We have a 2012 Kawasaki Brute Force 750. The battery won't stay charged; we checked it, and it is good. The battery volts were 12.5 amps not running, and 12. running, so we tried a new rectifier, and there was no change. Any advice on what to do next? Kawasaki denies that they've had any problems with them. Thank you [email protected]
Quick answer is you need a new battery as you should have 13 to 14 volts when not running and this will drop to 12.5 volts when starting due to starting loads on the system,
SOURCE: 2000 yamaha r1000 charging problem
Maybe the voltage rectifier has gone bad. I would try getting a new one.
SOURCE: I have charging problems on a 2002 yamaha 1100
Have the battery checked. may not be holding a charge and is discharging during use. all seems to point to poor batt status
SOURCE: 2006 Kawasaki Brute Force 650, no power when key is on?
i have the same thing with my brute force what is it ??????
SOURCE: battery wont stay charged will
I would say the voltage regulator is not working. Has an altenator wire been damaged?
Testimonial: "very help full probly not the stator"
SOURCE: Kawasaki Brute Force 650 4x4i
Install new spark plugs and go easy on the throttle when starting. A power valve squirts extra gas every time the throttle is twisted. Twist too often when starting and the engine floods. Please rate my answer. Thanks!
1,023 views
Usually answered in minutes!
×