Question about 2003 Harley Davidson FLHTCUI Electra Glide Ultra Classic

2 Answers

Changin oil on a 2003 Ultra Classic

I took out the drain plug for the oil and drained it and when I refilled it I put in 1 quart and it started over flowing. The bike should take 4 Quarts, why is it full already?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You drained the Transmission! The trans drain plug is behind the oil drain plug....!!!

Posted on Jul 21, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

Are you sure you pulled the right plug. How much oil came out?

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

1 Answer

1st time changing oil on 2005 classic. looking for the drain plug also how much oil just for engine not trans, thanks


The oil tank for the engine is located on the bottom of the transmission. There are two drain plugs under the transmission. The engine oil drain is the drain plug closest to the front left of the oil pan. Slowly remove the plug and allow just a bit of oil to drain out so you can identify it as engine oil. It should be black, not clear. The engine holds three quarts of oil in the tank. Add the oil and then check it with the dipstick with the bike on the side stand. The dipstick has two marks on it. The upper mark is "FULL HOT" and the lower mark is "FULL COLD". Do not overfill.

Good Luck
Steve

Mar 24, 2011 | 2005 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Trying to change the oil in my 2003 road king classic. Took out the screws for oil to run out but nothing is coming out. Any ideas?


The oil tank is on the bottom of the transmission. If you look under the bike, the oil drain is drain plug closest to the left front of the tank. The drain closest to the center drains the transmission. Check the oil in both the engine and transmisson before starting the engine.

Good Luck
Steve

Jan 25, 2011 | 2003 Harley Davidson FLHRCI Road King...

1 Answer

What is the fluid capacity of the gear oil in a 1997 nissan 5 speed 2 wd truck


CAPACITIES
Engine, 2WDwithout filter..........3.5 quarts[1]
Engine, 4WDwithout filter..........4.0 quarts[1]
Cooling System, Initial Fill..........8.5 quarts
AMSOIL Antifreeze and Engine Coolant
Automatic Transmission, Total Fill..........7.4 quarts
Manual Transmission, 2WD..........4.2 pints
Manual Transmission, 4WD..........8.4 pints
Differential, 2WD Rear..........3.2 pints
Differential, 4WD Rear..........2.7 pints
Differential, Front..........2.7 pints
Transfer Case,..........4.6 pints

1. Add extra oil when replacing filter.
refill check oil level.

TORQUES
Oil Drain Plug.....22-29 ft-lbs
Transfer case
Fill Plug.....18-25 ft-lbs
Drain Plug.....18-25 ft-lbs
Manual Transmission
Fill Plug.....18-25 ft-lbs
Drain Plug.....18-25 ft-lbs

Oct 17, 2010 | 1997 Nissan Pickup

1 Answer

NEED TO KNOW HOW TO CHANGE ALL OILS 2005 Electra glied classes harley


The oil tank is on the bottom of the transmission. The engine oil drain plug is on the left front corner of the oil tank. Drain the oil, change the oil filter, and refill with three quarts of any approved 20W50 weight engine oil. Check the oil level using the dip stick. The dip stick is located on the right side of the transmission. The oil cap is a large cap (2" or 50mm in diameter) with knurled edges on it. The dipstich has two marks on it. The top mark is 'FULL HOT" and the lower mark is "FULL COLD". Keep the oil level between these two marks. Check the oil level with the bike on the side stand.

Good Luck
Steve

Oct 03, 2010 | 2003 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Oil change how to do oil change


take the drain plug off of the engine oil pan, let the oil drain. replace the oil filter. put the drain plug back on. refill with proper oil, usually around four-ish quarts.

Jul 30, 2010 | 2000 Volkswagen Golf

1 Answer

Where is the oil drain plug on 2007 Heritage Softtail Classic and how to change oil?


Look at the bottom of the oil tank from the right side of the bike. You'll see one hose or pipe that goes downwards towards the back of the transmission. The hose will follow the frame and come out way down low on the backside of and slightly under the transmission. There is a plug in the hose or pipe. Take the plug out and the oil tank will drain.

