Question about 2001 kawasaki EL 250 Eliminator V

1 Answer

Kawasaki EL250 carburettor

Fuel drains from carb overflow pipe when fuel tap is switched on.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Turn off the gas and remove the float bowl. Remove the fuel line. Remove the float pin and float with needle valve. Do not bend the tang that the float needle sits on. Spray carb cleaner into the seat where the needle valve came from to clear out any trash in the valve casing. Spray the float bowl and interior of the carb. Remount the needle and float back in place and put the float bowl back on. Install an in-line fuel filter. The diagram below shows a 1994 carb Yours will be the same or close to it.

A “very helpful” rating on this answer? Thanks!

Kawasaki EL250 carburettor - 6d12579.gif

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel tank Tap -could you please advise which is the fuel system pipe leading to the carburettor and which is the vacuum pipe?


Depends on the bike to be absolutely certain, but best guess would be the lower pipe runs to the carb. Aided by gravity?????

Jan 25, 2016 | Tank Motorcycles

1 Answer

I have fuel shooting out of the carburettor overflow pipes, I have taken off the carbs there is no dirt or obvious problem


Your float is sticking just had the same prob.I purchased a carb rebuild kit and it solved my prob.

Aug 26, 2015 | 1999 Yamaha FZS 600 Fazer

2 Answers

Fuel leaking out of carburettor thru air intake valve


try screwing the bolt of the fuuel holderr in the carborator, whhichh is generally used for overflow, screw it tight ,

Apr 15, 2014 | 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

1990 Kawasaki ZXR 400 fuel coming out of carbs overflow pipes


Hi, Emma-shj and the usual suspects are:
1. Damaged or restricted fuel tank venting system.
2. Loose float bowl screws.
3. Damaged float bowl o-ring.
4. improper fuel level in the float bowl.
5. Worn or dirty inlet valve or seat.
6. Damaged or leaking float assembly.
7. Particle contamination in inlet fitting cavity.
8. Damaged petcock diaphragm allowing fuel to flow through the vacuum line into the combustion chamber.
9. Contaminated fuel tank.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
carbs pssing fuel out overflow pipe zxr 400 Biker ie Forums
Carbs leaking Here is how to fix it
Kawasaki ZXR400 Service Manual Supplement Free
Kawasaki ZXR400 ZX400 1989 1999 Repair Service Manual PDF Download Manuals... Complete manual $10 download
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Jun 08, 2017 | 1990 kawasaki ZXR 400

2 Answers

When turn on petrol and kick bike, petrol is running out of overflow pipe on carb and bike wont start, and bike sounds flooded.


You have a sticking float in the carburator, due to old gas, or dirt. The float moves a needle that turns on and off the flow of fuel into the carb bowl.

Mar 23, 2011 | 2003 Suzuki RM 125

1 Answer

Gas is leaking from behind front section of chain. what's back there that could be leaking and how do i fix it


Probably carbs overlowing, overflow pipes from the carburettor-s will hang out from below the engine, thus if the float valve sticks in the carb the fuel will overflow away from hot exhaust, you will have to follow pipe up to the offending carb remove float bowl and inspect and clean float valve, you will have to remove float and inspect the valve and its seating for dirt or varnishing which is caused when fuel is left for a prolonged time within the carb

Feb 26, 2011 | kawasaki Ninja 250R Motorcycles

2 Answers

On a kawasaki zephyr 750 set of carbs, where do the two hoses that come from between carbs one and two and three and four go( not the vacuum hoses, or fuel hose. Are these the heater hoses?


They are fuel overflow hoses, and just hang down under the engine. If they are not vacume or fuel lines, then they must be the overflow pipes, one from each carby.

Aug 25, 2010 | 1992 kawasaki Zephyr 750

1 Answer

How do I drain the fuel on my 98 zx9r


go to fuel tap find the pipe which goes to the carb, (make sure your fuel tap is in the off position) disconnect the pipe from the tap (Long nose pliers work0 take off the fuel tap remove the tank from bike find a suitable container for the fuel open the tap and let it flow

Aug 08, 2010 | 1998 kawasaki ZX-9R Ninja

1 Answer

Bad fuel


Turn off fuel tap ,disconnect fuel pipe from carbs .drauin fule using tank tap into container ,or remove thwe tank from the bike ,take care to remove all pipes connected to frame work .like overflow pipe / breather pipes etc etc .

Mar 24, 2010 | 2004 Suzuki VL 800 Volusia

1 Answer

CBX550 carburettor vacuum system


Hi Simon,
Fuel over flowing from the carburators/over flow pipe means the float pins are not sealing off.
You will have to remove the carbs and the float bowls to check the pins and will have to adjust the floats too .
The vaccum fuel tap runs or rather allows fuel to pass by once the engine is running (thus creating vaccum) if you check around the inlate or the carburator mountings, in one of it you will find where to plug in tht pipe.
Hope this helps!

Jul 22, 2009 | 1983 Honda CBX 550 F-F2

Not finding what you are looking for?
2001 kawasaki EL 250 Eliminator V Logo

1,451 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...