Question about 2000 Harley Davidson XL 1200 C Sportster Custom

1 Answer

Blinkers dont work

Bike was knock over then when picked up blinkers & runnin lights quit working

Posted by on

  • harleyd75 May 11, 2010

    please restate this in English - Thanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

The problem is in the TSSM (Turn Signal Security Module).It has a Bank Angle Sensor in it that shuts the bike down in case of an accident it will shut down when the bike is knocked over.It should have reset.You might be able to disconnect the battery and reset it but you will probably have to take it ti the dealer to have it fixed electronically.

Posted on Mar 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My blinkers quit working after I laid it down


probably broke a wire or pulled a wiring connection out. Check the indicator relay. That may have been damaged and the fuse that protects the lights and indicators.

Sep 15, 2015 | Motorcycles

1 Answer

Speedometer rear lights and blinkers don't work. head light works fine 2006 Heritage


Check the Accessory fuse 15 Amp to see if blown If blown, check wiring under rear fender as it is common to get frayed wiring due to loom hanging down or a larger tyre than stock fitted and rubbing against wiring loom.

Dec 15, 2014 | 2006 Harley Davidson FLSTCI Heritage...

1 Answer

When key is in the start Position on a 2001 Suzuki Marauder 800 The head light is on both front blinkers and Tail light is on are the rear blinkers suppose to also be on?


your bike is a grey import with us spec's
on the European bikes the bikes have a on/off switch for the lights
on USA spec bikes they come on with the ignition
you may also have a red light that comes on
on your dash when you go over 80mph
your rear indicators are not meant to be on
hard work to change this about and
and is not for the faint hearted
unless you are a very competent person who knows what
they are doing leave it
rule of thumb is if it works dont fix it
it is ok for the European specs

Oct 19, 2013 | 2001 Suzuki VZ 800 Marauder

1 Answer

I have a 1996 gmc sonoma.The blinkers quit working.I tried the flasher and it showed that both sides were blinking.I turned off the flasher and tried the blinkers and they worked,well at least one time.I...


You have some burned out filaments. On dual filament bulbs the "blinkers" I am taking it to mean the turn signals. They are one filament. The "Flashing Caution lights, work on a relay circuit, which sends a larger amp current into the opposite filament then the turn signal. Check front & rear bulbs.

Sep 08, 2011 | 1996 GMC Sonoma

1 Answer

Blinkers on 98 firebird


could be a bad connection on the plug or a broken wire it could have corrosion on the connector

Aug 23, 2009 | 1998 Pontiac Firebird

1 Answer

Runnin lights dont work but blinkers do


The only running lights will be the front. Make sure there are 3 wires going to the front turn signals. If not then you have a set of rears on the front. The wire color for the running light side is blue. That can be ( or should be ) attached to an Orange/ white wire ( that is a typical key on hot for Harley ) I would also double check the ground on them as well, since the turn signal can actually pick up a ground by back feeding through itself, but would still not let the running light to work

Jun 27, 2009 | 2000 Harley Davidson XL 1200 S Sportster...

1 Answer

Rev counter


ello m8,, i see u have a few testers to try out by scorch there,, all i can anserw 4 yuh to your question,, is electronic rev counters if there is no cable,, work off the coils m8,, u can try a quick tester, by runnin a wire from the live or plus from one of the coils and touching it to the live of the rev counter,, bike must be runnin tho,,try that 2 m8,, cheers

Feb 28, 2009 | 2000 Sachs XTC Racing

Not finding what you are looking for?
2000 Harley Davidson XL 1200 C Sportster Custom Logo

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...