Question about Motorcycles

1 Answer

How do i bleed air out of the coolint on a 2012 yamaha 300

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Motorcycles Expert
  • 214 Answers

Fill the rad and when nearly full squeeze the 2 main hoses a few times. Leave the rad cap off and start the engine and blip the throttle a few times then increase the revs slowly a few times do not over rev. Watch for bubbles of air escaping from the rad when this stops top up the rad to the required level replace the cap and make sure the expansion tank is at the full level. The system will expel any air left over time.

Posted on Nov 26, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bleed rear brakes 2013 yamaha grizzy 300


Bleeding any hydraulic brake system is the same...build pressure and release with the brake caliper fitting ..fill the reservoir... repeat..

Jan 05, 2017 | Yamaha 2012 Grizzly 300 Automatic

1 Answer

I cant get my rear brakes to bleed on my 2013 Yamaha grizzly 300


brakes can be a pita sometimes. google 'reverse bleeding'

Jan 05, 2017 | ATVs

1 Answer

Were is the air bleed screw on yamaha xjr 1200


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How to bleed hydraulic clutch on motorcycle in an extreme case of air...
How to bleed motorcycle brakes
http://www.journey.cz/moto/navody/Yamaha%20Manual_XJR_1300_UK.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xj-owners-manuals

Jun 24, 2014 | 1995 Yamaha XJR 1200

1 Answer

Bleeding brakes with dual discs


There has to be a bleed nipple on both calipers - its impossible to bleed a two calipers on separate sides of the bike with two brake lines with one bleed nipple - go back and have another better look.

May 15, 2014 | 2012 Yamaha FJR 1300A

1 Answer

I have a 2012 yamaha 300 grizzly and it will noy charge, I have replaced the battery with a new one and it just drains the battery and it will quit after running for about a hour.Is there a way to check...


Yes, Get a GOOD multimeter. Set it to any DC voltage over 12 volts. (2 people makes this a lot easier!) Crank the engine and put the leads red-red (positive to positive) and then black-black.(negative to negative) on the battery. There should be around 12.4v - 12.5v on idle, when you rev the engine to about 4K rpm+ you should see around 13.5 volts. If not seeing more that 12.8v over 4k rpm you need to find a factory service manual to troubleshoot the problem. Until you see 13.5 or a little higher you will never have it "fixed".

Jan 16, 2014 | Yamaha 2012 Grizzly 300 Automatic

1 Answer

1985 300 sl mercedez ran out of fuel how do i


Its not very difficult to bleed air from system.For step by step procedure click the link below and follow the details:-
http://autopartsdiagrams.blogspot.com/2013/09/bleeding-diesel-injectors.html
-------
This will help.
thanks.

Sep 22, 2013 | Cars & Trucks

1 Answer

No pressure in front brake on yamaha xvs 400?


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
need help bleeding front brakes no pressure at all
How To DIY Do It Yourself Motorcycle Brake Bleeding VSTAR 650
Yamaha XS360 Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xv-owners-manuals

Sep 13, 2012 | Yamaha XVS 250 Dragstar Motorcycles

1 Answer

Bike is getting hot


Hi, Damien and the usual suspects are:
1. Low coolant level.
2. Restricted radiator air flow.
3. Faulty thermostat.
4. Coolant pump or fans inoperative.
5. Vent hose crimped.
6. Air in the coolant and needs bleeding.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Dirt Rider Magazine
http://motocrosshideout.com/2012/05/30/why-does-my-4-stroke-motocross-bike-get-so-hot
YAMAHA YZ250F Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

May 20, 2012 | Yamaha YZ 250 F Motorcycles

1 Answer

2004 Yamaha XJR 1300 how to bleed the clutch


Hi, Dbh1696 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bleeding the clutch on xjr Engine Carbs
How to bleed hydraulic clutch on motorcycle in an extreme case of air...
Yamaha XJR1300 99 Service Manual
OEM parts for Yamaha
Yamaha XJR1300 Owner Manual

Dec 21, 2010 | 2004 Yamaha XJR 1300

1 Answer

OVERHEATING


Normally it is the head gasket not the manifold gasket that causes overheating, it does it by cracking and allowing water from the coolant system to be blown out of the exhust or get dumped into the sump.

When you start the car is there water coming out of the muffler

If not then dip the oil , is it like a thick chocolate milk shake

Final check is to take the cap off the radiator or header tank and see if there are lots of air bubbles coming up.

Any of the above means a shot head gasket

Jul 30, 2009 | 1999 Pontiac Grand Am GT

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...