Question about 2010 Hyosung GT250R

1 Answer

Speedometer and odometer not working 2010 Hyosung GT250R

The digital dash works. Speedometer just stays at zero though and odometer doesn't move either. Gas gauge works though. Any ideas? @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Hyosung Master
  • 55,806 Answers

Hi, Anthony and the usual suspects are:
1. Contaminated or faulty speed sensor.
2. Faulty turn signal module.
3. Corroded, broken or loose connector pins/sockets in the wire harness between the speedometer and the ECM or TSSM and the sensor.
4. The speedometer unit has failed.
5. Speedometer instrument fuse has blown.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://korider.com/index.php?topic=24526.0
how to fix broken speedometer and odometer
HYOSUNG GT 250 Service Manual
https://alpha-sports.com/Parts/H_GT250R.htm?q=hyosung-parts
HYOSUNG GT250 FI Owner Manual

Posted on May 15, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Audioaholic
  • 376 Answers

SOURCE: my 2008 hyosung gt250r doesnt start, all light and

does it crank over?....if so check spark...fuel...etc...try to narrow it down to a actual problem such as carbs clogged, or injector not working, other than wont start, not able to tell much from that.

Posted on Sep 11, 2009

seanpwright
  • 2030 Answers

SOURCE: 2008 hyosung wont start

I am assuming you mean with the starter button.

If thats the case check that you have power to the button, and if so powewr coming out of the button.

If all is good this far, check the starter solenoid and starter for operation.

try taking 12v directly to the starter and see what happens..if it turns then the problem is before the starter.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Posted on Sep 11, 2009

wayneman01
  • 301 Answers

SOURCE: Hyosung GT250R indicator not working

It sounds like:
1) One of the wires that takes power to the right hand turn signals is shorted to the chassis.
2) One, or both, of the right hand turn signal bulbs is burnt out.
3) The turn signal switch has failed.

Posted on Nov 18, 2009

Testimonial: "Hey Wayneman, The rear indicator bulb was burnt out. Problem solved. Thanks so much. I really appreciate it :) Cheers, Ross"

  • 4 Answers

SOURCE: the digital dash does not work at all my bike is

check chip type fuse relays

Posted on Dec 02, 2009

afarri
  • 1386 Answers

SOURCE: I jumped my Hyosung GV

Hello and welcome to FixYa!
Looks like that the stator is faulty. This might be damaged after you jump the battery. I believe you'll be good after the stator replacement.
Hope this helps and thank you for using FixYa! Have a good one!

Posted on Sep 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Hyosung Comet GT250R wiring diagram


Hi, Jayden it could be a connector from the lighting coil, for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2007 Hyosung Comet GT250R wiring diagram Google Search
gt250r wiring schematic
HYOSUNG GT 250 Service Manual
HYOSUNG Aquila GT250 Ej Service Manual
http://www.hyosung.hu/download/pdf/data/alkatresz-katalogusok/GT250%20PARTS%20CATALOGUE.pdf
http://www.alpha-sports.com/hyosung_parts.htm
HYOSUNG GT250 REi Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jan 08, 2018 | 2007 Hyosung Comet GT250R

1 Answer

All gauges suddenly not working


Check the fuse panel first. Has anyone been under the dash recently, sounds like a harness plug is not quite home.

Nov 07, 2013 | 1998 Toyota Camry

1 Answer

When riding my Hyosung gt250R '11 the digital speedometer fluctuates randomly between 0 - 300 km/h and iv'e noticed greatly increases the rate at which kilometers are recorded on the odometer. I have...


Hi, Jordan the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://files.hyosungmotorsusa.com/GT125_250_Service_Manual.pdf
https://www.alpha-sports.com/Parts/H_GT250R.htm
HYOSUNG GT 125R Manual
Hyosung GT250R 2011
Hyosung GT250 Wikipedia

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 03, 2017 | 2011 Hyosung GT250R

1 Answer

My speedo reading on my hyosung gt250R '11 fluctuates between 0 - 300 km/h whilst i'm riding and is clocking kilometers on the odometer much fast than it should. I've noticed whilst travelling at a decent...


Sounds to me as if you've bleed over between tach and speedo.Maybe a wire cross and touching between the two.Possibly a Faulty pickup on the speedo too.

Oct 01, 2013 | Hyosung Motorcycles

2 Answers

Gas, fuel, and temp gauge doesn't work


You have blown a fuse..check fuse box. There may be one fuse box one in the cabin but also check for the fusebox in the engine compartment.

Oct 04, 2017 | 1992 Dodge Caravan

1 Answer

2011 Hyosung GT250R instruments keep resetting


Hi, Kingsley for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Hyosung GT250R clock repair
HYOSUNG COMET 125 Service Manual
HYOSUNG GT 250 Service Manual
https://www.alpha-sports.com/Parts/H_GT250R.htm
HYOSUNG GT 125 Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 12, 2017 | 2011 Hyosung GT250R

1 Answer

1990 stanza speedometer doesnt work


if its digital its either the gauge cluster or the sender on the transmission. however its most likely not digital, youll see where the cable goes into the back of the transmission, theres a gear there that runs it, alot of the time they are plastic and get worn out over time. or it could be the dash is having an issue. hope this helps

Feb 11, 2012 | Nissan Stanza Cars & Trucks

1 Answer

I have a 1999 Plymouth Voyager mini-van - 4 cylinder, 2.4 engine. It drives good but the gauges are not work sometimes. The temperature gauge stays at zero; the odometer/speedometer either stays at zero or...


There have been several issues with the instrument clusters in the Voyagers and Caravans. The circuit board can have cold solders at the plug connection causing an intermittent failure of the instruments. The fix is to remove the trim under the dash, around the steering wheel and in front of the cluster. This can be done with just a phillips screwdriver and some patience. Once this is out of the way there are 4 screws that hold in the cluster. Remove the cluster, and with a low temp solder gun, heat the solder points where the plug connects until they are liquid and reset themselves. Reassemble the cluster and check them before you put the dash assembly back together.

Oct 18, 2010 | 1999 Plymouth Voyager

1 Answer

What do I do if I the gas gauge and speedometer doesnt work?


No help but my gauges stopped working at about the same time on my '98 Frontier. So far, the fuel, temp., speedometer, odometer and trip gauges don't work or some work at different times after starting the engine.

Sep 09, 2010 | 2001 Nissan Xterra

Not finding what you are looking for?
2010 Hyosung GT250R Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5851 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

richard libby

Level 2 Expert

202 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...