Question about 2007 Suzuki GSX-R 600

1 Answer

I have a 2000 GSXR 600 and i just finished painting and polishing the entire bike. The problem i'm having is when i engage the clutch with the kickstand up and put it in first gear it turns off. I checked the sidestand switch and it seems to be fine. Another thing is when bike is off and in gear with clutch engaged the bike does not move. Can anybody help me...

Posted by on

  • MakisRC51
    MakisRC51 May 11, 2010

    Does your neutral sign on the dashboard comes on normally when you are in neutral and turn the key switch to on position?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,167 Answers

Hi mate adjust the clutch cable when you put it into gears the clutch is still grabbing so it needs to be adjusted

Posted on Jul 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Suzuki 600 GSX-R


Hi, Robert and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty ignition switch.
6. Faulty starter button.
7. Faulty kickstand or clutch pull in switch/sensor.
8. Security alarm needs a reset.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
2000 suzuki gsxr 600 wont turn over
2000 suzuki gsxr 600 wont turn over
http://www.suzukigsxr.cz/docs/Suzuki_GSX-R_600_K4+K5.pdf
OEM parts for Suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Jul 02, 2016 | 2000 Suzuki GSX-R 600

1 Answer

My 2000 Suzuki 600 gsxr clutch issues


Replace all the clutch plates and the springs, or get a racing clutch. And stop slipping the clutch to do wheelies :>)

Plates
https://store.schnitzracing.com/suzuki/gsxr600/clutch

Springs
http://www.motorcycle-superstore.com/1508761/d/2000-suzuki-gsx-r600-street-bike-clutch-springs

  • 2000 Suzuki GSX-R600 Clutch - Motorcycle Superstore www.motorcycle-superstore.com/873178/d/2000-suzuki-gsx-r600-clutch Clutch 2000 Suzuki GSX-R600 ... 2000 Suzuki GSX-R600 Clutch. ... it was easy to install and it was the first clutch system i ever put on my 2007 GSXR 1000 ...
  • 2000 Suzuki Katana 600 Clutch Springs - Motorcycle Superstore www.motorcycle-superstore.com/.../d/2000-suzuki...600-clutch-springs Clutch 2000 Suzuki Katana 600 ... KG Clutch Factory High Performance Spring SetFor ... and it was the first clutch system i ever put on my 2007 GSXR 1000 ...
  • GSXR 750 Suzuki Sport Motorcycle Clutch Parts www.orientexpress.com/c-84-clutch_suzuki-sport-gsxr750.aspx ... Clutch Springs Suzuki - GSXR 600 2004-2005/GSXR 750 2000-2005/High Performance/Heavy Duty. Price: $35.95 (USD) GB Racing - Clutch Cover Suzuki ...
  • GSXR 600 Suzuki Sport Motorcycle Clutch Parts www.orientexpress.com/c-84-clutch_suzuki-sport-gsxr600.aspx ... Clutch Springs Suzuki - GSXR 600 ... Orient Express - Clutch Springs Suzuki - GSXR 600 2004-2005/GSXR 750 2000 ... GB Racing - Clutch Cover Suzuki - GSXR 600 ...
  • 2000 Suzuki GSX-R600 Street Bike Clutch Springs ... www.motorcycle-superstore.com/1508761/d/2000-suzuki-gsx-r600... Clutch 2000 Suzuki GSX-R600 Street Bike Parts ... Race Suits; Riding Suits; Riding Underwear; Socks; ... Clutch; Cooling System; Drive; Electrical; Engine;
  • Suzuki GSXR600 Clutch Plates and Parts - Schnitz Racing https://store.schnitzracing.com/suzuki/gsxr600/clutch Shop Schnitz Racing for Suzuki GSXR600 clutch plates, ... Valves & Springs; Exhaust. ... Suzuki GSXR600 Clutch Components and Parts from Schnitz Racing.
  • Suzuki GSXR 600 1997-2000 EBC SRK Complete Clutch Kit www.nicecycle.com/Suzuki-Clutch-Kit-p/ebc-clutchkit36.htm Suzuki GSXR 600 1997-2000 EBC SRK Complete ... heavy duty clutch springs of either ... Suzuki GSXR 600 2006-2007 EBC SRK Complete Clutch Kit Suzuki GSXR 600 ...
  • Sigma Clutches for Suzuki - Bikehps.com www.bikehps.com/acatalog/Sigma_Clutches_for_Suzuki.html Sigma Clutches for Suzuki. Sigma Suzuki GSXR600 & GSXR750 K6-K8 2006-2008 Performance Slipper Clutch . Ref: ... - Requires GSX-R1000 clutch springs (not ...

