Question about 2001 Honda VFR 800
The rear wheel hub is eccentrically mounted and held in position by a pinch bolt. Simply slacken off the pinch bolt rotate the hub using the C spanner supplied in the tool kit, retighten, check tension in accordance with the sticker on the chain guard and you are in business.
Posted on Sep 11, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 13, 2016 | Cars & Trucks
on Feb 11, 2015 | Startrac Fitness Products Star Trac 4410HR...
Jan 30, 2016 | Stihl 029 039 Ms 290 310 390 Chain...
Nov 03, 2015 | Garden
Jan 06, 2015 | 2003 Honda Accord
Jul 21, 2014 | Poulan Pro Chain Saw 46cc 20"
These are the instructions for adjusting the chain. They are taken directly from the manual available at http://ep.yimg.com/ty/cdn/razorama/e100e200e300manual.pdf
To adjust the chain:
1. Loosen the axle
2. Loosen the brake anchor (this is attached with the small bolt in the long slot on the left side of the rear fork)
3. Tighten the tension adjusters on the axle 1/8 to 1/4 turn to tension the chain. Tighten both adjusters the exact same amount to maintain the wheel alignment.
Note: this system of adjusters is common to motorcycles and BMX
bicycles so I your are not familiar with it, if you know anyone who is,
they would not have a problem adjusting it for you.
Chain tension: The chain should be "just not-quite snug" in other
words, not taut or sloppy loose. BE CAREFUL NOT TO ADJUST TOO TIGHT. The tensioning system can easily impart too much tension and snap the chain or bend the motor output shaft. Turn the adjusters 1/8 to 1/4 turn at a time and recheck the tension each time.
4. Once the tension is good, tighten the axle and brake anchor bolt. Test run the scooter. Readjust as needed.
Jan 02, 2014 | Razor E100 Electric Scooter
Oct 01, 2010 | 1985 Honda XR 250 R
Jul 01, 2009 | Remington 16" Electric Chain Saw
Jun 13, 2009 | 1986 Yamaha FZ 600
239 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: