Question about 1982 Honda GL 1100 Gold Wing

2 Answers

Where is the bleed valve for the rear brakes/82 gl1100?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Behind the left saddlebag

Posted on Mar 06, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 138 Answers

Bleed valve/s will be on the rear caliper which is/are mounted over the rear disc/s.

Posted on Jul 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I converted my 82 jeeps manual brakes over to power now dont have a full pedal why?


You need to use the valve on the frame. If you can't bypass the one on the booster, you'll have to get a booster off an older model.

Aug 31, 2014 | Cars & Trucks

1 Answer

82 honda aspencade 1100 wont run after its hot?


Hi, Anonymous and the usual suspects are:
1. Faulty ignition coil.
2. Faulty spark plug cables.
3. Faulty temperature sensor.
4. Faulty starter motor.
5. Valves adjusted too tight.
6. Spark plug gap too wide.
7. Fuel has vapor lock.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1982 Aspencade runs terrible when warm
Starting Problems when hot GL1100 Information Questions goldwingdocs com
Honda GoldWing GL1100 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Gold Wing GL1100 Owner Manual

Apr 27, 2014 | 1982 Honda GL 1100 Aspencade Gold Wing

1 Answer

82 honda aspencade wont run after its hot?


Hi, Anonymous and the usual suspects are:
1. Faulty ignition coil.
2. Faulty spark plug cables.
3. Faulty temperature sensor.
4. Faulty starter motor.
5. Valves adjusted too tight.
6. Spark plug gap too wide.
7. Fuel has vapor lock.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1982 Aspencade runs terrible when warm
Wont start Was running before GL1100 Information Questions goldwingdocs com
Honda GoldWing GL1100 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Gold Wing GL1100 Owner Manual

Apr 27, 2014 | 1982 Honda GL 1100 Aspencade Gold Wing

1 Answer

1981 Honda GL 1100 Gold Wing bleeding brakes


Hi, Steve for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bleeding Brakes GL1100 Information Questions goldwingdocs com
Brake Bleeding on Honda Goldwing
Honda GoldWing GL1100 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Gold Wing GL1100 Owner Manual

Oct 04, 2012 | 1981 Honda GL 1100 Gold Wing

1 Answer

1981 Honda GL 1100 Gold Wing how to bleed brakes


Hi, Steve you are not closing the bleeder valve before releasing the lever watch the video, for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bleeding Brakes GL1100 Information Questions goldwingdocs com
Brake Bleeding on Honda Goldwing
Honda GoldWing GL1100 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Gold Wing GL1100 Owner Manual

Sep 30, 2012 | 1981 Honda GL 1100 Gold Wing

2 Answers

1983 Honda GL 1100 brake calipers are dragging


Hi, Scott and the usual suspects are:
1. Caliper, bracket, wheel, or brake disc not properly spaced.
2. Contaminated caliper causing the piston to stick.
3. Wrong type of brake fluid causing seals and o-rings to swell.
4. Wrong brake pads for the caliper.
5. Improper free play at the master cylinder.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Rear brake problems GL1100 Information Questions goldwingdocs com
Sticky Goldwing Motorcycle brake calliper fix DIY
Honda GoldWing GL1100 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Gold Wing GL1100 Owner Manual

Apr 21, 2012 | 1983 Honda GL 1100 Innerstate Gold Wing

1 Answer

Trouble bleeding front brakes on GL1100 (1981), no apparent leaks & tried new master cylinder, any ideas please


If there is air in the master cylinder ,then it will not pump fluid. Try loosening the banjo bolt holding the brake line onto the master cylinder and pumping the lever a couple of times till the brake fluid gushes past the sealing washers. Then tighten the banjo bolt and bleed the lines. Once the master cylinder is pushing DOT 3/4 brake fluid then bleeding the lines should be easy.

Sep 21, 2011 | 1981 Honda GL 1100 Gold Wing

1 Answer

I am having a problem bleading my 2000 grand pris brakes. check all the brake line no leaks but when i bleed the brabe pedal coes to the floor. i have also bleeb frunt to rear and rear to frunt.


This is a two person job. You have one push the brake pedal to the floor and hold it there. Then the other opens the bleed valve until brake fluid comes out. Close the bleed valve and have the other person release the brake pedal. Repeat. Continue doing this on each brake bleed valve until there is no more air coming out of the lines at each bleed valve just a solid stream of fluid. Fill master reservoir back up with brake fluid as needed through the process. You bleed from farthest to closest meaning from rear to front.

Aug 04, 2010 | 2000 GMC Sierra

1 Answer

Driver side brake not bleeding properly after bleeding left side and changing rotors, calipers, and pads?


first of all make sure master cylinder is full of brake fluid.then you crank car leave foot off brake pedal. watch abs light on dash it should turn off in 10 seconds if not have car towed to garage or dealer. they have to use a scanner to scan the abs brakes if abs light turn off in 3 seconds. then starting bleeding from master bleed the lower brake line fitting at the proportional valve followed by the upper brake line fitting. keep eye on brake fluid in mastercylinder dont let run dry.next prime the abs hydralic modulator.connect the bleeder hose to the rear bleeder valve on the modulator.place the other end into a container partially filled with cleab brake fluid.make sure the end of the hose is submerged.open the bleeder valve slowly about 1/2 to 3/4 turn have an assistant depress the brake pedal and hold it in the depressed position. when the flow of fluid ceases close the bleeder valve.repeat process until no air bubbles are present in the fluid.then tighten the bleed valve securely. start bleeding brakes. your bleeding sequence is right rear - left front - left rear - right front.WARNING IF ALL FAILS YOUR BRAKES DONT FEEL SOLID AND FEEL VERY SPONGY.DONT DRIVE CAR. HAVE IT TOWED TO DEALERSHIP.THEY WILL HAVE TO PRESSURE BLEED YOUR BRAKE SYSTEM.

Nov 17, 2009 | 1999 Oldsmobile Alero

1 Answer

BLEEDING REAR BRAKES CAN BLEED ONCE THEN SECOND TRY THE PEDAL WILL NOT MOVE AFTER BLEED VALVE OPENED . IF YOU WAIT 3 OR 4 MINUTES CAN BLEED AGAING PEDAL WILL MOVE BUT WILL NOT GO TO THE FLOOR. BRAKES ARE...


Sounds like a problem with the proportioning valve. Try not to push the pedal down to far when bleeding. The valve sounds like it is getting stuck closed, and takes a little bit to release and allow fluid to pass again.

Jun 10, 2009 | 1989 Chevrolet C1500

Not finding what you are looking for?
1982 Honda GL 1100  Gold Wing Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...