    Suzuki GSXR600 Clutch Plates and Parts Schnitz Racing
  • Jun 12, 2016 | 2000 Suzuki GSX-R 600

    1 Answer

    How do I fix paint chips on the hood?


    I suggest you keep touching in the spots and building up the level over time until it is slightly proud of the surrounding paintwork. When fully hardened the surface of the spot should be flatted with a small block. I use the end of a short piece of 3/8 or 1/2 inch wooden dowel with a circle of fine abrasive paper glued to it. I sand wet and begin with 600 grit and finish with 1000 or 1200 grit. Once the area is flush it can then be polished with a polishing compound such as farecla and finished with T-cut.
    A coat or two of lacquer can be applied or a few coats of hard wax polish.

    May 07, 2017 | Toyota RAV4 Cars & Trucks

    1 Answer

    I have a 92 fzr 600 when i engage my clutch amd shift into first it dies like the clutch isnt engaged. i checked the clutch cable and it seems to be working fine


    With the engine not running can you select 1st gear pull in the clutch lever and push the bike with no difficulty, if you cant, it may be the clutch plates have become stuck together, this can occure from standing for long periods, if you can push the bike it may be the neutrol safety switch, or the side stand safety switch have become faulty, and cutting the bike out as a precaution

    Jul 25, 2011 | 1992 Yamaha FZR 600

    1 Answer

    No problem. i have a chance to buy a 2007 600 gsxr with 2500 miles in what appears to be emaculate condition for 4000.00. i wanted to find out if there are any major flaws that will make this bike come...


    The biggest difference is that the 2007 GSXR 600 has fuel injection instead of carbs. The FI symbol will alert you that the sensors on the Fuel Injection system have found a problem. When that happens, a dealer will be needed to hook up a code reader to see what the problem is. A dirty air filter is something you can fix. A fuel mapping problem is for the dealer to fix. Minor FI problems still let the bike run. Major problems shut down the fuel system so the engine will not even start. Other than that, just be sure the bike shifts smooth and easy and that all electrics and brakes work properly. How old is the battery? How much life is left in the chain? Does the clutch operate properly? How soon before new tires will be needed? I hope this helps. Please rate my answer.

    Apr 16, 2011 | 2007 Suzuki GSX-R 600

    2 Answers

    I dropped my kawazaki ninja bike in red but cant match the colour due to not knowing the code for the colour


    Hello,

    This website will allow you to find the correct color match for your bike; ColorRite
    Click on the Motorcycle link and enter your bike information.

    If you find this information useful, please vote on this post. Thank you.

    Regards,

    Oz

    Jan 11, 2011 | kawasaki ZX-9R Motorcycles

    1 Answer

    Loss of power accelerating after the bikes warms up GSXR 600 K7


    Did you adjust the freeplay on your clutch lever? You should havee 3-5 mm of freeplay. If so, maybe youjust need a new clutch.

    May 12, 2010 | 2007 Suzuki GSX-R 600

    5 Answers

    Loss of power accelerating after the bikes warms up GSXR 600 K7


    I believe the clutch disc is slipping. This is not something that will get better on it's own. Clutches are wearing parts. When they are worn out or dangerously out of adjustment the clutch will slip. That is to say it will not transmit as much of the available power to ground as it should. You must get this fixed as soon as possible. If you do not know how to adjust the clutch cable find someone who does and pray that you have not already glazed the clutch. Glazed clutches have to be reworked or replaced. Either way it is a big expensive job. Get it done. Ride easy or not at all until you get it fixed. Good Luck.

    Mar 20, 2010 | 2007 Suzuki GSX-R 600

    2 Answers

    Plastic Fading


    If i remember right you can actually spray paint a new finish on.

    Mar 07, 2009 | 1985 Honda XR 600 R

    Not finding what you are looking for?
    2007 Suzuki GSX-R 600 Logo

    212 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers

    Ed Nelson
    Ed Nelson

    Level 2 Expert

    149 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...