Scooter zumma
SOURCE: FOR Yamaha XF50 model Yamaha c3 scooter stolen ignition wires cut
Just pick up some wire connector unions with some shrink wrap.,Identify first the identical matching wire colors (each wire will have a color, example: red with a white strip connects to the other red with white strip etc.) do this to all the wires being sure to slide a length of shrink tube up over one side of the wire before crimping the connector with the two ajoining wires together then slide the tube over the wire crimp connector and use a lighter or heat gun to heat the rubber shrink tube to seal the connector. Do this to all the cut wires one at a time until all are joined together withe union crimping connector method. Be sure you positively identify the color of the wire and its backround stripe color along with the other identical wire that it needs to connect to, you don't want to hook the wires up wrong it could burn something out be caareful and positive the color patterns on the wires to be unioned are identical if you do you will be alright in this job.
SOURCE: Looking for a wiring diagram for a Yamaha BWS 50
The service manual has a diagram, but you need to zoom in to read the colors.
You can download a free one at
http://www.yamaha-motor-europe.com/community/service/manuals.jsp
Good luck!
SOURCE: yamaha 150 scooter seat does not open
try and get your hand under the left side rear finder and reach for the locking cable and pull the cable down that should release the locking device.
276 views
Usually answered in minutes!
×