What is the cause for my kodiak 400 shift lever not to move into reverse or park

get a colortune tool.it shows how your firing.read instructions that come with,so simple to tune carb in with.sounds like pilot out of adjustment.could also have a leak in ur carb boot or head.take a torch without lighting open valve with motor running run torch around gaskets and front of carb boot listen for change in motor.if it gets higher rev uve found a leak.

probably needs adjustment of shift cable.

IS THE CARBURETOR AIR FILTER CLEAN?

your shift linkage could be out of adjustment. the two rods that run to your transmission. try disconnecting one and see if it shift *(without the engine running), then do the same thing for the other. if it shift into high without the low gear shift linkage disconnected, then they are out of adjustment.

shift lever might need adjusted

sounds like linkage problem check linkage

Verify that the shift cables are making a complete shift at the tranny, if the cable has failed or stretched, it may not be shifting completely. Most Suzuki King Quads have a metal shift rod on the left side which select low high and super low. And also have a shift lever on top. The vin number is usually located on the rear uprights behind the seat. Also there is usually a date stamped on the seat itself that may help.

as soon as your bike begins to high idle it will not fall into gear you probably will need to set your linkage on your shifte

im having the same problem did you find out what it was

Is this an electric shift?? SORRY.. take it to a qualified professional!!