Question about 1994 Honda CBR 600 F(2)R

1 Answer

My rear turn signals will not turn on not even as running lights i have lights in the front but no signals is it just a bulb maybe a ground??? but sometimes when u hit a bump they will work until u hit another

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 408 Answers

First check the turning light's relay.Use cables straight from the battery to test each turning light separately to make sure that nothing's wrong with them.

Posted on Jun 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger side front turn signal/DRL do not work.


Dear Alex,
The problem is in the bulb, or the socket, or the wiring to these.
Whenever a turn signal flashes fast, know that one of the bulbs is not working.
You have already identified the problem as being the front one. Problem could be the hot wire, or the ground wire, or the ground connection to this bulb.
Start by taking a tester to the hot wire, and see if it is receiving electrical impulses when the turn signal is on.
( It probably is, unless the car has been in a wreck and has been improperly repaired.)
Then check the socket or the wires to is and see if the bulb is grounded.
I suspect the ground is defective, and either a new socket or a repair to the ground wire should fix you rights up.
God bless your efforts.

Aug 02, 2016 | 2002 Pontiac Montana

3 Answers

My left turn signal was flashing fast. I checked bulb in back left. Turn signal good but bulb below it was out. I changed that one but turn signal still flashing fast. all other bulbs look good. ??


If the front and rear bulbs flash fast also, replace the hazard switch or you could live with it. As they are working. If one doesn't work, check grounds. I just run a new ground, much easier than cutting open the harness to find the break.

May 31, 2015 | 2012 Nissan Rogue

2 Answers

69 turn signal problem left turn signal not working. right turn signal causes both to falsh


it's the grounds if they're both flashing fast it's definitely grounds take a test light and see if its got power goes through the test light grounded to the frame and if the light comes on then it's definitely your grounds

Jul 29, 2014 | 1969 Pontiac Firebird

1 Answer

Grand prix front turn signals lights will not work but rears flash rapidly.


Definitely not the flasher, as long as it is flashing or blinking somewhere. Rapid flashing indicates a burned bulb, but since you already tried new bulbs in front, possibly bad bulb sockets, loose connectors, or a bad ground for the front bulbs. If you have a test light or voltmeter (multimeter), check for power at the socket when turns are on. If power then at the front, try new bulbs or trace the ground for those lights. If no power to the socket for turn signals, recheck wiring.

Apr 02, 2013 | 1995 Pontiac Grand Prix

1 Answer

Rear turn signal does not work


If the indicators on the dash are staying lit all the time, it is because you likely have a bad ground to one of your running lights, causing the running lights to ground through the turn signal circuits. This is often caused by either a bad socket assembly at one of the bulbs or an incorrect bulb is installed in one of the sockets. You need to check FRONT and REAR lights to see which one is not working correctly. Also check the running lights and marker lights on BOTH sides of the vehicle. There will be SOMETHING that will not look the same from one side to the other if the left side is working correctly and the right side is not. Please keep in mind that you cannot use the right REAR turn signal without also using the right FRONT turn signal. The problem could be at EITHER end.

Dec 26, 2011 | 2001 Chevrolet Venture

1 Answer

I HAVE A 1997 HONDA SHADOW 600 FRONT BLINKERS WORK FINE RIGHT REAR WORKS FINE BUT LEFT REAR WILL NOT BLINK LEFT FRONT DOSE BUT FAST I CHANGED BULB IN LEFT REAR DID NOT HELP IS IT A BAD FLASHER


If you have changed the blinkers over to LED lights , you need to put diodes on the wires to stop the fast flash. Honda turn signals Have to grounded to the green ground wires in the harness. You can not ground them to the frame or other wires or the flasher system will not work correctly. Double check that all the wires are connected to the harness correctly (They are color coded). Blue with white band is the same as blue with white stripe. Orange with white band is the same as orange with white stripe. If you have crossed the wires on the front turn signals you may be powering the rear turnsignal with the running light. The running light is the dimmer half of the bulb. The turn signal/flashing light is the brighter side of the bulb. Inspect your wiring carefully.

Mar 18, 2011 | 2004 Honda VT 600 CD Shadow

1 Answer

Running lights work but no blinkers or brake lights. Changed fuses and bulbs no luck


I'm inclined to believe it is the turn signal switch. When you select left or right, the brake light is removed from that side, and the flasher is connected to the bulb instead, making the brake light on that side flash as the indication that you plan to turn. You have lost everything, but the simple answers check out.

If you have lost signals, brake lights and tail lights, then it is more likely that the ground supplied to the bulbs is not working, since the tail lights share noting in common with the brakes lights and turn signals but ground.

If the tail lights work, the fact that the brake lights and rear turn signals share that switch starts to look meaningful — even more so if the front turn signals also don't work. But the front signals and the rear signals use different circuitry in the switch, so it would be something more mechanical in the switch than electrical in that case.

Jun 24, 2010 | 1991 Buick Regal

1 Answer

Front turn signal does not blink when turned on. bulb lights when lights are turned on.


Have you checked the rear turn signal on the same side? Usually when one (1) turn signal stops blinking another bulb on the same side has failed. It can be rear or side lights but most of the time it is the rear light on the same side that has failed so the front light will not blink.

Also I would check to see if there was 12V when the turn signal is selected and a ground on the bulb socket. (signal off)

Does the bulb have one or 2 contacts on the base of the bulb besides the barell? If it is a 2 contact bulb (1157) then there are separate circuits for the turn and parkling lights. Follow the socket wires back to the connector and check to see if there is corrosion in the socket or the pigtail connector. All of the terminals socket and pigtail connector should be clean. Also check for signs of any breakdown in the wires especially around terminal ends.

Your dealing with a 2 wire series circuit... power and ground. It takes both to make the bulb light.

Check the ground for Zero (0) Ohms and power for 12V. One of them has to be missing and you will need to find out where the break is in the circuit.

Often the ground is provided by the turn signal selector but if the selector is bad all lights on the same side would not work. If the rear light works and the front light does not then your problem is probably very near the front light.

1. Dirty socket terminal
2. Poor pigtail connector connections
3. Broken chassis ground or power wire

Thanks for using FixYa.

Kelly



Mar 17, 2010 | 2005 Chevrolet Cobalt

1 Answer

The right rear turn signal blinks quickly in a


I believe this car has a rear bulb that has two fillaments, one for side lights the other shared for braking and flash. sounds like a blown bulb or a bad ground connection. Check the bulb and the bulb holder and ground connection.
Turn signal blinking quickly generally indicates a blown bulb front or rear or bad connection.

Dec 20, 2009 | 1993 Mercury Cougar

Not finding what you are looking for?
1994 Honda CBR 600 F(2)R Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...