Question about 2002 Yamaha YZF-R1

1 Answer

2002 R1 engine slips on high RPM

Hi there
I have a 2002 R1 with 15k miles.
when i get to 8k-9k RPM and pull the throtle the engine "slips" to high RPM without providing the power and tourqe.
what can it be? it feels like u r puling and releasing the clutch slowly in the middle of an acceleration.
also i notice that if you try to wheelie the engine will slip and the back wheel swirl a bit instead of getting the bike to wheelie.

Posted by on

  • schazon Jun 30, 2009

    Thanks.

    ikt was the clutch.

    was $150 with labor to replace the whole clutch kit.

    not a big deal.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 375 Answers

From the sounds of your riding style (wheelies, etc.) you have burnt out the clutch.
No matter how much fun you think it is, Yamaha never designed them to be a toy to do wheelies. It is a sportsbike designed to go round corners fast.
The only silver lining is, hopefully the cost of replacing the clutch will stop you riding like a fool in future.

Posted on Jun 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamaha 2002 2nd gear slipping


Hi, Tanya for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/101-98-99-r1-mechanical-help/257319-2nd-gear-problems.html
2003 R1 slip in 2nd gear
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 07, 2012 | 2002 Yamaha YZF-R1

1 Answer

1996 Honda CBR 1000 F clutch slipping in 3rd gear


Hi, Chris and the usual suspects are:
1. Clutch controls improperly adjusted.
2. Insufficient clutch spring tension.
3. Friction discs or steel discs are worn or warped past specs.
4. New wet clutch not pre-soaked for 24 hours.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
GL1100 clutch slip 3rd gear
Clutch slipping in 3rd 4th 5th gear GL1000 Information Questions...
Honda CBR1000f Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR1000F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 15, 2012 | 1994 Honda CBR 1000 F

1 Answer

Engine Runs Rough at Idle


go to auto zone,its free ck.throtle senser

Feb 19, 2012 | 2002 Ford Explorer

1 Answer

2003 r1 fuel injection battels to rev after 6000 rpm


Hi, Tom for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
bike will not rev past 8k like hitting the rev limiter
Can rev past 6000rpm under load Why
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 11, 2011 | 2007 Yamaha YZF-R1

1 Answer

2004 R1 engine turns off after idling for awhile. Happen on the road quite a few times, clutch pulled, gear 1 selected. eg, red traffic light, you stop with gear 1 n clutch pulled. RPM slowly goes below 1...


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Air/fuel mixture screw improperly adjusted.
10. Accelerator pump damaged or not working.
11. Water or dirt in the fuel system, carburetor or filter.
12. Restricted, blocked or kinked fuel line.
13. Fuel tank empty.
14. The gas cap is not venting properly or fuel tank venting system blocked.
15. A failed fuel pump, pressure regulator and or fuel injectors.
16. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
17. Needle and seat stuck closed in the float bowl.
For more information about your issue and valuable "FREE" downloads that you need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/104-04-06-r1-mechanical-help/98831-2004-r1-cuts-out-update.html
Yamaha R1 2004 Engine Shuts Off In Stop And Go Traffic
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 23, 2010 | 2004 Yamaha YZF-R1

2 Answers

2002 Hyundai Elantra 100k miles - 2.0l - running rough


sounds like the throtle position sensor is miss alined or the idle screw is backed off

Dec 16, 2009 | Hyundai Motor 2002 Elantra

1 Answer

I have a Yamaha DT50W with poor low end power. Engine runs fine at high rpm but bogs at low rpm and will not pull up hill without reving engine and clutching. Engine responds normal with no hesitation on...


yep sounds like it needs rings the dt50w usualy has lots of torque down low so if you are having ti rev the **** out of it somthing is not right only other option would be that the previous owner messed with the sprokets to get more speed but lost low end torque
good luck

Oct 17, 2009 | Yamaha DT 125 R Motorcycles

2 Answers

Engine cuts out with clutch engaged.


idle adjust?
there SHOULD be an adjuster under the seat or gastank within easy reach. Clockwise to increase rpm, ccl to decrease rpm. idle around 1400rpm when engine is at normal operating temp. Good luck!

Aug 04, 2009 | 2002 Yamaha YZF-R1

1 Answer

1994 dyna with 9k miles, engine vibration just started past 1k mi


Check all the engine mounting bolts to the frame, they could be lose!

Jun 24, 2009 | Harley Davidson FXDL Dyna Low Rider...

1 Answer

My car is jerking while accelerating and reaching certain RPM


clean mass air flow sensor check for mil light

Jun 01, 2009 | 2002 Buick Century

Not finding what you are looking for?
2002 Yamaha YZF-R1 Logo

Related Topics:

668 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Tom

Level 2 Expert

314 Answers

vince

Level 3 Expert

1216 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1165 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...