Question about 1998 Honda CB 250 Nighthawk

1 Answer

Honda cb250 no start

Use bike everyday to comm. work place, once a week
motor can not start and I use a car.
battery ok, motor clicking but no start, last time it happen after all night raining???

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 221 Answers

Check battery voltage,then battery voltage drop at starter relay [solenoid] if battery is good replace relay but make sure all connection are good

Posted on Jul 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I access rear brake reservoir that I may add brake fluid on 1995 Honda nighthawk cb 250


Hi, Anonymous a 1995 Honda CB250 Nighthawk has drum brakes front and rear. Newer bikes with disc brakes will have a brake fluid reservoir.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How to adjust the rear drum brake on motorcycle
2 HONDA ELITE FRONT DRUM BRAKES REPLACE AND ADJUST
Honda CB250 Shop Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB250 Nighthawk Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



Mar 30, 2017 | 1995 Honda CB 250 Nighthawk

1 Answer

1993 Honda CB 250 Nighthawk will not turn over


Hi, Ashley before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter motor or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. Faulty ignition relay.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1991 Honda Nighthawk CB250 suddenly won start help
What Do Check When My Motorcycle Won Start Honda Shadow Forums Shadow...
Honda CB250 Shop Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB250 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 05, 2013 | 1993 Honda CB 250 Nighthawk

1 Answer

Want to put a solo seat on a 1994 Honda CB 250 Nighthawk


Hi, 99percentrig the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Other Seating Parts for Honda Nighthawk 250 eBay
Want to put solo seat on 1994 Honda CB250 Nighthawk Google Search
Honda CB250 Shop Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CB250 Nighthawk Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 12, 2013 | 1994 Honda CB 250 Nighthawk

1 Answer

Honda Hornet wont start


I am having trouble with your english translation of the symptom. However, if your bike starts and runs fine once it is warmed up and initially starts fine in warm weather this indicates a clogged choke circuit in the carburator and will require a thourough and proper cleaning of the carb.

Dec 30, 2012 | Honda Hornet 250 Motorcycles

1 Answer

1991 Honda CB 250 Nighthawk will not turn over


Hi, Anonymous before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
The Official
Bike won turn over Other Bikes goldwingdocs com
Honda CB250 Shop Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CB250 Nighthawk Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 22, 2012 | 1991 Honda CB 250 Nighthawk

1 Answer

2000 Honda CB 250 Nighthawk no electrical power no electrical power


Hi, Anonymous before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1991 Honda Nighthawk CB250 suddenly won start help
Troubleshooting No Start Honda Motorcycle
Honda CB250 Shop Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CB250 Nighthawk Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


May 03, 2012 | 1992 Honda CB 250 Nighthawk

1 Answer

Bike will not start, clicking noise, lights and indicators working ok - done this twice in a week but started ok, but now won;t start at all


If there is a clicking sound it is most likely the battery that is too weak to pull in the solenoid and hold it there while the starter drains the current. I think you need to either charge or replace the battery.

Apr 16, 2011 | 2007 Honda CBF 500

1 Answer

I have a 1992 Honda Nighthawk cb250, with only 800miles on it. Been ridding around the last two weeks and this happened while I was out: I was letting off 1st and it reacted like I stalled. I went to start...


This motorcycle is very reliable and troble free and the ingtion module seldom if ever fails. The kick stand switch will not let the motor run in gear with the stand down. The switch can fail or get unplugged or dirty, The buke will run if the bike is in neutral with the stand down but the neutral light has to work. If the battery is low or bad 10 volts ( it'll crank but it don't start) the lights might look Ok too. Unless you remove the plug wire from the plug and place it connected to a spark plug or spark tester and see it frie or not fire your not a good test. The plug could be foulded with gas the cylinder can have lost compression( overheating) lack of oil. The ingtion module should hav some dielcctric compuund in it to dis a pate heat. this is normal, the coil is more likly and does fail the the module. Modules fail from bad batteries and jump starting wrong to hooking the battery up backwards. The coil fails from overheating and high mileage. Freezing and cracking in cold storage and may work awhile afer broken. Your bike is old even though the mileage is low. Electrical connections fail as they rust and reconning them all is agood place to start. You dont have to know what the wiring connector does just unplug it and replugf it to get a new connection. The battery cable on the ground side is well known to fail and following the wire to all the places it bolts on and unbolting and replugging or bolting all of these and cleaning any rust found way repair the bike completely/ You say thats a lot of work . Most bikes that have sit for more than a year have this done just to get them to run and a new battery is key as are it's connections. Skipping staps to get to thend quickly it's the step you skipped that might leave you a long way from home or not let you go in the first place.

Apr 04, 2011 | 1991 Honda CB 250 Nighthawk

1 Answer

1985 Honda VF 1000 R will not start when hot


Hi, Persto_belik and the usual suspects are:
1. Faulty ignition coil.
2. Faulty spark plug cables.
3. Faulty temperature sensor.
4. HISS light not going off.
5. Faulty starter motor.
6. Valves adjusted too tight.
7. Spark plug gap too wide.
8. Fuel has vapor lock.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to diagnose cranks but won start condition
06 hard to wont start after warm
Honda VF1000F 1985 Shop Manual
https://www.partsfish.com/page/oem-parts-for-honda
http://www.ownersmanual.biz/honda-vf-1000-r-owners-manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 03, 2011 | 1986 Honda VF 1000 R

1 Answer

2003 honda cb250 no start


starter solinoid has got wet,spray the electrics with wd40 to displace the water. if this does not remedy the fault then the starter solinoid will have to be replaced..hope this helps

Jul 02, 2009 | 1998 Honda CB 250 Nighthawk

Not finding what you are looking for?
1998 Honda CB 250 Nighthawk Logo

Related Topics:

633 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4988 Answers

yadayada
yadayada

Level 3 Expert

80407 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...