Question about 1994 kawasaki ZZR 400

1 Answer

I have a wr426f yamaha bike that wont start at all. i checked the spark plug and usually there will be oil all over it after kicking it with out a start but its clean. i filled it up with oil and it still wont even try to start. any help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 353 Answers

Check your fuel system

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamaha blaster 2001


No fuel or no spark. Quick test: spray some starter fluid into air intake and try to start it. If it runs and then dies, you've got spark but no fuel. If the bike quit with no prior symptoms, check spark plug wire not knocked loose, fuel filter clogged. (You do have gas, right?)

May 20, 2014 | Sport & Outdoor - Others

1 Answer

Ttr 125 will kick over but not stay started


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Faulty main circuit breaker and or connections.
4. Faulty ignition coil and or connections.
5. Faulty spark plug, oil or gas fouled, wrong heat range or service type, wrong gap, loose in the cylinder head, broken electrode or insulator.
6. Faulty spark plug cables, leaking or broken, internal damage check for spark leakage in the dark.
7. Faulty ignition module, switch, CKP, MAP, CMP, sensor and or any connector in the ignition circuit could have corroded, loose, or broken pins/sockets
8. Burnt exhaust valve or air leak in the exhaust system.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
TTR125 Starting Idling issues TTR
TTR125 hard start problem FIXED
YAMAHA TT R125 Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-tt-owners-manuals

Apr 17, 2014 | 2002 Yamaha TT-R 125

1 Answer

2001 yamaha yz80 backfires and wont start


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Faulty main circuit breaker and or connections.
4. Faulty ignition coil and or connections.
5. Faulty spark plug, oil or gas fouled, wrong heat range or service type, wrong gap, loose in the cylinder head, broken electrode or insulator.
6. Faulty spark plug cables, leaking or broken, internal damage.
7. Faulty ignition module, switch, CKP, MAP, CMP, sensor and or any connector in the ignition circuit could have corroded, loose, or broken pins/sockets
8. Burnt exhaust valve or air leak in the exhaust system.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Bike won start just backfires occasionally
01 FZ wont start after back fire FZ1OA Message Board
Yamaha YZ125N1 Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Apr 12, 2014 | 2003 Yamaha YZ 125

1 Answer

2001 Yamaha WR 426 F no spark


Hi, Jason and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Tilt sensor needs a reset.
10. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Wr426 has no spark
How to fix No Spark Problem on Motorcycles and Dirt Bikes
YAMAHA WR426F Owner Service Manual
OEM parts for Yamaha
YAMAHA WR450F Owner Manual

Jun 10, 2017 | 2001 Yamaha WR 426 F

2 Answers

Still wont stat new piston plug storor cdi coil no luck help


So you've tested a spare spark plug sitting outside grounded to cylinder and you defintely have good spark?
If so....is it getting fuel? Is the enricher (choke) working?l

Apr 04, 2011 | 2003 Yamaha YZ 125

1 Answer

Take to long to start.. takes almost ten minutes of kick starting... electric starter wont turn over to start bike yamaha ttr 125


The TTR-125 Carburetor's Run Lean by design. Mine had the same issues till I found a post on Thumpertalk.com on Carb and air box Mod. This is a good starting point on gets; 110 and 112.5 main and 17.5 pilot. But you must check spark plug coloring to make sure the jetting is correct. Check spark plug after the bike has been ridden for a wile. I also took out the stock baffle and replaced it with exhaust tip and now it fires up after a few kicks and worms up in a few minutes.

Dec 15, 2010 | 2005 Yamaha TT-R 125 L

1 Answer

Cant get my 125cc motor bike going for the first time


hummm check your electrical connections make sure you have the stop run switch is in run position,you have fuel flow to the carb, make sure you are getting spark to the spark plug by using a extra spark plug remove the plug cap and ground it to the head and kick start the engine and see if you are getting spark to the plug.
hope this helps

May 05, 2010 | 2001 Yamaha TW 125

1 Answer

Bike wont start


that shouldn't stop it from starting unless they were hanging out. in wich case you wouldn't be able to kick it over. you would see signs of oil leakage too. do you have fresh gas and good spark at plug?

Apr 02, 2009 | 2003 Yamaha YZ 125

3 Answers

Yz 250 wont kickstart


Hi!
You obviously look after your machine and very sensible when laying up, however as you are probably aware 2 strokes rely heavily on compression, A. to produce excellent combustion and B. to draw fuel into the chamber. So when you try kick starting you can't get enough revolutions to draw the correct amount of fuel into the cylinder, where as you push start you constantly turn over the engine increasing compression slightly and bingo it fires.
Can you remember how when kick starting it before this problem the feel on resistance when kicking over? has it now become a lot easier? if so you possibly have worn or broken compression piston rings.
A compression test will reveal this, I hope this sorts your query?
Press the Blue button please for my FREE effort,
Thank You!
Paul 'W' U.K.

Feb 06, 2009 | 2000 Yamaha DT 125 R

8 Answers

Yamaha yz125 wont start...


you should try cleaning your carb i dont know how often you clean your air filter but if you havn't done that you should do it also.after you do that turn the gas on lean it over till gas runs out the over flow and give it choke no gas and try kicking it over.you should be able to just loosen up the clamps on each side of the carb and twist it so you can get to the float bowl,unscrew the four screws and blow it out with a air nossle you can try that before you go through the troubles of taking it off to clean it.

Nov 22, 2008 | 2003 Yamaha YZ 125

Not finding what you are looking for?
1994 kawasaki ZZR 400 Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...