Disconnect the negative battery cable
Remove the seat
Remove the T27 Torx screw securing the front of
the console to the fuel tank.
Remove the two T25 Torx screws and washers securing the rear of the console mounting bracket to
the frame.
Lift the console partially up off the fuel tank, and
disconnect the electrical connector from the ignition switch, the indicator lamp and speedometer.
Remove the reset switch from the console.
Carefully remove the console and lay it upside
down on shop cloths or towels.
Remove the rubber boot from the odometer reset switch on the left side.
Remove the acorn nut and washer securing the console to the fuel tank.
On fuel injected models, disconnect the fuel pump electrical connector.
Lift the console partially up off the fuel tank and lay
it upside down on shop cloths or towels.
Unhook the ignition switch harness from the clip on the side of the console.
Disconnect the electrical connector from the ignition switch the speedometer and the indicator lamp assembly
Remove the odometer reset switch from the left side of the console.
The fuel pump and filter assembly is located inside the
fuel tank. This assembly is part of the removable canopy
attached to the top of the fuel tank. The canopy provides
easy removal and installation of the attached components
without having to work within the fuel tank cavity. An inlet screen on the fuel pump and the secondary fuel filter
canister are located downstream from the fuel pump to
provide maximum filtration before the fuel reaches the
fuel injectors.
SOURCE: softail fxst 2003, what type & name is the
Harley Davidson uses Keihin CV Carbs on their carb equipped machines.
Good Luck
Steve
504 views
Usually answered in minutes!
×