- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This may sound weird, but do a oil change and filter. These cars are known for sticking lifters and throwing a limp home code. If that don't work clean the throttle body or possibly replace it. I would also add a quart of Lucas oil when doing oil change that will help with sticky lifters greatly..
you have apparently drain the transmission fluid out of the trans pan. check your oil level to see if it is overfilled, this would be a good indication especially if you didn't have to refill the oil with at least 5 quarts.
Your dyna should take three quarts of oil. The oil level will be above the "FULL HOT" mark until you start the engine and fill the new oil filter with oil. Start the engine and run it for one minute. Recheck the oil level with the dip stick. It should be in the safe operating zone. Do not top off the oil level. Do not add oil until it drops to that Add One Quart level.
A typical automobile holds 4-5 quarts of oil.....Depends on the size of motor. If changing yourself, Drain out all oil, change filter, put oil plug back in. Put 3- 31/2 quarts back into car. put oil cap on and start car. Let run for 2-3 minutes then shut back off. Wait for a few. Pull out dipstick wipe, put back in then pull out a second time...Now you know how much you need to top off level.
×