
Tips for a great answer:
Sep 10, 2017 | 2005 Bajaj Bajaj Avenger
Feb 05, 2014 | Bajaj Avenger Motorcycles
Oct 20, 2013 | 2007 Bajaj Bajaj Avenger
Sep 18, 2011 | 2007 Bajaj Bajaj Avenger
Feb 27, 2011 | 2007 Bajaj Bajaj Avenger
Jan 17, 2011 | 2006 Bajaj Bajaj Avenger
Jan 16, 2011 | 2005 Bajaj Bajaj Avenger
Oct 27, 2009 | 2005 Bajaj Pulsar 180
Oct 12, 2009 | 2007 Bajaj Bajaj Avenger
Jul 09, 2009 | Sony E-reader Portable E-book MP3 Player
230 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: