Front wheel torque specs
SOURCE: torque specs for derby , inspection cover, &
what is the torque specs for a derby cover on my 2009 Soft tail?
SOURCE: Need the torque specs on clutch for a 85 FLHTC
The torque specs are the same as with any Evolution engine. The compensator sprocket 150-165 foot pounds.
Clutch hub nut (left handed threads) 60-80 foot pounds.
Use Loctite 271 on threads. Two lines in nut on Compensator and one line in clutch hub nut.
SOURCE: brake caliper torque specs
I'd put a drop of Loctite 242 (med. strenght blue) on the threads of each bolt and torque them to 25 foot pounds.
Testimonial: "the loctite is something I use always anyways, I was just wondering what to torque em to...thanks!!"
SOURCE: need torque specs for front wheel cross pin and
Front axle nut = 50-50 ft. lbs.
Front axle pinch bolt and nut = 21-27 ft. lbs.
Front brake caliper mounting bolts = 25-30 ft. lbs.
Handlebar clamp bolts = 12-15 ft. lbs.
Front Fork
Upper bracket pinch bolts = 30-35 ft. lbs.
Lower bracket pinch bolts = 30-35 ft. lbs.
Fork stem pinch bolt = 30-35 ft. lbs.
Front fender fasteners = 9-13 ft. lbs.
SOURCE: What are the torque specs for the front wheel nut
Front axle is 30Nm and pinch bolts are 19Nm
Brake calipers to fork leg is 38Nm
Testimonial: "Thank you"
1,024 views
Usually answered in minutes!
×