Question about 2005 Honda CRF 100 F

1 Answer

If the kick is jamned that means the fly wheel is cracked

Take it to get it replaced

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

The flywheel is on the left side of the engine. I think you are referring to the outer clutch hub. The kick gear moves outward to engage the clutch gear. The usual problem is the ratchet or the starter spring.

A “very helpful” rating for this answer? Thanks!

if the kick is jamned that means the fly wheel is  - 043f8a3.png

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My craftsman 190cc 625 series lawn mower stopped and a friend said that there is a pin that drops when the mower blade gets caught and stops, I'm really in need of help on how to get to the pin if possible...


Wow it's a lot of work it's called the fly wheel key that is sheard. In every case like this you have to make sure you remove the spark plug or uncap the spark plug. Remove the pull cord assembly and then use a pipe or wooden board to keep the blade from moving underneath the mower. VERY VERY IMPORTANT TO USE A CLAMP TO HOLD DOWN THE CLUTCH BRAKE AND DO NOT REMOVE IT TILL YOUR FINISHED OR YOU'LL BRAKE OFF THE BRAKE FOOT ON THE LEVER. Use a breaker bar to remove the bolt holding the fly wheel down. Now here is the hard part. The fly wheel is made of aluminum and can brake easily as well as the fly wheels blades. If it cracks or the fly wheel blade is cracked or broken it's junk. If you don't have a Briggs and Straton puller you can use a lug wrench and pry the fly wheel up. You must first place the nut back on the 1 inch bolt on the center shaft so the threads are not showing at the top of the drive shaft. You have to hit the nut on the center hard but not like to hard to brake anything. After you get the fly wheel off you have to use the model and serial number to get the key from a lawn mower shop. Place the key under the fly wheel and very carefully watch to see if it lines up as you push the fly wheel down. Push it down from side to side so it fits flush. Tighten the bolt. Don't start it first see if when you pull the pull cord it moves with out pulling the rope back into the mower. You'll have to make sure the top bolt is tight like maybe 60 pounds. MJ
cf156b82-da8c-4915-b3c7-2a8dfd8a8d57.jpg

Sep 29, 2014 | Garden

1 Answer

I have a lawn mower that has a kick back when trying to start


do you mean it pulls the cord out of your hand, if so it could be the fly wheel key (that is what they call it) you will have to take the top off the mower by taking out the screws and take off the metal housing covering the fly wheel. then check that the notch in the fly wheel is lined up with the notch in the motor shaft. sometimes it moves if you hit something and it breaks the key,

Sep 06, 2014 | Garden

1 Answer

Pressure plate torque


I have seen this problem many times, people change clutches but don't machine the fly wheel. this causes a shudder or the other thing is a crack in the fly wheel or pressure plate, sorry but transmission out fly wheel off to be machined, new clutch and pressure plate

Dec 04, 2013 | Cars & Trucks

1 Answer

Changing fly wheel on 3.4l chev . Need to replace


its easier to remove the lot ,then you cannot damage the torque converter drive on re-assembly

Jun 25, 2011 | 2006 Chevrolet Equinox

1 Answer

Cracked flex plate. 2002 Elantre w/auto trans???


you can try to buy new fly wheel or flex wheel at a auto parts stores but more likely dealership part.reason for flex plate to cracked due to stress and heat or starter bolt breaks causing starter hit flex wheel.

Apr 15, 2011 | Hyundai Motor 2002 Elantra

2 Answers

My truck starter seems to run but does not crank motor-just hums then stops. New cables ,battery, solenoid have been installed? It will crank over if I throw my engine starter on it. But the batery has...


are you sure you got a good solenoid?souds like it's not kicking the starter bendix out for the start.if it hums that means it's turning right? it has to be the solenoid not kicking the starter bendix into the flywheel to start the engine.i would try another solenoid. thank you for choosing fixya.com

Jan 10, 2011 | 1981 Ford F 100

1 Answer

Huge oil leak


You have replaced it twice, perhaps the fly wheel is cutting it or inside the part that connects to the crankcase is an "O"Ring or you have to inspect the fly wheel look for cracks, inspect the seal that You all ready removed

Jan 22, 2009 | 1995 Nissan Quest

Not finding what you are looking for?
2005 Honda CRF 100 F Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...