Question about 2008 Gas Gas EC 200

Open Question

How do I start my scooter without the keys and no ignition?

My keys were stolen to my YY50QT-6-(4-stroke) scooter on June 30, 2009 because I left them in the ignition. Why was the scooter not stolen is beyond me. Is there a way I can kickstart my scooter since it has ignition or key now?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2013 Jonway YY50QT-6 vacuum line routing


Hi, Theresa loved your novella very quaint, the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day
2013 Jonway YY50QT 6 vacuum line routing Google Search
Fuel and Vac Line Tutorial
How to simplify vacuum hoses on scooter
Jonway YY50QT 21 FUEL LINE
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
http://absolutelyscooters.net/manuals/Jonway%20YY50QT-6.pdf
http://absolutelyscooterparts.net/pdf/CGEN_dawg_scooter_manual.pdf


Jan 10, 2018 | Jonway Motorcycles

1 Answer

How do I find parts for my 2013 Jonway scooter@


Hi, Don for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Jonway Scooter Parts
Jonway 49cc Scooter Parts
Jonway Scooters Parts
YY50QT 6 4T Jonway Scooter Parts Racing Planet USA
AKA Roketa Scooter MC 07 50 Baja SC50 Strada RX 50 Jalon JL50QT 21 falcon...

Nov 12, 2017 | Jonway Motorcycles

1 Answer

HEY DO INEED A BATTERY TO START MY CHINESE SCOOTER OR CAN I JUST KICK START IT TO MAKE IT RUN WITHOUT IT


Hi, Montana you can with stator modifications but not recommended for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
YY50QT 6 wiil it run with dead battery
Scooter Questions Get Answers to Your Scooter Starting Question
ServiceManuals

Jan 09, 2017 | Motorcycles

1 Answer

BUT DO I EVEN NEED A BATTERY AT ALL CAN I JUST KICKSTART IT


Hi, Montana for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
ServiceManuals
Scooter Questions Get Answers to Your Scooter Starting Question
YY50QT 6 wiil it run with dead battery

Jan 09, 2017 | Motorcycles

3 Answers

I lost my key to my sunl scooter think it's a 50cc


If you can't get one from a dealer, you will have to buy a new ignition lock.

Apr 28, 2016 | Motorcycles

1 Answer

Jonway Magnum 50 2T will not start


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch, kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
cranks but wont start
Scooter Troubleshooting Scooter won start All about Scooters
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
YY50QT 6 4T Jonway Scooter Parts Racing Planet USA
http://absolutelyscooterparts.net/pdf/CGEN_dawg_scooter_manual.pdf

Mar 20, 2015 | Jonway Motorcycles

1 Answer

The security alarm on my scooter sounds as soon as I turn the key. How do I reset it?


Hi davohoh.

Sorry for not replying sooner.
Not sure how much help I can be other than relating my own experience of this.

I've "stored" my own Piaggio MP3 250 (1997 model) a few times for "extended periods" and never really had a problem ....
(except once when it didn't want to unlock the tilt mechanism and just beeped at me when I tried - after trying many many times it just did it and never failed again)

.... until the last time in July 2014 when I had your ALARM problem.

It had been parked on June 15th when I went on holiday and left for 25 days - I returned on July 10th.

When I turned the key and the ignition lights all came on so did the alarm, sounding loud and constantly.
Turned it off and back on - still the alarm.
Repeated several times - still the alarm.
Seem to remember trying to unlock the tilt mechanism - can't remember if it did or not but the alarm kept sounding.

Tried starting it and I think it took a while turning over (definitely not an immediate fire-up - but this was probably down to it standing for almost 4 weeks) before bursting into life but it did start.

I thought this was quite surprising given the alarm was still going off and IF it thought it was being stolen, or was an immobiliser issue, that this would be possible.

I then definitely unlocked the tilt mechanism and rode it a very short distance (20 feet) - the alarm was still sounding.

Stopped, turned off the ignition and back on again.
Think the alarm went off again and I started it again.

Not absolutely sure but either the alarm just stopped sounding as the bike was ticking over, or it did after I turned it off/on and started it another once or twice.

Once it was "silent" it never went off again.
Stopped, started, drove, parked, left overnight, left 3 or 4 days, never had the same problem again in the 8 weeks since.

Strangely enough another fault got "fixed" whilst it was parked for these 25 days.

The remote control key unlocking of the seat catch had stopped working and hadn't worked for several weeks at least (possibly months) despite attempts to fix it (reprogramming?) as per a few suggestions I'd found on the Internet.

Sadly despite working for about 7 weeks since July 10th this failed a few days ago and I can no longer open the seat using the key.
The little green LED flashes on the key but there is just no click from the actuating solenoid. I need to look into this further - even change the battery in the key - just a thought !

Hope this helps

Aug 03, 2014 | 2011 Gilera Fuoco 500ie

2 Answers

Have 2000 saturn sl1 replace cyl and keys in


try putting the shifter in N and move the pressure off the wheel.

Jun 05, 2009 | 2002 Saturn Sl

Not finding what you are looking for?
2008 Gas Gas EC 200 Logo

Related Topics:

883 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gas Gas Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4904 Answers

Gene Tuck

Level 2 Expert

248 Answers

Kim Halliwell

Level 2 Expert

35 Answers

Are you a Gas Gas Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...