Question about 2002 Yamaha TT-R 225
Usually this indicates a lean fuel/ait mixture. Remove the main jet and note the number stamped on it. Go to your dealer and give him the VIN from the frame. From that number he can tell you exactly what year, model and engine size you have. Now ask them to check the stock main jet number. If different than what is in the bike then get the stock jet. Check the manifold between the carb and cylinder. If any rubber seals or hoses are hard, then replace them. This will eliminate air leaks on the intake leaning the mix. The image below is for a 1995 model. On the carb main jet and nozzle (in red), make sure they are very clean inside and out.
A “very helpful” rating on this answer? Thanks!
Posted on Jul 02, 2009
??. has this bike been rebuilt. I worked on a older honda once that had been locked up (hydraulic - engine full of gas) and they tried to pull it off with another bike.. when it was rebuilt.. it ran until the exhaust got RED HOT... in the end..(after ALOT of trouble shooting) the problem ended up being a BENT CONNECTING ROD!!. Once it was replaced, the problem went away!!
CRAZY hard to find!!
Posted on May 31, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 13, 2017 | Yamaha Motorcycles
Apr 04, 2014 | 1995 Yamaha FZR 1000
Sep 05, 2013 | 2004 Yamaha YZ 450 F
Sep 01, 2013 | Yamaha YZ 450 F Motorcycles
Feb 28, 2013 | 2009 Yamaha WR450F
Oct 16, 2012 | 2010 Yamaha TTR230
Sep 09, 2012 | 2005 Yamaha WR 450 F
Sep 02, 2012 | 2002 Yamaha YZ 426 F
Jul 27, 2012 | Cars & Trucks
Jul 07, 2010 | Yamaha YZ 250 F Motorcycles
1,195 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: