Question about 2003 Yamaha TW 200

1 Answer

I have a 2003 Yamaha TW 200 and it starts and runs fine, but as soon as i put it in gear it dies. I have checked continuity on the clutch switch and it is working I have also checked the neutral switch and that wire gets voltage when i put it in gear and no power when its in neutral. Im not sure ware to go from here is there a relay for them i dont have a book.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 207 Answers

See if there is a saftey switch on the kick stand that is probally your problem also chek the clutch cable adjustment put in gear pull the clutch and try to push it if its hard or locks up you need to adjust your clutch cable

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 yamaha fazer 1000 clutch sensor problem?


Hi, Anonymous #7 is jumping up and down waving a red flag and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Stalls when put in first gear
http://www.r1-forum.com/forums/101-98-99-r1-mechanical-help/285146-bike-dies-when-1st-gear-engaged.html
Yamaha FZS1000 2001 Service Manual
OEM parts for Yamaha
YAMAHA FZS1000 Owner Manual

Apr 06, 2012 | 2003 Yamaha FZS 1000 Fazer

1 Answer

Was riding my 2001 yamaha blaster and in was always bogging down and stalling cleaned carb twice every nook an cranny got it started still dies out and then when it died this tim it wont start and it has...


Hello, try to switch the petcocok into reserve mode. Mine TW has pretty soon problem with level of fuel in tank.I think the reserve level is set too high.

Mar 11, 2012 | 2001 Yamaha TW 200

1 Answer

Start good, Put in gear leave clutch out shuts off. kit stand up


sounds like the kick stand switch is stuck. try shooting some carb cleaner in it to remove gunk. You can verity by checking the switch's continuity with a VOM or just jumping with a paper clip.

May 27, 2011 | 2005 Yamaha TW 200

1 Answer

The bike starts only when place in nutural, and sometimes in gear when the clutch is pulled in. Many times it starts I pull the clutch in to put in 1 or 2 it does not matter it dies when I place it in...


The clutch is not releasing sufficiently, it seems.

Alternately, some bikes will not run in gear if the kick stand is down. If the switch for that is not pushed sufficiently when the stand is up, you can have this problem.

Jul 02, 2010 | 2003 Yamaha TW 200

1 Answer

Engine dies as soon as I put it into gear.


check that the side stand switch works with a multi meter. make sure you havent pulled a wiring plug apart when working in the carbs

May 19, 2010 | 1982 Honda VF 750 S

1 Answer

1982 yamaha xj650 starting


Check the electrical switch in the clutch lever, most bikes have one as a safety, so you cant start it in gear, unless the clutch is in, could be a faulty switch, also do you have a switch on your side stand, sometimes these can be faulty as well.

Apr 17, 2010 | 1982 Yamaha XJ 650

2 Answers

Yamaha tw200 clutch


hi buddy,

its time to change your clutch kit, here's the best one for your TW200
http://www.starcycle-usa.com/servlet/Detail?no=12114

Jul 15, 2009 | 2002 Yamaha TW 200

1 Answer

Yamaha tw200 2003 dies giving gas. idles fine. wtf!


You are getting enough fuel. ck for trash in your carbs

Jul 07, 2009 | 2001 Yamaha TW 200

2 Answers

I have a 1997 tw200. It runs and idles fine, but the second I put it into gear it dies. It sounds electrical not mechanical. Rode the bike less than a week ago and it ran like a top. I even tried going...


Sound like it could be a problem with the side-stand cut-off switch. (It is to prevent you riding away with the side-stand down.) They are notorious for getting crud in them and sticking.

Hope this helps!

Jun 18, 2009 | 2005 Yamaha TW 200

1 Answer

2008 Yamaha TW 200 clutch will not engage


Hi, Tony225 for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha TW200 Trailway Discussion Forum
clutch problem
Yamaha TW200 Service Manual
OEM parts for Yamaha
YAMAHA TW200E Owner Manual

Apr 22, 2009 | 2005 Yamaha TW 200

Not finding what you are looking for?
2003 Yamaha TW 200 Logo

Related Topics:

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...