To change the oil, drain the tank, change the oil filter, refill with three quarts of oil in the tank. You also have oil in your primary that should be changed every 5000 miles or so, and the transmission serviced at the same interval as the primary.

To drain the oil on the primary, there is a drain plug under the primary case at the very rear of the case. Remove this to drain the case. Refill the primary through the derby cover. Fill with oil until the level is just to the bottom edge of the clutch spring. 38-42 ounces of oil. Do not overfill or the clutch will drag and make finding neutral with the engine running impossible to find.

To drain the transmission, there is a small plug on the bottom side of the chrome cover on the right side of the transmission. Remove the plug, drain the tranny, and refill through the large plug that takes a hex key in the chrome cover. 20-24 ounces of transmission lube.

Good Luck
Steve

Apr 01, 2010 | 2005 Harley Davidson FLSTC - FLSTCI...

1 Answer

How do I change all my fluids on a FLHTC 2005


There are three areas that you have to service, engine oil, primary oil, and transmission.

To change the engine oil, underneath the transmission, you'll find two drain plugs. The drain plug nearest the left side of the engine is the the engine oil drain. Warm the engine a bit and drain the oil. Change the oil filter. This is a messy job so put something down to catch the oil as it runs out of the filter. Replace drain plug and refill with oil.

The plug nearest the center of the transmission is the transmission drain. Remove the plug to drain the transmission. Once drained replace the plug and refill the transmission through the transmission fill hole in the chrome cover on the right side of the transmission.

To change the primary oil, underneath the primary outer cover very near the rear of this cover is a small drain plug. It takes a Torx wrench to get the plug out. Remove the plug to drain the oil from the primary. Remove the derby cover over the clutch. Refill with oil through the derby cover hole.

Your bike probably came with H-D Syn3 oil. You can replace the oil with this or any other oil as long as it carries a rating for use in a diesel engine. Here, it must have an API code of "C", example "SJ/CG4". Four quarts of engine oil, Add three quarts of oil and check. Fill to proper level with the fourth. Your dipstick is marked with a "Full Cold" and "Full Hot" mark. Fill to "Full Cold" mark and check again after warming up the engine.

Use Syn3 in the primary or 30 weight oil, 40-44 ounces. With the bike standing nearly straight up, the fluid level should be to the bottom of the clutch spring, large black disc in the center of the clutch. It's a diaphragm type spring.


Use Syn3 in the transmission, 20-24 fluid ounces. Check with the dip stick again with the bike standing straight up.

Nov 04, 2009 | 2005 Harley Davidson FLHTC - FLHTCI...

1 Answer

How to change trans oil fxdwg


The transmission oil is drained through a plug on the bottom of the transmission. There are two plugs under the transmission. The one closest to the center is the transmission drain plug. The one closest to the left side of the bike is engine oil.

Drain the transmission and refill with 20-24 ounces of Harley-Davidson semi synthetic transmission lube or Syn3. The filler plug is on the right side transmission cover. There is a dip stick on this plug. Make sure you've got the correct amount of lube in the transmission.

If you drain the engine oil by mistake, refill with Syn3, three quarts I think. Put in three and check, it may take four quarts.

Oct 27, 2009 | Harley Davidson FXDWG Dyna Wide Glide...

1 Answer

How to change oil on 2007 harley davidson flhtcui


On the earlier dressers (Evolution engines), the oil tank is on the bottom of the transmission. If you look underneath the transmission, you'll see two drain plugs. The one closest to the left side of the bike is the engine oil drain, the one in the center is the transmission drain.

Ride bike to warm the oil up and then remove the drain plug. Let old oil drain out. Remove and replace oil filter, simply screw the old one off and screw the new one on. This is a messy job. Oil goes everywhere. I cut a plastic milk jug so it will fit around the bottom side of the filter to catch most of the oil.

Refill oil tank with the prescribed amount of oil, on that bike, I think that's four quarts. Pour in three and check the level, if still low, add the last quart. I think they bike came with H-D Syn3 from the factory.

Oct 23, 2009 | 2005 Harley Davidson FLHTCUI Electra Glide...

Not finding what you are looking for?
2003 Harley Davidson FLHTCUI Electra Glide Ultra Classic Logo

689 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...