Question about KTM Motorcycles

1 Answer

Does any one know how to fit a cd5004 ignition on a ktm620 egs? The new part is in 2 pieces so im not sure how to make it fit where the old one went. Cheers Marc

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    A rookie expert who has answered 20 questions on their first day.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Contributor
  • 34 Answers

It makes sense for one part to be the pick up sensor and the other a ignition advance module

Posted on Nov 08, 2014

  • marc wainwright Nov 09, 2014

    Thanks Pete, but what im saying is the replacement part will not fit in the space where the old cd ignition went as its larger and in two pieces.
    Cheers Marc



2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 142 Answers

SOURCE: how to replace ignition key on 1989 chrysler new yorker



Posted on Sep 11, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Trying to replace old ignition cylinder with a new one but the old one doesnt have a key

The casing for the lock cylinder is not solid and it has to be 2 pieces in order to fit around the steering column. But the reason you can't see that it has two pieces is because they are held together by bolts that are designed to have their heads shear off after they are tight. You have to drill out the shear bolts or back them out with a hammer and chisel to turn them CCW.

Jan 15, 2016 | 1991 Pontiac Grand Am

1 Answer


The manual says:

Yellow = constant 12v+, Red = ignition 12v+, Blue = Antenna (.1amp max) and Black = Ground 12V-

If this was helpful, please rate it 4 thumbs up. Thanks and good luck!

Sep 20, 2011 | Sony MEX-BT2500 CD Player

1 Answer

I replaced ignition swith now switch and wheel locked , do i need to reprogram

take the chip out of the old key and fit it into the new key and should start ,if ignition lock not releasing the steering wheel then you have done something wrong in the fitting and left a piece out possibly

Feb 15, 2011 | 1997 Volkswagen Jetta

1 Answer


The tail shaft is probably a different length than your original trans so you will need to get another driveshaft. Most likely a one piece from a full size wagon or sedan will fit. Remove the carrier for the two piece shaft or it will hit when you go over a bump or load the truck up and bend the new shaft. Other than that it should be a bolt in job.
Before you take things apartm measure the total length of both transmissions. If they are different length's ( more than an inch) then go under the truck and measure from yoke to yoke in a straight line to get a length for a one piece shaft. Also measure the length of the back shaft of the 2 piece. Then go to the scrap yard and find a replacement shaft to fit the one piece dimension or the length of your old shaft plus the difference in length of the 2 transmissions (within an inch). This will save you a lot of headaches once you get the new trans in and are trying to figure out what you are going to do now, when the driveshaft doesn't fit. Hope this helps.

May 29, 2010 | 1991 GMC C1500

1 Answer

Help me reinstall ignition on 2007 gmc sierra hd sle!

Get a manual from an auto parts store specific for your vehicle. In it, you'll find exploded parts diagrams and step by step instructions on how to replace those parts

Apr 15, 2017 | 2007 GMC Sierra 2500HD

1 Answer

Replacing key ignition to a 1990 dodge spirit

if im not mistaken your colum behind your wheel comes apart in 2 peices...after thast you will see 2 or 3 screws around the ignition switch go from there

Mar 04, 2010 | 1990 Dodge Spirit

1 Answer

Trophy new tank

did you have 2 fittings on old tank? if so then you need 2 fittings on this one, each carb needs to get enough fuel, if you use a t piece you will be making them struggle to get it. you can try and see, but as far as i know they should be separate feeds

Apr 10, 2009 | 1996 Triumph Trophy 1200

1 Answer

Trying to find out how to remove old steering lock on a 2008 Suzuki c90 Boulevard and install new one. Lost keys to old.

im not sure about that as i think you need a key actualy in it to remove it, was is same key as your ignition? if you have old ignition take that to locksmith and see if he can cut you a key to fit. the locksmith would probably drill it out for you . to be honest those type of steering locks are not much good anyway, i had my kdx 250 stolen and they just snapped the steering lock with a sharp twist of the bars.. better off with a DISC lock.
good luck

Mar 31, 2009 | 2005 Suzuki Boulevard C90T

1 Answer

I can't seeem to find out how to put the new lamp back into the t.v

if this is either of the 51" or 56" DLP tv's, it is very simple.
-Make sure tv is UNPLUGGED!
-Open the side compartment on left side of tv as you are facing it from the front.
-Take off the door and you will see the lamp housing.There are 2 screws facing you.Unscrew these and set the screws aside.
-Now pull on the housing a little and it should slide out.You may need to wiggle it a little.
-Set housing down on table or somewhere with good light.Make sure not to touch bulb of either the old lamp or new as oils from fingers can distort picture.
-Now,undo screws on shiny metal piece.There are 2.Take off metal housing piece.
-You now see the back of the bulb.If you look at the lamp from the front,you will notice where the 2 wires are fitted into a bracket with 2 screws.
-Unscrew those screws to loosen the bracket.The replacement lamp should have the exact same bracket.If not you can just undo the wires to the old lamp and connect the same wire harness to the new one.
-once the wire bracket is unscrewed, pull it out of its fitting and then unscrew the 4 screws holding the lamp in.
-Take notice of how the shiny metal clamp-fitting is situated to hold the lamp in place so you can put it back on the right way.
-Once loosened, the bulb should be able to come out and you can put the new one right in it's place. Make sure to keep the top wire connector on the bulb at about 11 o'clock and that a nub on the bulb fits through a spacer on the shiny metal clamp-fitting.
-Now tighten the 4 screws on the clamp-fitting and make sure the wire screw connectors on bulb are tight as well.
-Take the now loose rubber-covered wires and tighten them into the bracket-fitting the way the old ones were,with plugs and lamp facing the same way.
-With everything now tight,put metal housing back on and tighten the 2 screws down.
-Take the whole unit and slowly slide it back into the tv making sure that the plugs slide into their rightful place.This should be easy,but may require a wiggle or two.
-Now screw in the 2 screws you have left into the plastice mounting piece. Re-attach the door and plug the tv in.Wait a few minutes and then turn on tv.
-It should work.If not, unplug tv and check all connections.
TIP:Do not put a cold bulb in and then turn on immediately.I like to let the bulb sit in the tv with it plugged in for a while until the bulb is warmed and ready.
Good Luck! -Chris

Mar 10, 2009 | Vivitek V37835 46 in. LCD Television

2 Answers

The main eye piece is missing the lens.

yes you can..most brands of telescopes will fit others as far as eyepieces if you call bushnell@18004233537 im sure they can help...good luck.......

Oct 31, 2008 | Tasco Astronomical 302675 Telescope

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts


Level 3 Expert

76164 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Brian Anderson

Level 3 Expert

365 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides